Do-it-yourself clothes hanger can be made without the help of professionals. To do this, it will be enough to prepare all the necessary materials and tools, as well as familiarize yourself with the technology of work.
Preparatory stage
Sliced pine boards will serve as the material that will form the basis of the structure. It is necessary to choose those that have a thickness within 25 millimeters. In order to complement this product with shelves, which will be fixed on the wall, you should use a glued furniture board, the width of which is 300 millimeters.
Auxiliary tools and materials
If you will make a clothes hanger with your own hands, you will need to prepare wood screws, PVC glue, acrylic moisture-resistant wood varnish, and an electric drill. You will need a jigsaw, a hacksaw, a tape measure, a ruler and a square. Wooden clothes hangers are made using an abrasive skin, a hammer, a screwdriver, a circularhand saw, as well as wood stain. The latter is necessary if there is a need to change the color of the structure. In order to make the product more aesthetic, you need to stock up on wooden furniture panels, and furniture dowels, the dimensions of which are 10x30 millimeters, will act as fasteners.
Assembling
If you will make a clothes hanger with your own hands, then after all the tools and materials are prepared, you can begin to manipulate. All parts must be well treated with abrasive paper, especially sharp edges and corners. The first ones should be rounded. Blanks should be free from chips and burrs, as well as other irregularities that are striking. In the process of work, it will be necessary to comply with a certain technology, which involves several stages. When a clothes hanger is made with your own hands, then two boards must first be laid on the table, which will be oriented vertically during operation. After that, they need to place transverse boards in the amount of 3 pieces. Once the right angles are aligned, you need to screw in the screws by installing them on the back of the transverse boards. This will connect all the parts together.
When making clothes hangers in the hallway, the screws must be sunk in such a way that the heads are flush with the surface of the transverse parts. The sharp ends of the screws must not go through the vertical boards. The next step is to fixthe remaining vertically arranged boards, providing a uniform gap between them. The width should be equal to 80 millimeters. It is important to check and, if necessary, adjust the right angles. Now you need to put a holder for hooks under the crate, and then embed two fasteners on each vertically located board. In the manufacture of clothes hangers in the hallway at this stage, the screws must be installed on the back of the transverse parts. This will give the structure additional rigidity.
Assembling the shelf
After the master managed to carry out all the above work, you need to dock the shelf with two sidewalls that act as brackets. You need to make the sidewalls in advance. Wooden clothes hangers are obtained most quickly if you use an electric jigsaw in the process. With its help, according to a previously outlined contour, you need to cut out the workpieces, processing them with an abrasive skin. To install dowels, you need to drill holes in all blanks. 4 dowels are installed in the shelf, PVA glue should first be applied to them. The sidewalls are connected to the shelves by means of dowels, which are inserted into the prepared holes. Two fasteners need to be cut into each sidewall.
Method of assembling the hanger design
If a clothes hanger will be made, the photo of which you can see in the article, then at the next stage you can assemble the entire structure. In view of the factthat the load from the items on the shelf will act on the sidewalls, they must be fixed to the vertical edge boards of the batten system as securely as possible. To do this, with self-tapping screws, you should additionally use furniture dowels. At the previous stage, holes were drilled in the ends of the sidewalls. They need to be treated with glue, driving the dowels into place. When you will be making a clothes hanger, the photo of which will help you determine the design features, you will need to make holes corresponding to the previous ones in the extreme vertically arranged boards. It is important to ensure proper docking of the pre-assembled shelf. It is necessary to fix this element of the crate with self-tapping screws. Self-tapping screws are installed on the back sides of the vertical elements - two pieces for each sidewall. After the shelf is fixed to the top edge of the element on which the hooks are installed. In this case, you can even get by with one self-tapping screw.
Conclusion
The hanger drawing presented in the article will allow you to prepare the elements for assembling the structure. Depending on the area of \u200b\u200bthe room, you can adjust the dimensions, taking into account your own preferences and exterior features. It is important that the item matches the decor.
