Everyone wants to have a cozy and beautiful home. It often takes a lot of effort to do this. For example, if you have parquet on your floor, it must be restored from time to time. And you can do it yourself. Naturally, one should consider the technology of restoring this material. After all, the tree is always a success, and it is expensive enough to change it often.
What breakdowns can occur?
First, let's figure out what can happen to your flooring. So, the most common problem is the appearance of scuffs. The reason for this situation can be not only prolonged use of parquet, but also improper care for it. In addition, over time, it may begin to creak. It all depends on how high-quality the material was originally, as well as on whether the product was laid in good faith.
It is also considered a very serious problem for items to fall out or break. In this case, of course, you will have to change them. If your parquet is damaged in this way, restoration may take some time. After all, the material will have to be re-selected and produced allother actions.
Preparing for repairs
Before starting the main work, you will need to collect all the necessary tools and material. At the same time, try to do everything to speed up and facilitate your work as much as possible.
- Remove all the furniture you can from the room. Cover the rest with cellophane. Also remove all carpets, rugs, paintings. That is, the room should be as free as possible. The fact is that most of the activities will be accompanied by the formation of dust, so try to protect your belongings.
- If you have parquet flooring, restoration involves cleaning the premises before starting work. That is, remove all dust and wipe the floor with a damp cloth. Naturally, after that it should dry.
- Put on work clothes.
Floor cycling
Now the actual restoration of the parquet will take place. The price of this event ranges from 5 to 10 dollars per square meter, sometimes even higher. However, you can do all the actions yourself. Naturally, for this you should know the order of each stage of restoration. The first of these is scraping.
Before starting this procedure, try to protect yourself, that is, any laces or parts of clothing should not touch the machine (if any). To carry out the steps, you will need a special tool for grinding wood. Thanks to this procedure, you can get rid of bumps, roughness or scuffs on the parquet. First40 sandpaper is used. After it, a finer sandpaper can be applied.
After the initial treatment, large gaps can be puttied. After the mixture dries, you can walk with the finest sandpaper. Next, the room should be thoroughly cleaned.
Features of varnishing flooring
So, if you have parquet, the restoration also involves the application of protective and decorative layers of varnish on its surface after sanding. For this, a roller is most often used. Naturally, you can also change the shade of your flooring by darkening it. To do this, you can use stain. Just two layers are enough to get a chestnut color. Before applying all paints and varnishes, try to vacuum the floor, as all the specks will subsequently be visible and spoil the appearance of the parquet.
Please note that all materials you use must be of high quality. It depends on this how long they can perform their decorative function. Please note that the first layer will take quite a lot of varnish, as it will be absorbed. For the other two layers, you will have to spend less substance. Such restoration of parquet in Moscow can be quite expensive. Therefore, knowing the technology of performing all actions, you can significantly reduce the cost of your repair.
Features of replacing a damaged board
Restoration of old parquet may include layingnew elements, if the old parts were greatly loosened or fell out of the overall composition. The work consists of several stages.
- First, remove the damaged element. Do it carefully.
- Completely clean the hole of debris, dust and adhesive residue on which the bar was attached.
- Cut off the ridges of the new plank and fix it in place with epoxy or bare nails.
- The installed element should be pressed with something. When doing this, do not forget to remove the remaining glue so that they do not have to be scraped off later.
- Further, the treated area should be cleaned and varnished.
If you just have loose elements, then you can fix this problem with small wooden wedges. The gaps between the boards are sealed with special mastic.
Helpful tips
If you have parquet as a floor covering, do-it-yourself restoration can be done quickly enough. However, one should not forget about some of the nuances of this procedure.
- Please note that sanding should only be done along the grain of the wood. At the same time, do not press too hard on the machine and do not linger in the same place for a very long time.
- Do not use too coarse sandpaper, as it can damage the boards. It is better to start with a material that has a medium grain size.
- Each coat of polish should dry well. This may take several days.
- Use only high-quality equipment for work.
- Do all work as carefully and carefully as possible so as not to get hurt or damage the parquet.
If you are not sure that you can do everything right, then try to restore a small part of the floor in the most inconspicuous place. If in this case it did not work out, then it is best to use the services of professionals. That's all the rules for the restoration of your flooring.
