Experts do not recommend using pseudo-workshops that provide battery replacement services. It is better to contact the official service center, where professionals in their field can change the battery on the iPhone 6 or another model in a matter of minutes. However, users can save a lot by changing the battery themselves.
General information
In the modern rhythm of life, not all users have the opportunity to adhere to the norms of proper smartphone recharging. As a result, many people have a question about how to change the battery and restore the phone's performance.
This is because the battery can't handle the heavy load. However, do not give up, because to solve this problem, it is enough to change the battery on the iPhone.
When and why do you need to change the battery?
Apple's mobile devices are called long-lived due to their high quality and durability. All iPhones, especially models built under StevenJobs, impress with excellent assembly and can work without problems for several years. However, some owners underestimate the excellent quality of mobile devices and rush to purchase improved models.
It is not always necessary to get rid of the gadget when the first failures appear, since it is enough to change the battery in a mobile phone. It is important for smartphone owners to know that the useful life of a Li-Ion battery is measured in 3-5 years. After this period, it is recommended to replace the battery.
How to change the battery?
First you need to prepare the necessary tools. The user will need to purchase an original battery with an adhesive tape holder. In addition, you must have a rubber mat, a Phillips screwdriver, a plastic spatula and tweezers on hand. Before replacing the battery, turn off the iPhone by holding the Power button. Then you will need to unscrew the bolts located on the bottom of the mobile device with a Phillips screwdriver. To open the phone, you can use the usual suction cup, which you need to stick to the display just above the HOME button. A similar manipulation can be carried out with the help of any object with a sharp tip. At this stage, do not rush and open the display module with sudden movements. Then you should unscrew the two bolts and remove the metal plate. The next step is to deal with the loops. You need to be very careful, because you only need to unhookcable connector, and not all together with the connector. The owner of the gadget needs to carefully disconnect the cable of the HOME button, touchscreen and display. Finally, you can release the display module and set it aside.
Using a plastic tool, pry up and disconnect the battery cable. Armed with tweezers, you need to pick up the black tab of the adhesive pad. It is very important to carry out this manipulation carefully. If the tape is hard to pull out, you need to make sure that it overtakes the right corner of the battery. It is necessary to pull the tape until it completely appears. Then you should do the same manipulations with the second tape. If there is resistance when pulling, you need to pull the tape so that it goes around the left corner of the battery.
If one of the ribbons is torn, do not despair. It is enough to warm up that side of the case, which is opposite to the place where the battery is attached. To do this, you can use a regular hair dryer. Such actions will help loosen the adhesive layer. The battery can be pry off with any flat object. Experts do not recommend touching it from the side of the motherboard, as this can damage the gadget. As a result of the manipulations, the battery will easily peel off from the gadget body. At the final stage, you can unpack the new battery and install the battery in place. In order for the battery to sit tightly, it is recommended to press a little on it. Then you should reassemble the mobile device. The presented instruction givesthe answer to the question of how to change the battery on the "iPhone-6".
Check battery wear
Any battery provides a certain number of charge cycles. On average, an iPhone battery is rated for 500 full cycles. After that, the battery does not stop functioning, however, it produces a smaller charge of power, which gradually decreases. In this regard, many users have a question about how to change the battery and ensure the normal functioning of the gadget?
User can independently test the battery and set the wear percentage. To do this, use the special program coconutBattery. This application will let you know how many charging cycles have occurred in your smartphone, as well as the actual capacity. The information received will help you change the battery in your iPhone in a timely manner.
Effects of battery wear
In plastic "iPhones" the user can observe a change in shape, which over time will become more convex. Minor cracks may also appear on the body, increasing in size. In the case of more modern iPhone models, you can observe a slight protrusion of the screen. Therefore, if streaks are visible when you press the display, it is recommended to immediately change the battery on the iPhone.
Sometimes device owners can visually identify a damaged battery. Some users have a batterygreatly increased in size and even opened the lid of the gadget. In addition, a damaged battery can cause an unpleasant odor. Do not bring the battery to such a state. Experts recommend timely replacement of the battery. Otherwise, the iPhone case may be severely deformed or the device may spontaneously ignite.
Summary
Over time, the battery becomes unusable on all mobile devices. Battery life depends on proper charging, usage and storage conditions.
If the "iPhone" is not used for a long period of time, the battery may become unusable in one year. With theoretical knowledge, you can change the battery in a matter of minutes. The article outlines all the subtleties and nuances that describe this process in detail. All manipulations must be carried out carefully and carefully, despite the fact that the smartphone is assembled with high quality and very strong.
