The ventilation system, even if it is small, includes some elements. In the event that certain sectors of the entire system, namely plugs, heaters, coolers, valves, etc., are equipped with small sensors and a special control panel is connected, then there is no need for manual adjustment of ventilation indicators.
In order for the automatic control system to function more efficiently, microprocessor controllers are used as the basis for creating shields. Usually those chips that can be programmed are used. The control panel with a microprocessor controller is also capable of more complete collection of data from sensors and their further analysis. The process of such collection is as follows: the controller compares the real parameters with those that were set, then the signal obtained as a result of the comparison is processed. After it, the control signal is sent to the execution devices.
The communication system works in several directions at once. Data collection is carried out using special sensors, after which the analysis of all collecteddata produces a control panel, special communication equipment. Such a shield can take the form of a personal computer, laptop or mobile phone. With the help of these devices, the dispatcher always knows the characteristics of the system and the indicators that come from microprocessor controllers. Typically, data collection occurs on the following indicators:
- Temperature level.
- Quality composition of the air.
- The level of pressure that operates in the air shaft.
- Time to replace all necessary filters.
- Alarm level.
When certain signals are received, the dispatcher must immediately intervene. It is possible to suspend all work until the necessary measures are taken to solve the problem. This can be done only if a special module is installed in the ventilation control panel, which communicates with the operator's phone or personal computer.
Communication tools allow you to remotely intervene in the ventilation process in order to further adjust and change the parameters that were previously set. This function, which the control panel provides to the operator, although it sounds a little fantastic, has long been used in real practice.
Through the use of programmable controllers with openprotocols can remove all differences between various devices. Such sensors allow you to install control units that are assembled from different modules. Thus, it is possible to reduce the cost of the entire ventilation system without compromising quality.
In addition, if you use a pump control panel, you can reduce the cost of energy resources and equipment, which is necessary to protect the system from power surges and misuse.
