A person's dream of owning a home is quite feasible. And your main assistant in this is the Canadian technology for building a frame house. It has become so popular because of the simplicity, speed of erection and high performance of the building. We'll show you how.
Floors
The factory-made kit of the house is delivered to the construction site. Attached is a detailed assembly drawing. First, the foundation is poured, panels are placed on it, which act as floor slabs. Unlike walls, they additionally require insulation from below, for which they are coated with bituminous mastic. All panels are interconnected, pre-foamed, and fixed with self-tapping screws. The thickness of the styrofoam boards is enough for the floors to be warm. The technology of building a frame house allows you to then build in a system of warm floors on top of them. A strapping beam is placed from the ends into the technological ends of the panels; it increases the strength of the structure in a horizontal position. All these works take only a few hours.
Walls
Next buildingframe house involves the construction of wall panels. To do this, strapping bars are attached to the floor ceilings using self-tapping screws. To place this material correctly, check with the template. Then it is necessary to drill holes for anchor bolts, they connect the timber and panels and fix the structure to the foundation. The construction of the walls should begin from the corner of the house, securely attaching the panels to the strapping beam. The second wall panel is attached to the first at a right angle, having previously foamed the joint. All parts are connected to each other with self-tapping screws 220 millimeters long.
Bay window
The technology of building a frame house also allows you to increase the space with this architectural solution. The bay window is assembled from modified panels that are joined at oblique angles. Technological grooves are filled with foam and strapping boards are placed in them.
Overlaps
The floor panels, despite their lightness, are strong enough. For greater structural strength, they are attached to the beams with self-tapping screws.
Roof
The load-bearing elements of a gable roof are panel gables, which, in turn, are connected by parallel load-bearing beams. Roof installation work begins with a “ridge” (main beam), which has a two-sided side bevel equal to the angle of the slope. In order to avoid deformation of the panels in winter, between the roof ridge and the walls parallel to it, each slope is supplemented with intermediate beams - girders. For support, there are supportbars. If the area of the house is 300-400 sq.m., the roof is assembled in about two days by 4 people.
Frame house construction technology is the installation of finished panels according to the drawing. The panels provide high heat and sound insulation of the structure, which makes it possible to do without additional roof insulation, only a fine finish of the ceiling from the inside is required. The outer surface will be suitable for laying the roof.
Doors and windows
They in a frame house can be of any known design, and the methods of their installation will not differ from those recommended by the manufacturer.
Using such an approach as the technology of building a frame house, with your own hands you will fulfill your dream - get your own property and invest a minimum of money in it.
