Neodymium magnets are now very widely used. It must be recalled that these bodies are the strongest in terms of magnetic force. Even over time, they do not lose it. But sometimes it happens that two objects are attracted to each other, and it becomes almost impossible to separate them back. In this article, you can find the answer to the question of how to separate two magnets.
Disconnection
First of all, it should be noted that simply breaking two powerful magnets stuck together is unrealistic. Speaking about how to disconnect two magnets, it should be noted that you should not even use your strength for these purposes. The maximum that you can do is to spread the objects a short distance from each other, after which they will stick together again, and your hands may be injured. The collision force of such neodymium bodies is comparable to the release of energy from the impact of a heavy hammer on an anvil. That is why notworth experimenting if you don't know how to separate two magnets. Let's take a closer look at 4 effective methods that will help deal with this problem.
Wedges
How to separate two magnets with non-magnetic wedges? First of all, you should pay attention to the fact that for this purpose it is better to use wooden tools. They are inserted between magnets. Then the grip strength decreases, after which you must use your best efforts to separate them with your hands.
Guillotine
How to disconnect two magnets at home, the power of which is 180 kg or more? To do this, you can use an improvised guillotine, for which a desk, door or chest of drawers is ideal. This method is based on the principle of cutting one magnet from another, however, a door jamb or a frame of a chest of drawers or a desk will act as an immovable supporting element. A drawer or door will act as a shift mechanism. For this method, furniture of only high-quality assembly made of chipboard, or a door made of wood is suitable.
Wooden guillotine
How to disconnect two magnets at home? For bodies of greater power, a wooden guillotine can be used. To do this, one magnet fits into the hole in the wall, and the other should move to the side with a large lever, making it possible to split them in two.
Self Power
Magnets whose capacity is less than 150kg can be brokenthrough their own efforts. To do this, sticky bodies must be placed on a flat surface so that the gluing line is located along the edge of the cabinet or table. In this case, you should pay attention to the fact that one magnet should lie on the cabinet, and the other should hang down. One hand should hold the object that lies on the surface, and the other should firmly clamp the second magnet. At the same time, you need to make every effort to rip it off. The force must be directed vertically, that is, go perpendicular to the plane of the cabinet or table. After disconnecting the magnets, it is imperative that one of them must be set aside at a distance of at least half a meter from the other.
If stuck to another surface
If your neodymium magnet is magnetized to the front door, radiator, sewer hatch, car body, then it will also be very difficult to remove it with simple movements. If the surface is even and smooth, then it will be easiest to detach the object by dropping it to the very edge of the metal sheet. Otherwise, most likely, it will be necessary to use the wooden wedges discussed above.
There are several ways to separate two stuck magnets. Most often, this occupation requires not only a certain physical strength, but also ingenuity.
