Garden chopper is an indispensable tool for gardeners and gardeners. This device is a metal sheet, neatly attached to a wooden pole at an angle of 70-90 °. The edges of the tool are very sharp and can have different shapes. When working in the garden and in the garden, various garden tools are required. Choppers can be arcuate, trapezoid and even triangular. The most important thing is that the tool should be comfortable in the process of using it, light, but at the same time strong enough.
If desired, such a device can be made independently. It is not necessary to buy special materials and tools in the store for this. A garden chopper can be made from other tools that have fallen into disrepair, such as a shovel, a hacksaw, or an ordinary sheet of metal. The process takes a minimum of time. But at the same time, a reliable tool is obtained that does not cause any particular difficulties during operation.
Do-it-yourself garden chopper from a shovel: easy and simple
A garden chopper can be made from an old shovel that no one uses anymore, but it's a pity to throw it away. For this you will need:
- Sandpaper.
- Metal pipe, diameterwhich is three centimeters long and 25 centimeters long.
- Handle made of wood. It is advisable to use a blank made of pine, ash or oak.
- Shovel.
- Drill.
- Bulgarian.
- Clamp, bolt or nails.
- Rivets.
Production process
So, how is a garden chopper made? Most often, broken shovels are used to create. To make the tool convenient, the material must be prepared. To do this, it is necessary to cut off everything superfluous from the blade of the former shovel. It is best to do this with a grinder. You need to remove the top fasteners, as well as 1/3 of the top edge. All cuts should be well sharpened. In addition, the part should be sanded.
To make the chopper comfortable, you need to attach it to the handle. This will require a mounting system. To do this, take a metal pipe and flatten one end of it. After that, the deformed side must be bent at an angle of 90 °. In this case, certain proportions must be observed. The distance from the flattened edge to the fold should be at least 6 centimeters. Two holes should be made on a flat area. They can be made with a drill and a drill. Exactly the same holes must be made in the upper part of the metal sheet, which used to be a shovel. You can connect the material and the holder with rivets or bolts.
Final stage
The garden chopper is almost ready. It remains to fix it on the handle. To attach the cutting, it is necessary to make a small hole in the second part of the deformed pipe. After that, the wooden pole needs to be sharpened. The handle prepared in this way is simply driven into the pipe, and then fixed with a nail. In this case, use a hardware whose diameter is wider than that of the hole.
Hacksaw hoes
To make a tool you will need:
- Sandpaper.
- Bulgarian.
- Hacksaw.
- Metal pipe.
- Handle made of wood.
- Metal corner.
- Rivets.
- Bolts.
- Drill.
How to
Almost everyone on the farm has broken saws. In many cases, the metal remains sufficiently elastic and strong. It is these qualities that a garden tool should have. For the manufacture of choppers, you can use the widest part of the canvas with a width of 25 centimeters and a height of at least 8.
First you need to prepare the metal. To do this, you need to cut a blank of the required size from the canvas of the former hacksaw. The edges of the product should be treated with sandpaper. After that, up to 4 holes must be made in the workpiece. In this case, it is worth stepping back from the edge by one centimeter. The distance between the holes must be the same. The same must be done on one side of the corner.
In order for the garden chopper to perform its functions well, it is necessary to think over all the fastenings. To connect the workpiece from the saw and the wooden handle, you can use a metal pipe. one of herside needs to be flattened. After that, you need to make several holes. The distance to them from the edge should be at least 5 centimeters. Exactly the same holes should be made in the second part of the corner.
Assembling a chopper
When all the details are prepared, you can begin to assemble the structure. The tube with the deformed side must be connected to the corner to which the blade of the old hacksaw or saw is attached. You can fix the parts with rivets or bolts.
You also need to make a hole in the pipe on the second side. It is needed to fix the wooden handle. After that, it is necessary to drive the cutting into the pipe. Drive a nail into the prepared hole. The garden chopper, the photo of which is presented above, is ready to go.
It is not necessary to cut saw teeth. They can be stored at the top of the blade of the finished tool. This will allow you to use it for loosening the upper layers of the soil. If necessary, the corner can be fixed a little lower. In this case, the teeth will protrude a few more centimeters.
In conclusion
The hoe is more than just a handy tool. She is universal. After all, with its help you can weed not only flower beds, but also ordinary beds where vegetables grow. The main thing when working is not to damage the stems and roots of the grown plants. In this case, the radius of coverage of actions is determined by the length of the handle. The longer the handle, the less you have to move around.
If you wish, you can make your own garden chopper. It takes a littletools and materials. As a basis, you can use a sheet of metal, an old saw, a hacksaw, and even a shovel.
