The electric stove, like any electrical appliance, is a source of high danger. Incorrect connection, and therefore the use of an electric stove socket, is a common cause of fires. Therefore, it will be useful to familiarize yourself with the product passport before installing it.
The main question that arises when installing a socket for an electric stove: what is the power consumption of the device used? The choice of wires that will be connected to it depends on this factor. For about 10-15 years, all manufactured electrical products have been produced mainly according to European standards. That is why to connect a modern electric stove, three wires are required: phase, zero and the third - ground.
What is grounding for?
If your house dates back to the times of Soviet development, then most likely you will not have grounding. You can run the third wire by inviting a specialist (electrician). You will need grounding not only to connect the socket for electric stoves, but also for most modern household appliances.appliances in your home. You can determine the need for a third wire by looking at the plug of the device.
Before installing the electric stove, it is necessary to check the machine that is connected to the input. It is located in the shield directly on the landing. Before installing it, you must make sure that the cable that is brought into the apartment has a cross section of at least 6 mm. Otherwise, it will need to be replaced.
The ideal option would be to connect the socket for electric stoves through a separate machine with protection. Such a device will allow you to quickly turn off the electricity if the body of the stove suddenly becomes energized.
Selection of sockets
In order for the new electric stove to serve you for many years, you need to choose the right outlet for it. It is to pick up, and not to buy the first one that comes across. To do this correctly, carefully read the product passport. In most cases, a 40a electric stove socket is ideal. If the power is three-phase, then it should have 5 pins. This type of socket has holes for "euro", so you can connect almost any plug to them.
Installing an outlet
Mounting sockets for electric stoves is made using dowels and self-tapping screws. During installation, it is better to turn off the mains voltage.
Thus, a properly connected socket for an electric stove, the price of which fluctuates inwithin 150-300 rubles, will serve you for a long time and exclude the appearance of possible short circuits. All of the above work must be carried out by a qualified specialist - a master electrician. Otherwise, in the event of trouble, you will have no one to file a claim with, and the agency will not reimburse you for insurance, if any.
Knowing the features discussed, you can protect yourself and loved ones from possible problems associated with installing an electric stove.
