For the design of the site, the presence of tracks is of great importance. They serve as an excellent decoration of the yard, with their help you can divide it into functional zones, and moving along clean and well-groomed paths is a pleasure.
Before laying paving slabs, you need to do some preparatory work. At the first stage, it is necessary to mark the places where the tracks will run. To do this, in the course of laying the tiles, wooden pegs are driven in, a cord is pulled between them to mark the boundaries of future tracks. Next, you need to remove the soil from the designated areas (15-20 cm), and this process directly depends on how you decide to lay paving slabs with your own hands. If these are garden paths, then the soil is removed so as to tilt them away from the house to create the necessary slope for water flow. Places for laying tiles must be leveled, then the paving process begins. How to lay paving slabs with your own hands depends on the purpose of the tracks and the loadwhich they will carry.
Pedestrian paths are usually laid on a sand cushion, the thickness of which should be from 10 to 15 cm. The sand laid in the prepared trench is leveled, then poured abundantly with water and rammed. Along the edges of the trench, curbs are installed on the cement mortar, the seams between which are filled with mortar. According to the drawing planned in advance, tiles are laid out, between which gaps of 2-3 mm are left. The surface is leveled with a rubber mallet and spilled with water to remove excess sand. If the load is assumed to be more solid, then the tile is laid on a crushed stone base with a dry sand-cement mixture. Crushed stone is covered with a layer of 15 cm, leveled and rammed. The curbs are installed on a liquid mortar, and a sand-cement mixture is poured on top of the rubble, the thickness of which must be at least 5 cm. The laid tiles are also leveled and spilled with water.
How to lay paving slabs with your own hands with a greater load? It is laid on a cement-sand screed on a concrete base. When laying concrete, it is necessary to remember about expansion joints. Borders are installed on a liquid mortar, which also closes the seams between the laid tiles.
There are many options for how to lay paving slabs with your own hands: wickerwork, herringbone, circle. It can also be done randomly. In addition, the laying pattern can be determined by your own imagination. In addition to the variety of forms,paving slabs are distinguished by an abundance of sizes and shades.
How to lay paving slabs with your own hands, determined, but you need to know that it requires care. It needs to be washed, cleaned, but at the same time it cannot be treated with chemicals and painted. Paving slabs have a number of advantages. First of all - environmental friendliness, as it does not contain harmful components. The surface of the tracks always remains dry, and when repairing the coating, individual tiles are easy to replace. These tiles can be reused many times, and, of course, they look more aesthetically pleasing than coatings such as asph alt or concrete.
