Construction mixtures are used in repairs for various purposes. To obtain the smoothest surface, a finishing putty is used. A huge selection of such mixtures is on sale. Before going to the store, you need to consider which finishing putty is better. Expert advice will be discussed further.
Destination
So, choose the best composition of the finishing putty. To do this, you need to determine what, in general, this material is needed. Finishing is the finished surface of the wall, on which the appropriate decorative layer will be applied. This material may have a different composition. However, they share a common area of application
Putty is a powder type material. It can be white or have a certain shade. As a rule, the finishing varieties of putties are perfectly white. This is due to the scope of the composition. Paint is applied to the layer created using this material or wallpaper is glued. You can apply other types of finishes.
A feature of finishing putties is the size of their fraction. The composition includes small components that allow you to create a very even layer. In the starting putty, the fraction size is larger. Therefore, it can be applied to the surface in a sufficiently thick layer. Finishing putty is applied to a previously prepared surface. Its layer cannot exceed 1 cm.
Putting Requirements
Which finishing putty is better to putty the walls? To answer this question, you need to consider the basic properties of the material. A good putty should have high adhesion. This means that the material will adhere firmly to the surface.
Also, the composition must be environmentally friendly. Putty is used indoors. Therefore, it should not emit harmful substances into the air. Also, the composition must be wear-resistant. It should not collapse due to mechanical influences. The layer of finishing putty should not be adversely affected by temperature changes and high humidity. This indicator is especially important for materials that are used for outdoor work, as well as in the bathroom and kitchen.
Another important quality of the finishing putty is its convergence. The material must form a flat surface quickly and easily. In other words, an even layer is obtained even without additional mechanical action. After hardening, the material should lend itself well to grinding. These are the main qualities that finishing putties should have. When buying, you should pay attention to this.
Base Type
There are different types of finishing putty compositions, the manufacturing technologies of which can differ significantly. So, there are three types of putties. They can have a cement, gypsum or polymer base. The scope of their application depends on the type of composition.
So, cement compositions are suitable for rooms with high humidity. It can be a bathroom, kitchen, shower room, etc. The material will not collapse under the influence of moisture. He doesn't absorb it well.
Gypsum putties in residential areas are the preferred option. Gypsum is able to absorb moisture. Therefore, for rooms it is ideal. The putty will absorb excess moisture. When the air in the room becomes drier, the material will give moisture back to the environment. At the same time, gypsum allows you to create a favorable microclimate in the room. But it is not suitable for wet rooms.
Polymer putties are suitable for preparing the ceiling for decorative finishing. These are the compositions with the smallest fraction. They form a perfectly flat surface.
Dry composition
When choosing which is the best finishing putty for wallpaper, you should pay attention to dry mixes. They are sold in bags. Before use, water is added to the composition in a certain amount (indicated on the package). All types of putties are produced in this form.
The advantage of dry mixes is ease of transportation and storage. Mastercan prepare the composition of the desired consistency independently. At the same time, the shelf life of the dry mixture will be long. This is a universal type of putty. They are used for different types of finishes. With this composition, even the most delicate finish can be made.
Among the disadvantages of dry mixes, it should be noted the need to spend time preparing the composition. At the same time, in finished form, it is stored for a relatively short time. At the same time, during kneading, it is necessary to strictly follow the manufacturer's requirements regarding proportions.
Ready lineups
Considering which finishing putty is better for painting, you should pay attention to the finished compositions. They are sold in buckets of a certain capacity. The composition is completely ready for use, it is not necessary to knead it before applying to the surface. In this form, polymer putty is most often made.
The main advantage of the composition is the absence of the need to cook it. This does not require additional time. Also, these materials are characterized by high rates of convergence. In a hermetically sealed container, the composition is stored for a long time.
The disadvantage is the high cost. Dry mixes are cheaper, so for finishing a sufficiently large base area, it is more profitable to purchase them. At the same time, ready-made compositions are not used for delicate work. The minimum layer thickness is 5 mm. Also, ready-made putties cannot be stored at low temperatures. The container must be hermetically sealed.
Expert reviews
Before going to the store, you should also consider the recommendations of experts, their reviews, which is the best finishing putty for wallpaper, painting, etc. To get the highest possible result, you need to choose the right building materials. Gypsum putty, for example, according to reviews of professional builders, is best suited for wallpaper (both thin and thick).
Polymer putty is sold most often in buckets. This material is ideal for painting. Thanks to this material, a perfectly smooth surface is obtained. It is well suited for subsequent paint applications.
Cement mixtures are suitable for simple finishing. Most often, this material is purchased to prepare the walls in the entrance or to paint the floor. The fact is that after hardening, sanding cement putty is almost impossible.
Manufacturer Reviews
Considering the reviews, which is the best finishing putty, several popular manufacturers should be noted. Experts do not recommend saving on the quality of building materials. So, for example, there are many brands on the market for finishing putties. Some of them are little known. But their cost is relatively low.
However, when purchasing cheap material, you need to be prepared that the product will not be of the highest quality. It will be inferior in many respects to products of well-known manufacturers. For example, mixtures of little-known brands will shrink much more, and after dilution, it will quickly harden. Experts say that when using cheap compounds, it can be observed in some cases that the surface cracks.
The most popular manufacturers of finishing putty in our country are Ceresit, Knauf, Sadolin, Polimin, Tikkurila, Caparol, Kreisel, etc. These compounds are somewhat more expensive. However, they fully justify their cost. They form a strong, smooth surface. With the correct application of these putties, you can get a good result. The surface will be completely ready for painting or wallpapering.
Ceresit products
The company "Ceresit" produces a huge number of different dry mixes. They are designed for different types of construction work. So, for example, Ceresit CT 225 finishing putty is used for finishing facades. It has a gray tint, so it is not suitable for interior work. The cost of the presented product is approximately 650-700 rubles. for 25 kg.
To qualitatively finish the room for painting or wallpapering, it is better to purchase Ceresit CT 127. Its cost is 550-600 rubles. Sold in a package of 25 kg. This material is easy to apply to the surface, has an environmentally friendly composition. The color of the dry mixture and composition after mixing with water is white. Ideal for wallpapering.
The disadvantage of finishing putty CT 127 is the inability to level deep cracks. For this, a finishing putty is required. Also, this composition cannot beuse in bathroom or kitchen.
Knauf products
When considering which finishing putty to choose for painting, you should pay attention to the products of the Knauf company. In its manufacture, the manufacturer uses innovative technologies. Thanks to this, its compositions always meet the requirements of customers. On sale there are many options for putties, including for finishing. They can be crafted in different bases.
The most popular putties are "HP Finish" and "Multi-Finish". They are made on a gypsum basis, so they are suitable for finishing the room. "HP Finish" costs about 300 rubles. per bag 25 kg. This composition has a pinkish tint. It is often used for pasting a room with vinyl or non-woven wallpaper.
Multi-finish putty is more expensive. It can be purchased at a price of 350 rubles. for 20 kg. It creates a very durable, perfectly flat snow-white surface. This composition is quite suitable for painting, pasting walls with wallpaper, etc. The material is easily applied to walls, regulates the microclimate in the room.
Sheetrock Products
One of the high quality ready-made fillers is Sheetrock APJC. It creates the highest quality surface. However, its cost is quite high. Therefore, it is used in the decoration of small rooms. You can buy putty in a container of 28 kg. The cost in this case will be from 1400 rubles.
Among the advantages of the presented composition is ease of use. The composition is completely ready for use. Heeasy to apply on walls. This results in a perfectly smooth surface. She is white. In this case, the layer created with Sheetrock APJC will be durable.
It is worth noting that builders also note that among the advantages of the presented composition they call durable packaging. It is easy to transport the composition in it. The bucket withstands mechanical loads. At the same time, it can be used in the course of other construction works. The disadvantage of this finished putty is its high cost.
WeberVetonit putty
Considering which finishing putty is best for walls and ceilings, you need to pay attention to polymer compositions. One of the best materials in the group is WeberVetonit JS. It is pleasant to work with this composition, it is easily applied to the surface. At the same time, putty even allows you to seal the joints between sheets of drywall.
The presented material is suitable for creating a continuous layer. After that, it will be possible to stick wallpaper or paint on the surface. The cost of WeberVetonit JS is about 650-700 rubles. for 20 kg.
The color of the coating is perfect white. It does not turn yellow with age. When dried, the composition does not leave cracks. It is easy to apply on the prepared surface. The disadvantage is the limited scope. The composition is only suitable for dry rooms.
Sniezka Acryl-Putz Start 2 in 1
Considering which is the best finishing putty, you should pay attention to such a composition as Sniezka Acryl-Putz Start "2 in 1". This is a universal compound. It can be used both to align significant,and small irregularities. Also, with the help of this composition, the joints between the sheets of drywall are sealed. You can apply the presented composition both on the walls and on the ceiling.
The cost of dry mix is from 400 rubles. for 20 kg. Its advantage is easy application, as well as the possibility of fast and high-quality grinding after hardening. Putty hardens quickly, so you need to work with it quickly. The surface becomes perfectly flat.
Among the shortcomings, buyers mention the impossibility of painting the surface created with Sniezka Acryl-Putz Start "2 in 1". The layer of paint does not adhere well to the layer of finishing putty. Because of this, the decorative material peels off quickly.
A few more recommendations
Considering recommendations and reviews on which finishing putty is better, it is worth considering that dry compositions are more intended for further wallpapering. However, this does not mean at all that paint cannot be applied to them. The final layer will be sufficiently even and white so that the paint layer lies evenly and its color is not distorted.
When buying a ready-made mixture, you should ask the seller to open the lid of the container. If the fraction is large, it is better not to buy this composition. It is of poor quality.
Having considered which finishing putty is better, you can purchase the best type of building materials.
