If you decide to make a major overhaul in a house or apartment, then the question often arises of replacing old window structures. Yes, wooden windows are structures made of environmentally friendly material, but the paint will always need to be updated, because it peels off, and annual repairs will cost you a pretty penny, and this is extra trouble. To date, many apartment owners have already replaced their old windows with new ones, but there are those who are just about to do the same.
Why are plastic windows in demand?
These are low maintenance designs. Their service life is forty years or more. Before installing new window systems, it is worth learning in more detail how to properly install ebbs on plastic windows with your own hands. This is very important, especially if you want to do everything yourself.
The tools you need
Before you start installing the ebbs on plastic windows and installing the windows themselves, you will need to stock up on the right tools. Here is a rough list of what you will need for the job:
- grinder, level;
- perforator, ebb;
- plugs, tape measure;
- sealant, polyurethane foam;
- stationary knife, construction corner.
When you have stocked up with the necessary tools, then you can proceed to the installation of low tides on plastic windows.
Which material to choose ebbs?
In fact, you can use absolutely any ebbs, no matter if they are galvanized, aluminum or plastic. Products will serve you faithfully for a long time if you correctly install the ebbs on plastic windows and take care of them. Each of these materials has its own special characteristics. Therefore, to perform the installation of ebbs on plastic windows, you will need to have little knowledge and skills.
More about low tides
You have selected and completed the installation of newfangled windows, but this does not mean that the work is completed. Nobody canceled the installation of low tides on plastic windows, visors, slopes. If you do not know what it is and why it is needed, then it is time to resolve this issue. In everyday life, many people call ebbs window sills, but this is a bit illogical. Why is it necessary to install a low tide on a plastic balcony window? If this is not done, then water from the outside of the window unit will linger in the gaps, and the operation of the frame will not last long. Window systems are an expensive pleasure, and few people go to change windows because of the banal savings on low tides. In addition, if you have a plastic window, then by installing the ebb onplastic window with a swivel pipe, you will give it a complete look, and it will fit into the overall architectural solution.
Would you like to protect your window from the weather? Then one ebb will not be enough! You will need to worry about mounting the visor at the top of the window.
What about the visor?
Now there is a large selection of materials for creating canopies and ebbs. This is both PVC and a galvanized sheet with a plastisol or polyester coating. To determine what materials you need, it is better to install a plastic window block, and then purchase the necessary components to match the color and material of the window itself. It is important to make sure that the window structure harmoniously fits into the architectural ensemble of the building, and then do the installation of ebbs on plastic windows with your own hands.
Techniques for finishing ebbs
It is important to correctly install the ebbs on plastic windows with your own hands around the entire window opening. If you had a wooden window, but changed it to a plastic one, then you most likely noticed that the wooden structures are thicker, so you will need to carry out finishing work on the ebbs to make the appearance of the house pleasing to the eye.
There are several techniques for finishing ebbs:
- Plaster finish. This is the most common and budget option, which has been used for a long time. This type of finish is suitable if you have a brick, panel or concrete block house.
- The most reliable and neat type of finish is installationlow tide. It does not matter at all, you need to install the tide on a plastic window in a wooden house or any other, the method is extremely simple and effective. The most important thing is that the installation does not take much time. Plastic structures add insulation in the window unit, are not exposed to active influence from the outside, just wash.
Therefore, it will be very easy to independently install the ebb on a plastic window in accordance with GOST. Put a little effort, patience and stock up on the right tools.
Window sill and low tide
If you don’t know how to get started right, you can see how the installation of the ebb on a plastic window in a wooden house in the photo is performed, read the information, and then follow the instructions step by step so as not to make a mistake. In most cases, along with a plastic window block, a new window sill and low tide are installed at the same time. It should be said that even if there is a high-quality old ebb, it will need to be restored, and at a cost it will not be inferior to installing a new one, as you can see, there is no point in saving, because it is easiest to purchase a new product right away.
The window sill cut out for your window opening will need to be attached to the stand profile. If there is a small opening under the window sill, it will be necessary to foam it, but if the opening is large, you need masonry or its sealing with a special solution. Once you decide on the size of the window sill, then feel free to add a couple of centimeters to the desired width, that is, about twocentimeter window sill goes under the frame. If the window overlooks the balcony, then you can not install the ebb, mount the eaves right away.
Install window systems
When the window is being installed, the wooden wedges will need to be placed next to the dowels, or in another way with the fixing points of the PVC window in the wall opening. So you can fix the entire structure and protect it from bending while pulling it to the wall. All bars without any knots should be placed with fibers perpendicular to the window block itself. With the correct measurement of the opening under the window block, the height of the chopiks will be at least twenty millimeters. Such values are required for the arrangement of the lower heat-insulating seam and the installation of a low tide on a plastic window in a wooden house.
Next, we fix the PVC window to the wall with anchor dowels or construction screws. If you choose fasteners and their dimensions, you can be guided by GOST 30971-2002. Now we hang the opening sashes and adjust them in height, tightness. The tightness of the fit depends on the season of the year and your preference.
We fasten double-glazed windows thanks to glazing beads, pre-installing the lining under the double-glazed windows. The glazing beads will need to be hammered in with a wooden hammer, do this very carefully so as not to damage the double-glazed window.
To equip the heat and sound insulation layer, you will need to use foam insulation. Fill the gaps with insulation should be after the assembly of the window block, after it is fixed. When fillinggaps, keep an eye on the completeness and degree of filling so that nothing is warped under pressure.
Before filling, test the initial expansion of the foam product and be careful not to let excess foam come out. From the inside, you can cut off the excess foam.
More details about the installation of ebbs on plastic windows in a house made of timber
Window sills perform a protective, decorative function. In order for them to perform their task efficiently, you will need to install them in a timely manner. It is best to do this on the day when the window block is being installed or the glazing of the loggia or balcony is being made. If you install the tide on a plastic window in a frame house at another time, this may bring you additional expenses and you will need to wait with the installation.
The installation process is simple, but requires a person to follow certain rules and techniques. The ends of the tides will need to be inserted into the wall, and the edges must be bent in a shape resembling the letter "C". The ebb is installed on a special "cushion" from the solution. In certain situations, all joints and touch points of the tide and the walls are smeared with mastic. It is a good material that increases waterproofing and strengthens the bond.
Attention! Installation work is best done on a nice, fine day, because all work is done outdoors. If you absolutely do not understand how to carry out the installation of ebbs, then entrust this work to specialists, since withinstalling them yourself there is a small risk of choosing the wrong angle, but you can correct a small error.
During the installation of ebbs, special attention must be paid to the waterproofing material. If you choose it incorrectly, then the ebb will have poor tightness (this will lead to problems in the future).
When you need to attach the ebb to the PVC profile, then you should use a special groove for this purpose, which all manufacturers leave for installation work. If the tides are installed below the level of the plastic window frame, then additional support profiles will need to be used to increase the waterproofing.
The joints of the sills and the window frame must be completely sealed, otherwise the sill will not be able to fully perform its functions, which means that the facade and the window unit will not be protected from water penetration.
Mounting Features
In order to guarantee the removal of liquid from window blocks from the outside, it will be necessary to install window sills. As a result, you will prevent rain from entering the frame space.
Features for the installation of ebbs:
- Ebbs can be made from different materials. The most commonly used galvanized steel. However, you can not engage in independent production of ebbs, but simply go and buy ready-made ones and install them. It is best to install ebbs immediately after installing window blocks to preserve the life of the structure. During installation work, it is best not to block the drainage systems, which are located on the outsideframes. It is better to install a low tide under the window, and not right next to it.
- When installing sills on plastic windows on siding or any other material, be sure to take care of sealing all connections with the window frame. To do this, you can use polyurethane or compression bands, silicone sealant. If there is an installation of balcony ebbs, then everything is not as simple as it seems. If the tide turns out to be wider or longer than the dimensions of the balcony, then the water will necessarily fall on the glazing.
How is the installation?
Before installing the ebbs, you will need to make sure the quality of the material, evaluate its color. Do not forget that during installation, the angle of inclination of the ebb plays an important role, it should be from one hundred and ten degrees. If it is smaller, then the water will stagnate, also look at the ebb plane. On the plane there should be no deflections, propeller effects. Installation of the ebb should begin with an assessment of the difference in the plane of the base. It should not have impressive protrusions, recesses. Ideally, the base should be level with the bottom window stand. It differs in that it is presented in the form of a recess. If there is plaster or other mortar on it, then before installing the ebb, you will need to clean the stand. If the notch is too large, then you will need to make a lining of plastic wedges or wooden bars.
Do not forget that there should be no gaps between the sides of the tide and the plane of the window frame.
On the sides of the ebbyou will need to attach caps to protect against rust and facilitate installation work. Instead, you can still bend the edges at an angle of ninety degrees. Next, the ebb is installed in the right place, pressed against the recess and then fixed with self-tapping screws. It is best to use galvanized self-tapping screws with a large head, which are also called press washers in another way. Rivets still look neat, but they are not so easy to work with. The distance between the fasteners should be twenty centimeters, so take all measurements and level everything.
Next, you need to raise the edge of the tide so that the tube from the foam bottle can easily go under it. Perform foaming of the entire plane. If there are coasters under the tide, then foam everything carefully so as not to dislodge them.
Attention! The foam will expand and increase in volume, so keep an eye on it. In addition, you will need to put a press at low tide (eggplants with water, foam blocks, bricks are suitable). So that they do not scratch the coating of the tides, make a lining of timber, oilcloth, linoleum or other material. Weight should be evenly distributed.
The foam will set in a day, then take care of sealing the ebb and slopes. Excess foam will need to be removed with a clerical knife, also remove the remnants of protruding silicone. We believe that you will not have problems with the installation, because this task is not the most difficult. The main thing is to do the work measuredly, be patient and not rush. Do not save on materials and follow all our advice. If you do everything yourselfif you can’t, it’s not a problem, just contact the specialists for help, they will do everything quickly and competently.
