If you are the owner of a country house or a private house within the city, then you are among those who try to make the atmosphere around you as comfortable as possible. It is impossible or rather difficult to achieve this goal if natural wood is not used, because concrete and ceramics are not able to convey such a pleasant tactile sensation that occurs when in contact with natural wood, and its natural beauty.
It is she who is often taken as the basis of the floor, which is covered with protective compounds for long-term operation. And here it is also important to take into account the fact that the material should not lose its ability to breathe, because this is so important to exclude the beginning of the development of moldy formations.
Need to use oil
While the beauty of this material is rather fragile, it is gaining more and more popularity, which is understandable, because in terms of performance and cost, this option is an ideal choice. However, any wood exploited in the openair, requires protection from fungus, moisture, ultraviolet radiation, decay and wind. Even if you use denser softwoods, they will require proper care, which will be able to extend the life of the products.
Problem Solving
The market today presents many ways to protect and process wood, which can improve the quality of the material. But among such solutions there are not so many options that allow you to preserve the valuable quality of wood and naturalness. Oils and varnishes used for indoor processing cannot be used outdoors, because they will not provide adequate protection. That is why it is best to choose a patio oil that can prevent warping and give a special shine that emphasizes the natural structure.
The main types of oils for the floor of the terrace
Some consumers are wondering why use oil when you can varnish wood. However, the latter processing option has a significant drawback, which is expressed in the airtightness of the formed layer. Over time, the surface of the paintwork wears away, exposing the wood.
But terrace oil does not create a strong film, does not interfere with air exchange and protects the material, deeply impregnating it from the inside. The construction market today offers a fairly wide range of oils, including:
- natural wax oils;
- oils with antibacterial additives;
- oils, which includecolorants;
- oil formulations with anti-slip effect.
Characteristics of Osmo Anti-Rutsch Terrace Oil
If you need patio oil, you can choose the above mentioned oil as a top coat. Based on vegetable oils, namely:
- soy;
- sunflower;
- linen;
- thistle honeycomb.
Ingredients are added with organic water-repellent additives, which have a high density and are evenly distributed in the mixture, preventing slipping after drying. This solution can be used after treating wood from rot, mold and blue.
Applying the oil is quite simple, it does not dry out during processing. The coating turns out to be silky-matte, does not spread during application, and after drying it does not peel off and does not exfoliate. This patio oil can be used without first sanding the surface. The composition is resistant to ultraviolet radiation, protects the material from temperature extremes and humidity and gives it water-repellent characteristics, prevents the occurrence of rot, blue and mold.
Features of use and consumption of Osmo Anti-Rutsch oil
For effective protection of previously painted wood, it is recommended to apply oil in two layers, as a topcoat, the composition is applied in one layer. If the air humidity does not exceed 50%, and the ambient temperature is approximately +23 °C, then the timedrying time will vary between 8 and 10 hours. Consumption will depend on the properties and structure of the wood, as well as on the preparation of the base. One liter will be enough to treat 24 m2 of the surface if the oil was applied in one layer.
Neomid terrace oil reviews
This oil impregnation is a high quality wood protection mixture, which is made on the basis of natural oils. Among the ingredients are fungicidal and processing aids, as well as polymerized oil. There is a UV filter in the mixture, which guarantees protection from solar radiation. The product can be used for the primary processing of wood, as well as for repairing a surface on which oil has already been applied.
This patio oil, which is recommended to read reviews before purchasing the product, according to customers, is resistant to household detergents and moisture. The service life of wood increases, the appearance of the material remains at its original level.
According to buyers, ease of application is a feature of the oil. After drying, the layer does not peel off and does not exfoliate. Users are advised to clean the surface before application, freeing it from wax and dirt, as well as previously applied paints and varnishes. If you plan to process hardwoods, then they should first be cleaned of resin and natural oils using a rag soaked in an organic solution. Consumers claim thatBefore applying the oil, the base must be well dried, because the moisture content in the wood should be no more than 18%.
Neomid oil characteristics
Neomid terrace oil increases the resistance of the material to ultraviolet radiation, prevents the occurrence of fungi, blue stain and mold, and makes the surface water-repellent. Application should be carried out with a brush, evenly distributing the composition along the wood fibers. The number of layers can be up to two, but sometimes it is required to completely impregnate the material. An hour after application, excess oil can be removed using a dry cloth. Work must be carried out if the thermometer drops below +10 ° С.
To touch the surface will dry after 6 hours, and the final drying should be expected in a day, if the environmental conditions are met. Thus, the temperature must be above +20 °C, the relative humidity of the air must be approximately 65% or lower. Terrace oil Neomid will be consumed in the amount of 1 liter for every 10 m2 of surface. Sometimes the consumption decreases, and this amount of oil is enough for 20 m2. After completing the work, the tools and container should be cleaned with white spirit.
Tikkurila VALTTI Specifications
"Tikkurila" - oil for terraces, which is a colorless composition applied to a wooden surface in two layers with a brush or sponge. In order to give the oil a shade, a colorant should be added to it. The mixture is able to improve the quality of the adhesion of old surfaces. Can be used on any type of wood. The soaking time is 40 minutes, the mixture will dry after 8 hours, and the working temperature of the application can vary from +20 to +22 ° C.
Pinotex oil
"Pinotex" - oil for terraces, which is also quite popular today. Application can be carried out not only with a brush and sponge, but also with an airbrush. The oil is durable, it does not form a crust on the surface after drying. Antibacterial components are added to the ingredients during the manufacturing process. The oil is well suited for soft woods that need deep impregnation. This oil can be decorated by adding a colorant. The soaking time is 40 minutes, you can wait for complete drying after 6 hours, but only if the ambient temperature shows from +22 to +23 ° С.
Features of using V33 oil
V33 terrace oil should be mixed before application and the wood should be prepared. The surface must be absolutely dry and clean. If you have to work with hard wood, then you need to sand it well, and then remove all dust. If it is necessary to treat old wood, then it must first be cleaned using V33.
When there is a need to impregnate previously untreated wood, the first layer is applied in such a way that the material can be abundantly impregnated. After 15 minutes on a damp surface, apply moreone layer of oil, waiting after another 15 minutes. If the wood does not absorb the oil after this, you can be sure that the protection is as effective as possible. Using a lint-free cloth, it is necessary to rid the surface of excess oil and leave to dry completely, which will take 24 hours. If the old coating is to be processed, then it is not necessary to apply the composition to the entire surface area. It will be enough to apply 2 coats on worn areas.
Features of applying Alpina
Alpina Terrace Oil has a silky glossy sheen and can be used both indoors and outdoors. Shades of wood can be tinted by computer technology. Before application, the surface must be freed from dirt, resin and dust, using an appropriate tool. The surface is degreased, the oil is applied exclusively to dry wood, which does not have an enamel and varnish coating.
The product must be mixed before use, a brush should be applied during work. It is necessary to achieve saturation of the surface. You should not start work if the thermometer has dropped below +8 ° C. "Alpina" - oil for terraces, which should be removed with a rag after 15 minutes, this applies to excess that has not been absorbed. On end sides and edges, the application should be particularly intensive, if necessary, apply 2 coats. The tool is cleaned with soap and water.
Conclusion
If you protect wooden surfaces with a specialoil, this will significantly extend the period of their use. It is important to choose the right composition, taking into account the place of application of the coating. The floor of the open veranda and garden furniture need special protection, because aggressive humidity, sun and wind constantly affect their surfaces. Therefore, it is recommended to choose mixtures that have a high wax content.
