Today, you can find air conditioning and heating systems in a large assortment on sale, they allow you to regulate the conditions of the internal environment of the premises and maintain a comfortable microclimate. Most of them are effective only in a small area, at home. They are characterized by a high level of energy or fuel consumption. Especially for such cases, industrial heating systems were developed, among them water fan heaters can be distinguished.
Such heating systems are characterized by low efficiency in terms of the time required to warm up the premises. The best option for workspaces and residential buildings are water fan heaters, which combine the basic principles of an air-to-water heating system.
Overview of characteristics of fan heater Polaris PCDH 1715
You will have to pay 1100 rubles for this model. The device works on the basis of a ceramic heating element; during operation, the user can use the unit in such a wayso that it functions in one of three intensity modes. Rated power is 1500W. The dimensions of the device are small: 16 x 16 x 18 centimeters, which corresponds to the width, depth and height.
Characteristics of the heater Electrolux EFH/S-1115
If you are interested in water fan heaters, then you can pay attention to this model, which costs only 1000 rubles. The device works due to a spiral heating element, and the rated power is 1500 watts. The dimensions are slightly larger compared to the device described above and are 17.5 x 13.5 x 25.1 centimeters. Water fan heaters of this type are purchased by consumers quite often; they can be used to heat a room with an area of 16 square meters. You can warm up the room in a short time using the necessary power modes.
The only negative may be a fairly high noise level during operation, but it is acceptable. However, almost all fan heaters sin with this, which is especially true for industrial models. This water fan heater may give off odors for the first 2 minutes, which then disappear. An additional advantage is that the device does not dry the air.
Main features of the Teplomash KEV-40T3, 5W3 brand fan heater
If you need a more powerful device, you canpurchase water fan heaters "Teplomash". The above model, for example, costs 18,500 rubles. This fan heater is intended for heating administrative, industrial, office and warehouse premises. The installation is universal, that is, the device can be mounted both horizontally and vertically, which expands the scope of use. Water fan heaters "Teplomash" are mounted using a bracket, which provides the ability to adjust the angles of rotation and inclination of the unit. Adjustable louvers can direct the air flow to the desired area. Water fan heaters of this type are industrial devices, they are powered by a 220 volt network. Air consumption per hour can vary from 800 to 1600 cubic meters.
The isothermal jet has an effective length of 12 meters. Before purchasing such a device, it is worth considering that it provides for the need for free space, the length, width and height of the fan heater are 480 x 318 x 408 millimeters. You may need outside help to carry out installation work, since the mass of the device is significant and is equivalent to 18.5 kilograms.
Some features of Volcano fan heaters
If you liked the Volcano water fan heater, then you should know about its main advantages. Among them, one can single out the absence of the need to use street air. These devices use the air that is available in the room. With shutters andspecial fan jets of warm air are distributed in 4 directions.
These devices are able to accurately maintain the temperature set by the user. This feature is provided by a thermal sensor that checks the room temperature every 60 seconds.
Preparation of materials before making a fan heater with your own hands
Water source fan heaters can be made by you if you don't want to buy the device in a store. To carry out the work, you will need a sheet of galvanized steel, a tube for a heat exchanger, two end valves, duct fans and 4 springs for fastening. Experts advise purchasing an additional Mayevsky faucet, which is useful for removing air congestion.
Required tools
Fan heaters with a water source of heat cannot be made without the appropriate tool, namely a jigsaw, drill, thread cutting die, as well as metal scissors, a ruler and a pencil. If you will be manufacturing the appliance by connecting to a central heating system, it is recommended to use a 0.5-inch coupling.
Assembling
In order to assemble a thermal water fan heater, you will first need to make a markup, and then cut a strip of metal with metal scissors or a grinder, which will allow you to get an impromptu frame. The bandwidth must be equal towidth of the device. The length of this blank is equivalent to four sides of the device. Fold lines should be marked on the strip, and then the process can begin. Opposite sides are connected with rivets or sides, for this you should form a side 2 centimeters wide. From the remnants of the material, a front panel should be made in which holes for air outlet are made. The element is fixed on the front side of the frame.
Work methodology
When making water fan heaters with your own hands, you will need to fill the copper tube with sand, close one end and bend the heat exchanger. After that, the element can be freed from sand and blown. A hole is made on the side of the body for the exit of the ends of the heat exchanger. It should be threaded for the coupling. From above, a Mayevsky crane should be installed. Now you can assemble the device: the finished case is equipped with a heat exchanger, on both sides its ends must be supplemented with nuts.
A fan should be mounted behind the heat exchanger; for this, holes are drilled in the corners of the case for installing springs. The fan should be in the center of the device. The device is installed on the wall in such a way that there is a gap of 10 centimeters or more between the surface and the heater. Taps should be connected to the central heating pipes, and connected to the fan through the coupling.
