Knowledge is power, and sometimes "enlightenment" allows us (people) to easily overcome life's small and big difficulties. The topic of this article touches upon a purely everyday question: how to install a two-gang switch yourself? So let's get started.
Light rule
You will probably agree with the following sentence. Impeccably observed safety precautions allow a person to save life and he alth. Before you "mess" with wires and electrical appliances, you need to understand the following. The utmost attention is a fundamental success factor in such an enterprise. And the two-gang plug-in switch in this case is far from an exception. In no case do not neglect security measures, as sometimes absolute certainty can turn into an irreparable mistake. Therefore, before carrying out work with electricity, once again make sure that the house, apartment or other premises are de-energized at the time of work. And only after checking with an indicator or multimeter shows the absence of voltage in the electrical circuit of the object of work,feel free to start implementing the connection.
Which two-gang switch to choose
Today, on the market of electrical goods, you can find quite a lot of various devices that allow you to control the lighting of rooms. The most common are ordinary switches, which can have various connection contacts: plug-in or screw type. It will be easier for you to navigate during the installation process if the two-gang switch is marked indicating the correct connection to the network. It should be noted that the main part of the device that connects and interrupts the action of the current should reflect the quality of the product. Backlash and gaps between the keys, the difficult movement of the mechanism are unacceptable moments in operation. Be careful in the selection process.
Step by step instructions for the connection process
- De-energize the power supply of the house (apartment).
- Dismantling the old light switch.
- Split the ends of the disconnected wires.
- Turn on the electricity and check with the indicator which of the output wires is phase (the LED lights up).
- De-energize the house (apartment).
- Connect the switch.
- Phase input is indicated by the letter "L", output contacts are usually marked with a "down arrow".
- Fixing an electrical device.
Standard solutions for added comfort
When youit is necessary to install a two-gang switch with illumination, the principle of connection remains the same. Of course, the practical value of such a device is much more effective, especially if you take into account the hard-to-reach areas of a house or apartment for daylight. Basement-type rooms are equipped with just such breakers, since the active LED greatly facilitates the process of finding the “necessary” key or lever. Another important element in the organization of comfortable lighting of corridors and hallways is a two-gang switch. The principle of its operation is that a person has the opportunity to control the light in one of the rooms from two or more points. Agree, it is very convenient.
In conclusion
The process of arranging, repairing or redevelopment of premises is almost always associated with the need for electrical work. So do not experiment once again, putting yourself and loved ones in danger, it is much easier to solve an urgent problem with the help of a professional.
