Compressor equipment is used in enterprises, workshops and private households to supply equipment with compressed air. Screw structures can be considered a universal solution (in terms of performance and ergonomics in operation). ABAC stands out among the largest manufacturers of such units. An overview of screw compressors of this brand will allow you to choose the best solution for a variety of purposes.
SPINN 2.2 model 10-200
One of the youngest versions of the screw compressor in the ABAC line, available on the market for 210 thousand rubles. The unit has a power of 2200 W, an air mixture capacity of up to 200 liters, and provides a performance of 240 l / h. Despite belonging to the initial segment, the equipment can be used for industrial purposes by connecting it to three-phase380 V networks. In particular, the ABAC screw compressor of this modification can be combined with serviced units while maintaining a pressure of 10 bar. In terms of structural arrangement, the model is suitable for a small production site, as it is distinguished by its modest size and low weight - of course, in comparison with other representatives of the screw compressor class. Also, despite the small class, the device received technologically advanced control and management tools, including an ergonomic panel with readings and a pressure gauge.
MICRON E 2.2 model
Specialized compressor designed to work with pneumatic tools in car services and small industries. The model is distinguished by simple control, which is expressed in easy access to the main technical units and in the presence of devices for physical handling of the structure in different operating conditions. In particular, the design is provided with fixing equipment for fixing the equipment to the surface and a convenient condensate drain system. The performance characteristics of the ABAC screw compressor in this version are expressed with a power of 2200 W, a maintained pressure of 10 bar and a flow rate of up to 220 l/min. The MICRON E 2.2 package includes a thermostat, fittings for connecting pneumatic devices and an air dryer.
GENESIS Model 7.508-270
Representative of the middle level in the considered line of ABAC compressors. The GENESIS family is alsois considered the most popular in the company's range, as it is suitable for a wide range of applications. This compressor is equipped with a 7500 W electric motor and a 270 l receiver, which allows you to maintain a performance of 1150 l / min. The operating pressure is up to 8 bar. The features of the ABAC screw compressor include the presence of noise-absorbing insulation, which increases the comfort when operating the unit in a room with working personnel. Also, the developers have provided a modern control unit with a microprocessor system MS2. This software expands the possibilities when combining several compressors into one three-phase network. For protection, the manufacturer has equipped the design with a dryer that automatically removes excess moisture from compressed air streams.
Formula 3808
Optimal solution for large productions where a stable supply of compressed air is required in continuous operation for several shifts. This model is provided with a powerful 37,000 W motor, which gives it the ability to maintain a flow rate of 600 l / min. However, such a high potential would not have been possible without the large dimensions of the structure. When planning the purchase of an ABAC Formula 3808 screw compressor, one should consider the possibility of constructing a reliable foundation platform for a mass of 826 kg and dimensions of 1300 x 1000 in length and width, respectively. Among the controls, noteworthy is the text display, the already mentioned MC2 block, automation for monitoring connected systems and the possibility of programmingscheduled maintenance.
Formula 7510 model
High-capacity compressor, part of the ABAC premium model segment. Suffice it to say that the cost of this development is about 1.2 million rubles. For this amount, the owner receives a 75,000 W power plant capable of maintaining a capacity of up to 11,000 l / min at a pressure of 10 bar. Although the weight is also an impressive 1260 kg, the designers tried to optimize the dimensions of the model as much as possible. As a result, the ABAC screw compressor of the Formula 7510 modification has received a compact design that also facilitates installation and maintenance operations. When designing this unit, the creators paid special attention to protective devices, providing a metal casing for isolation from dust and moisture. In addition, it is allowed to include the structure in a single complex of several units with similar power characteristics.
Features of ABAC compressors
The manufacturer improves both the technical and structural characteristics of the equipment and its functionality. Among the most progressive technological features of ABAC screw compressors are the following:
- Air mixture preparation systems. For this purpose, filtration and dehumidification means are provided to regulate the main physical parameters of the air, excluding mechanical particles and oil impurities.
- Microprocessor control. ModuleMC2 allows you to control all the working units of the unit, as well as enable energy saving mode.
- Protection functions. The design is provided with the necessary insulation, vibration and sound absorption systems. Electrical engineering is supplied with overheating and overvoltage protection units.
- Self-diagnosis system. Models of the highest category within the framework of automatic control can check the status of the main systems and components, notifying of detected malfunctions through indication.
Spare parts for ABAC screw compressors
Because high-pressure operation with compressed air is subject to high loads, you should be prepared for unscheduled maintenance with the replacement of worn or damaged parts. The manufacturer himself recommends that you always keep the following parts on hand:
- Air filter.
- Filter panel.
- Oil filter.
- Cleaning tool.
- Belt.
The following spare parts for ABAC screw compressors may be required when repairing safety systems:
- The door and panels of the electrical panel, which is opened with a special key.
- Cooling fan.
- Filler cap (for oil).
- Valves.
- Seals.
- Mounting hardware for connecting to tools and equipment.
User reviews of ABAC products
Mostlythe equipment is used in enterprises, which indicates high requirements for its performance. And, as the reviews of the direct owners show, this product does not fail during operation. The indisputable advantages of most compressors of this company include the high quality of the element base, which confirms a long working life. Even small consumable accessories serve for several years, demonstrating enviable wear resistance. The power base also does not cause any complaints - the declared watts are maintained stably, giving out a sufficient power reserve. Negative feedback about ABAC screw compressors mainly refers to strong vibrations and noise. But this, firstly, applies only to individual models, and secondly, experienced users can easily solve such problems with soft pads that have the effect of depreciation during equipment operation.
Conclusion
The variety of technical and operational indicators in ABAC compressors allows you to easily select the right model for the needs of any production. The company also does not forget about the indirect properties of technology, taking into account the small ergonomic and functional nuances of its use. However, much in the process of operation will depend on the quality of service. In particular, special attention must be paid to the choice of oil for ABAC screw compressors, which will ultimately determine the efficiency of the working torque, and the composition of the air mixtures. It is recommended to use technical fluids of the same brand - for example, DICREA 46 oilspecially designed for units of this type, which are operated at high temperatures. Do not forget about the regular inspection of functional organs and checking mechanical connections. Operation with commercial three-phase mains voltage should only be carried out if the electrical infrastructure of the compressor is in proper condition.
