Probably, every owner of a private house dreams of becoming the owner of his own sauna or bath. But the work does not end with simple construction. Over time, dampness, mold, and blueness begin to appear on the wooden elements of this structure. Naturally, the owners have a completely logical question: how can these wooden structures be protected? In this situation, lacquer for baths and saunas can help. It is about him that will be discussed further.
Varnish for baths and saunas
This is a special product designed for wood treatment in rooms with high humidity. Such varnishes are specially designed to protect wooden walls and ceilings from moisture and high temperatures in the dressing room, washing room and directly in the steam room itself. In addition, they form a coating that repels dirt and water, which helps to prevent rotting of the wood. Also, the varnishes are fully consistentfire safety requirements.
Lacquer Properties
Bath and sauna are special rooms in which not just high temperature, but real heat. Therefore, lacquer for baths and saunas must have, according to consumers, certain properties:
- to be as resistant as possible to large temperature differences;
- meet all fire safety requirements;
- protect wood on walls and floors from mold, fungi and other pathogens;
- do not lose their appearance, original texture and color over time.
As a rule, lacquer for baths and saunas has a high-quality acrylic base in its composition, which makes it resistant to high temperatures and prevents this product from melting. Also, such varnishes always contain wax, which gives the composition water and dirt repellent properties.
When choosing a quality wood finish, be sure to remember that the varnish must be easy to clean, easy to apply to the surface and have high adhesion.
Varnishes for saunas and baths - a universal remedy
In addition to wooden surfaces, prevailing in baths and saunas, high-temperature varnishes can be used:
- for concrete;
- artificial stone;
- ceramics;
- brick;
- natural mineral bases.
When buying varnishes with refractory properties, you shouldremember that it is highly not recommended to open shelves, curtains and other places in contact with human skin, because:
- These wood pieces don't rot that much.
- Untreated wood for people is considered more hygienic and has certain healing and preventive properties.
Neomid - varnish for baths, saunas
"Neomid" is an acrylic-based composition designed for effective protection and decorative finishing of wooden elements in these rooms. Forms a translucent layer that protects against dirt and moisture, as well as various fungal deposits. This is a quick-drying, environmentally friendly, water-soluble acrylic varnish for baths, saunas, practically odorless, after drying it is able to retain a natural woody smell and emphasize the natural structure of wood.
Composed of acrylic dispersion, targeted and bioprotective additives, defoamer and water.
Basic Features
Neomid lacquer for baths and saunas, according to user reviews, has many positive properties, such as:
- formation of a durable protective dirt and water-repellent translucent layer with increased elasticity;
- protecting the wooden surface from the formation of fungi and mold, thanks to its special bioprotective additives;
- prevention of wood surface darkening;
- save and underlinenatural tree structure;
- quick drying on the surface;
- environmentally friendly product;
- virtually odorless;
- varnish for baths and saunas water-soluble;
- tinted.
Thanks to the listed advantages, this varnish for baths and saunas received the most positive reviews.
Used for varnishing the ceiling, walls and other wooden surfaces inside saunas and baths, except for floors and shelves.
How to prepare the surface?
Treated wood must be clean and dry, free of dirt, blue, resin, mold, grease. If there is a fungal infection on the surface, it must be removed by treating with Neomid 500 bleach, which will return the tree to its original natural color. Also, the surface can be treated with a deeply penetrating antiseptic for saunas and baths NEOMID 200, which can provide maximum bioprotection.
How to use
"Neomid" is a ready-made composition that does not require dilution. It must be mixed well before use. The varnish is applied evenly on a clean and dry wood surface with a brush, roller or spray gun in 2 or 3 layers. Work with the drug can be carried out at an air temperature of at least +5 °C. After staining, the tools must be rinsed immediately with water. After applying the first coat, it is recommended to sand and clean the surface of the resulting dust, which will improve its appearance.
The tack dry time is onehour (at an air temperature of +20 °C and a relative humidity of 65%). The second layer can be applied no earlier than 3 hours later. The surface is ready for operation in 3 days.
The average consumption of this product with a single-layer application is approximately one liter per 7-10 square meters. m (depending on the surface to be treated).
Storage conditions
Lacquer must not be frozen. Store in the original unopened container in a cool and dry place. The expiration date is indicated on the label. Use the tinted compound within one month.
The remaining varnish must not be poured into water bodies, sewers and on the ground. Completely dry packaging should be disposed of as household waste.
Precautions
The tool is fire and explosion proof. When working with it, gloves and goggles should be used. Avoid contact with open areas of the body and eyes. If swallowed, seek medical advice immediately. Keep out of the reach of children!
