Installation of metal-plastic windows is a matter that requires accuracy and experience. That is why it is better to trust the experts. Experienced installers will do their job quickly, efficiently, in compliance with the installation technology and safety precautions.
How is the installation of plastic windows?
To begin with, the old frame is removed and the opening is cleared for the installation of a new structure. Upon receipt of a complete set, it is recommended to visually inspect the products for scratches, cracks and chips. The frame must be in a protective film, which is subsequently removed. Fastening of the product is possible on anchors and plates. It all depends on the design of the window and the material of the wall in which the opening is located. Mounting foam is blown between the frame and the wall for sealing and insulation.
Choice of plastic windows
Modern advertising and marketing puts the consumer in front of a huge selection of PVC products. To choose windows that suit you both in terms of quality and price, you need to know a few rules:
- choose a manufacturer of PVC products that has been operating in the market for the production of metal-plastic windows for a long time and has proven itself over the years of its existence. Beware of one-day firms that entice with low prices and short terms of manufacturing and installation of products. Usually, such firms do not produce their products according to the State Standard and in improper conditions;
- if your apartment is corner or your windows overlook a busy highway, then you need an increased level of sound and heat insulation. These conditions will provide you with a double-glazed window and a profile with 5, 6 or 7 cameras. The double-glazed window does not freeze through in the cold and keeps the room warm for a long time. The wide profile also affects sound and heat insulation;
- do not skimp on the quality of components. Choose high-quality fittings, because its operation will be frequent and long-term. Accessories must have the manufacturer's logo. The sash of a window should open and close with ease, as well as rotate from the normal position to the top opening position (if specified in the contract);
- installation of metal-plastic windows must be carried out at an outdoor air temperature of at least -10 degrees;
the quality of metal-plastic windows largely depends on the technology of its production. Pay attention to the surface of the profile - it should be smooth, even and have a slightly milky tint. The double-glazed window must be absolutely tight and have a tightadjacent rubber seals. If you look at a double-glazed window in a section, then inside you will see strips filled with silica gel - a substance that can absorb moisture. The frame must be equipped with holes through which air is exchanged and excess condensate is eliminated;
Installation of metal-plastic windows should be carried out by experienced specialists who have the appropriate skills and have all the necessary equipment. Don't forget about the manufacturer's product warranty.