If you are interested in the question of what a thermostat is, how to install this device, you also need to know before purchasing.
Purpose of the device
Temperature control equipment is designed to influence the indoor microclimate, while the owners of residential apartments or houses can set the most suitable range of night and day air temperatures. In addition to maintaining the temperature balance in residential premises, using a thermostat designed for heating, you can optimize the cost of paying for housing and communal services.
Many owners of apartment buildings in the winter are forced to keep the windows open, escaping from radiators breathing heat. In this situation, you can put up with the situation if the payments for heating are made according to the standards. If counters are installed in the house or apartmentheat, then it is not at all beneficial for the owners to endure the described inconveniences, while heating the street. That is why many consumers today purchase a thermostat. How to install it, it is important to know even before the purchase.
In which room should the thermostat be installed
More than the rest, the installation of these devices requires rooms in which the temperature changes significantly during the day. In this case, we are talking about the kitchen, as well as rooms that are oriented to the sunny side. It is important to adjust the temperature level in the bedrooms, as a full sleep can only be ensured at a temperature of 18-19 degrees.
Advantages of thermostats
If you are thinking about how to properly install the thermostat on the boiler, then the same technology as described in the article can be used for this. In addition to the fact that the installation work will be done by yourself, you can enjoy the additional benefits of this equipment. Among them, we can distinguish a modern and ergonomic design of the device that will fit into any interior. This unit is as easy to operate and as convenient as possible. If the temperature inside the building rises due to the operation of electrical appliances or exposure to sunlight, the sensor will detect these changes, reducing the heating level of the system.
Places for installing a thermostat
If you decideto purchase a thermostat, how to install this equipment, it is important to study even before visiting the store. The most suitable place to place this element is a heater, or rather, a battery. This condition is true only if the radiator is not covered with curtains, interior items or grilles to decorate the space. If this rule is violated, this may cause an inadequate assessment of the temperature level in the room. This rule can be circumvented by using a thermostatic element equipped with a remote sensor. The latter is located under the valve at 2-8 meters. In this case, the temperature level will be controlled at the location of the sensor.
If you decide to use a thermostat, you can learn from this article how to install this element. In addition to the above conditions, the temperature controller for radiators can be installed on a horizontal pipeline zone, at some distance from the entry point into the heater. If the installation of the element was carried out in accordance with the recommendations and all the rules and building codes were observed in the process, then the temperature can be adjusted in the range from 5 to 30 degrees. The step in this case will be one degree. Some models allow you to change the temperature range within other limits, so it is recommended to check this information before purchasing.
Installation technology
If you are wondering how to properly installthermostat, it is important to familiarize yourself with the installation procedure. To carry out such work, you must first turn off the supply riser. After all the water is drained from the heating system, only then the master can proceed with the installation work. They must be done in the following order. At the first stage, horizontal pipe connections are cut off at some distance from the batteries. The pipeline is disconnected, which turned out to be cut off, as well as the crane, if one was installed earlier. You will need to disconnect the shanks with nuts from the thermostatic valve and stopcock. They will need to be wrapped in the plugs of heating radiators. The next step is to assemble the piping and install the elements at the selected location. After that, the piping is connected to the horizontal supply pipes that come from the riser system.
Work methodology
If you have set yourself the task of installing a thermostat on a boiler, you should know that heating systems can be divided into two-pipe and one-pipe. In the latter version, when connecting the thermostat, it is necessary to change the battery connection scheme by installing a jumper. The latter connects the reverse and direct connections of the device. This jumper pipe is called a bypass, it allows the coolant to run when the radiator is blocked by a thermostatic device. When implementing such a connection scheme, it is quite convenient to remove the device by closing the valves in advance. If you don't know how to installthermostat to the battery, you should be aware that in a two-pipe system, regulation occurs by the method of coolant entering the battery, which is carried out by means of a temperature controller that is installed on the top supply line.
Carrying out thermostat settings
After you have decided where to install the thermostat, as well as done all the installation work, you need to think about the correct setting of the element. This minimizes heat loss from the room. This can be done by tightly locking all doors and windows. The thermometer should be located in a place where a constant temperature is maintained. After that, you will need to fully open the valve by turning the head of the device all the way to the left. In this position, the battery will provide the highest level of heat transfer, after which the air in the room will begin to heat up. As soon as the thermometer reading increases by six degrees compared to the initial level, the valve can be closed. To do this, the head turns to the right until it stops. The air temperature after these manipulations will begin to slowly decrease. As soon as it reaches the required value, you can slowly begin to open the valve. After you hear the sound of water in the device and feel the heating of the valve body, the rotation can be stopped by remembering the last position.
On this, we can assume that the valve setting has been completed. If you still do not know how to install a thermostat on a radiator,it is best to take the help of specialists. Only they will help to carry out these works as correctly and safely as possible.
Additional recommendations for installation work
Experts give advice on how to properly install the thermostat on the battery. Visiting the store, do not give preference to the cheapest models. It is recommended to install shutoff valves in front of the described element - only it will allow you to quickly shut off the coolant. The unit must be installed perpendicular to the battery. The device is mounted on the supply pipe using a technology that involves the location of the thermal head parallel to the floor surface. Thus, this part should be horizontal. To carry out these manipulations, you will only need an adjustable pipe wrench and the available instructions.
Conclusion
Professionals are perfectly familiar with the requirements that are imposed by the manufacturers of the described device. If you install and configure the thermostat correctly, you will be able to enjoy a comfortable level of indoor temperature all the time, this will certainly save heat consumption, which will positively affect the family budget. That is why modern consumers increasingly began to purchase and install the described equipment in their apartments, because it implies only a positive effect from use. NoneThere are no negative features of this equipment. And the cost will pay off in a few months after you start using the thermostat, which you can easily install yourself.
