Profiled C8: specifications, photos

Table of contents:

Profiled C8: specifications, photos
Profiled C8: specifications, photos

Video: Profiled C8: specifications, photos

Video: Profiled C8: specifications, photos
Video: So You Want A Chevrolet Corvette C8 2024, November
Anonim

Today, building and finishing materials on the market are presented in a huge assortment. Each of the proposed nominations is divided into certain categories, united by common properties. Among sheet materials, C8 corrugated board is the most popular. Specifications meet all the requirements of SNiP, which ensures the demand for it.

corrugated board s8 technical characteristics
corrugated board s8 technical characteristics

What is corrugated board and its classification

This material is metal sheets with different parameters. The thickness can be from 0.1 cm to 0.7 cm. Their surface is mainly corrugated, wavy: the height of the ridge reaches 0.8 cm, the width is 3-5 cm. The length of the sheets in some cases reaches 7 m, and the width can be:

  • 1 m;
  • 1, 25m;
  • 1, 50m.

Has C8 corrugated sheet technical specifications based on the fact that galvanized sheets are used in the manufacture of this type of product.

corrugated board s8 characteristics photo
corrugated board s8 characteristics photo

Advantages of C8 corrugated board

This type of sheet metal has the following properties:

  • moisture resistance;
  • strength;
  • reliability;
  • wear resistant;
  • practicality;
  • fire resistance;
  • frost resistance;
  • wide range of shades;
  • diverse range of applications.

In addition, the material is quite easy to install.

Moisture resistance of the product

The most common metal for performing any repair and construction work in the open air is C8 corrugated board. Specifications begin with a moisture resistance indicator. It is unable to absorb moisture. This is due to the dense structure of the material.

corrugated board s8 characteristics
corrugated board s8 characteristics

Note. It is worth considering that this characteristic is enhanced by a reliable coating - polymer paint. Otherwise, corrosion may appear on the surface of the corrugated board.

Strength and reliability

Iron has long been considered the most durable material. It is able to withstand significant mechanical and physical stress. Has professional flooring C8 technical characteristics similar to any sheet metal. Depending on its thickness, the strength index also increases.

This building material is resistant to impacts and other influences. It is impossible to cut it without the help of special equipment.

Durable and practical

Due to the fact that the material qualitatively protects against various influences, C8 corrugated board has high performance characteristics. It does not change its appearance for quite a long period of time. Its service life is at least 15years.

It is also worth noting that the installation of sheet corrugated board can be done independently. The material does not require special care, as the smooth polymer coating is durable.

corrugated board s8 technical characteristics Yekaterinburg
corrugated board s8 technical characteristics Yekaterinburg

Fire resistance and frost resistance

These are the main technical characteristics of C8 corrugated board. Thanks to them, the metal can be used for outdoor repair and finishing work. It does not burn, does not melt under the influence of sunlight and high temperatures. Moreover, it does not deform in the cold.

Important. During the installation of the material, it must be taken into account that the metal is subject to linear expansion-compression at high and low temperatures.

Variety of shades and textures

Even in a variety of colors, C8 profiled flooring has characteristics. The photos clearly demonstrate this. Shades can be anything. It all depends on what kind of protective and decorative coating was chosen.

For example, a manufacturer can use a simple polymer paint in production, which is applied on one or both sides of the sheet in a special chamber under high temperature. In this case, the surface of the material becomes smooth and matte. Then varnish is applied to it, which will give the corrugated board a gloss.

Quite often, powder paint is used, which is applied in a similar way. It is only worth considering that such sheet metal cannot be subjected to rough mechanical stress. Although this coating hasC8 corrugated board technical characteristics (Yekaterinburg is the largest manufacturer of high-quality rolled products) of a high level, the paint itself has one, but a significant drawback. It is easily damaged and cannot be repaired by itself.

Note. In order to give the material its original appearance again, you need to seek help from specialists who can remove the old coating and apply a new one, since it makes no sense to restore the damaged areas separately. The coating will begin to flake off.

When applying powder paint, the surface of the corrugated board will be rough. It can also be found on sheets of imitation of various building and finishing materials (ceramic tiles, bricks and much more).

Spectrum of material application

Since C8 corrugated board has excellent technical characteristics, the photo shows only one of its areas of application. It can be used:

  • in the manufacture of fencing;
  • in the facade cladding of the building;
  • as a roofing material and more.

There are only differences in the installation of the material. For example, when installing roofing, it is better to mount corrugated board on a wooden crate. But in the manufacture of fences, a frame made of metal pipes is used. Fasten it to any base with rivets. You can also use sealant.

corrugated board s8 technical characteristics photo
corrugated board s8 technical characteristics photo

Material imperfections

In addition to the visible advantages that C8 corrugated board is endowed with, it has one, but a significant drawback. Ironis an excellent conductor of sound. In particular, when roofing, it is necessary to lay soundproofing. Metal is also considered cold. This means that insulation of the entire structure is also required.

Recommended: