Wood coatings and waxing is becoming more and more popular. This not only gives brightness and shine, but also protects the tree from various influences on it. Wood wax is usually used for processing. It repels water, prevents scratches, makes the surface "like new". In today's article, we will tell you how to impregnate and protect the tree yourself, make it look more attractive.
Introduction
Today there are a lot of means to protect wood from rotting, deformation or fungus damage. Wax impregnation is probably the very first place among the rest. How is wood waxing done? Everything is very simple. The term "waxing" is applied to the process. This is the oldest and, perhaps, the highest quality of all methods. Wax is the best tool for emphasizing the decorative functions of wood, its texture, as well as for making the surface velvety, protecting against the sun and chemicals. Varnish, paint, oil are also used for this, but they are not so effective.
Wax for woodcan be bought everywhere. But the finished product, which is produced at the factory, includes various additives, including oils.
Tools and preparation
You can use such products immediately, especially since they are available in various colors and shades. Waxing is suitable for any wood. So let's get started.
Needed:
- wax;
- carpentry knife;
- solvent;
- emery paper (for stripping);
- piece of natural fabric;
- brush;
- brush.
Wood after such treatment perfectly retains heat, does not let moisture through and has a long service life. A new untreated surface does not require preparation, but a tree with an old coating, on the contrary, needs it.
- Clean the surface of the old coating. In the case of lacquer or polish, this should be done with a thinner until completely removed.
- Wash off the residue with warm water. If there are still pieces of varnish left, cut them off with a knife and rub them with sandpaper.
- Brush over the entire surface again.
- Wait for it to dry completely.
- Re-sand it thoroughly with sandpaper to avoid bumps and loose fibers.
Technological process
Wood wax is a great and inexpensive alternative to enamel and lacquer. At the same time, it is ecological and clean.
For processing you need:
- Prepare a dry, smooth surface for application.
- Evenlyapply wax to it with a piece of lint-free clean cloth in the direction of the fibers.
- Very carefully process the entire flat surface, then corners, cracks and other elements, but with a brush.
- Leave the product for an hour to let the wax soak in.
- Remove all excess with a cloth.
Oil-wax for wood will make the material strong, moisture resistant and durable. If you want to add more shine, treat the entire surface with it again, but keep in mind that this time only a part will be absorbed. This is necessary in order to form a filmy layer, which you will polish with a stiff brush.
How to use and where to put wax products
Wood wax on surfaces will not run or roll unless exposed to high temperatures. From this, the coating can collapse and “float”. Therefore, such a coating is not suitable for the kitchen. It is also not recommended to place hot plates or objects on the products. The processed furniture is perfect for the nursery, bedroom, living room and other rooms in your home. We remind you that such interior items are environmentally friendly and do not harm he alth.
If you follow all the rules of operation, then your favorite things will serve you for a very long time.
We wish you and your family he alth and happiness surrounded by "new" furniture.
