Over time, the silicone case on your smartphone may stretch. It does not fit snugly on the phone, which looks ugly. To avoid buying a new case soon, you need to consider simple techniques. They can be used at home. How to shrink a silicone phone case will be discussed later.
Features of the procedure
Can I shrink a silicone phone case at home? Buyers of low-quality products face this issue. A good smartphone case will not stretch even after several years of active use. When purchasing cheap products, you should expect a change in the dimensions of the protective bumper.
When wondering how to shrink a silicone phone case, it is worth noting that they all react to heat treatment in different ways. It is not always possible to reduce the bumper at home. But, nevertheless, it's worth trying. The result depends on what material the cover is made of. They are made from silicone with different component composition. Today, many variations of materials are used.
Successfully managed to reduce the case made of TPU (thermoplastic polyurethane). The vast majority of bumpers are made from it. During heat treatment, the material shrinks. But it's hard to predict how the cover will behave during heat treatment from a different silicone-based compound.
Why is the cover loose?
How to shrink silicone phone case? To avoid such a question at all, you need to purchase high-quality products. If the bumper is very cheap, it is most likely a low-quality fake. If the most inexpensive materials were used in the manufacture of the cover, it will stretch over time. It doesn't even depend on how many times you have removed the bumper from your smartphone.
The cover can stretch for various reasons. Poor-quality compositions react to temperature changes. If the bumper gets very hot in summer, it will increase in size. Moreover, it can be difficult to return to the previous dimensions.
Some phone owners initially purchase a case that does not fit tightly to their gadget. This situation is not uncommon if a smartphone is ordered together with a bumper in China. When choosing an accessory in a store, you need to try it on your phone. If there are any comments on the fit of the cover, it is better not to buy such a product. It must be remembered thatbranded accessories are much better.
Preparatory actions
Considering how to reduce the size of a silicone phone case, you can use a simple technique. It involves heat treatment of the bumper. If it is impossible to return the accessory to the store, you should try to reduce its dimensions with ordinary boiling water.
Different techniques are used to narrow the cover. Some buyers advise using alcohol or acetone, a freezer or a hair dryer. One of the most adequate is the method in which boiling water is used.
You will need two pans. They should be larger than the case itself. The first container should contain hot water, and the second - cold. It is necessary to ensure that there are no foreign impurities in the water so that the cover does not change color. It is also worth considering that such a procedure is best done in the presence of an opaque cover. Otherwise, it will become matte.
It is better to add a lot of ice to the container with cold water. It is necessary to create maximum temperature contrast during the processing of the cover.
Carrying out the procedure
When wondering how to shrink a silicone phone case, you need to pay attention to the heat treatment procedure of the case. Having prepared two containers, the water in one of them must be boiled. A cover is placed in it and boiled for 5-7 minutes. You need to hold the accessory with a spoon so that it does not float to the surface. Otherwise, processing will be uneven.
The thicker the material from which the cover is made, the longer it needs to be cooked in the pan. When the material warms up qualitatively, it must be removed from the container. Deformations may be visible at the edges. They need to be manually aligned. To do this, you can use white paper folded in several layers. When the edges are aligned, the cover is lowered into ice water. It should be in this container for several minutes.
Then you need to get the accessory, wipe it thoroughly with a soft cloth. You can try it on by wearing it on your phone.
Result
After considering the procedure for how to shrink a silicone phone case, there are a few things to consider. You can reduce the accessory by the considered method by only a few millimeters. If it is significantly larger than a smartphone, it will not work to reduce it at home. In this case, it's easier to buy a new bumper.
You should be prepared for the fact that the material can change shade, become matte. There may also be deformations that will need to be leveled manually while the cover is still warm.
