If you look at the range of heat exchangers on the market, you can see that Funke's heat exchangers are some of the best in analog solutions. They are distinguished by a high heat transfer coefficient, the possibility of an additional increase in power, as well as the presence of a self-cleaning effect. The latter feature is provided by the use of a highly turbulent flow in operation.
Customer reviews of the main features of Funke brand heat exchangers
When operating heat exchange equipment, reliability in terms of media mixing is important. The described heat exchangers provide its high degree. They are easy to dismantle and clean, they are compact, which gives advantages and the ability to install even in small spaces. According to consumers, Funke are heat exchangers that have a unique design and meet high quality standards.
Additional qualities
If the conditions of their operation are observed, then the costs will be minimal. In the process of using the heat exchanger, it is important to monitor the seals, which will be subject to natural wear. The plate pack, depending on the mode of operation, can be tightened to reach its minimum size. The seal, if necessary, according to consumers, is quite easy to replace. After that, the equipment can be used at full capacity.
Overview of plate heat exchangers by brand
On sale you can find many varieties of plate heat exchangers of the described brand. For example, the Funke FP 22-55-1 EH heat exchanger is an equipment that consists of a package of heat transfer profiled plates. They have seals that separate channels and media.
This series should include a semi-welded heat exchanger, in which the plates are welded on one side and form cassettes. The other side of the channels is compacted by the standard method. The Funke FP 09-31-1 EH heat exchanger can be used in different conditions, which will depend on temperature and pressure. The semi-welded version is designed for high pressure, it is also used in refrigeration.
If you have equipment with the designation FPSF in front of you, this indicates that the heat exchanger has a separate channel for contaminants, the latter of which may contain solid particles. Structurally, this option is similar to the one described above, but the difference is in profiling, in which the pointscontacts are arranged in one row and are reduced. The Funke FP SS heat exchanger is a ruggedized, double-walled heat exchanger. The plates have corrugated plates in the composition, which form narrow channels. The plates are well compacted by the standard method. Similar devices are used for cooling acids and lubricating oil, as well as in equipment that is operated to solve environmental problems.
On sale you can find heat exchangers marked APL. By design, they are similar to those indicated by the letters TPL. The design has turbulent details, and a distinctive feature is the shape and method of connection, which is provided for gas cooling.
The Funke GPLK 20-30 heat exchanger consists of profiled smooth plates, between which profiled turbulent plates are located. They are soldered into a single block during the production process. These heat exchangers are used to cool hydraulic and engine oils. The units have found their application in heating plants, heating equipment and air conditioners, as well as cooling devices.
Operational Benefit Feedback
Funke are the heat exchangers most frequently chosen by consumers for a variety of reasons. Among them, buyers highlight the use of turbulent flow in operation, due to which it is possible to achieve the most intense heat transfer. This mode minimizes surface contamination. The designs use asymmetrical channels. Byconsumers believe this reduces the number of inserts and their size.
PHEs are fairly easy to disassemble for repair and maintenance. Cleaning, according to customers, requires less labor compared to other types of heat exchangers. This indicates high serviceability. The volume of water in the channels is relatively small, which results in the possibility of rapid temperature control.
Why else choose Funke plate heat exchangers
Funke - heat exchangers that allow you to select equipment according to power. If there is a need to increase the rated power, then the heat transfer surface can be easily changed by the consumer. The material for the manufacture of plates is acid-resistant steel or stainless steel. If the heat exchanger is supposed to operate in an aggressive environment, then titanium is used for it.
The probability of corrosion is completely absent, because the material for the manufacture of plates is selected taking into account the possible presence of certain impurities in the water. Heat exchangers are designed in such a way that in the event of a leak, it can be detected and eliminated fairly quickly. The Funke plate heat exchanger eliminates media mixing, even if emergencies occur. The cost of the device, as well as the number of plates, are reduced due to the use of an asymmetric channel in the design.
Advantages and main featuresheat exchanger Funke FP 10-25
Funke brand heat exchangers are used in various industries. But this feature is not the only one that the consumer should pay attention to. Among the additional pluses, it is necessary to highlight:
- high quality materials used;
- operational safety;
- impressive heating area;
- durability;
- unpretentiousness;
- availability.
The production uses high quality materials, this also applies to gaskets and seals, which extend the life of the device.
Conclusion
Funke plate heat exchanger has earned the recognition and popularity of the domestic consumer. No model of this brand is an exception. The units are durable, reliable and affordable. They are characterized by outstanding technical characteristics and heat transfer qualities. The devices do an excellent job with their tasks and are widely used in many industries. Among them it is necessary to allocate chemical, gas and oil. Heat exchangers have found their application in metallurgy and have become part of heating systems.
