C44 corrugated board is considered one of the best materials for external wall cladding and roof construction in residential and industrial facilities. In addition, it is used as an integral element of protective structures. The main advantage of this material is its low price.
Production
For the production of this corrugated sheet, steel sheets of a certain thickness are used. Then the rolls of this metal are loaded into the machine. Waves in the form of a trapezoid are bent from a perfectly even sheet, all this work is done by a bending machine in which standard dimensions are pre-set.
With the help of scissors, as well as a guillotine, the marking and cutting of these sheets is carried out. Thickness and width are taken from GOST about this product. These settings are standard. Sheet length may vary.
After the sheets are made, they are painted. Paint is applied special powder. Work is carried out using a spray gun, polyester, polyester or varnish is applied, this is the last layer. In addition, there is also an initial layer, basically three layers of paint are applied when staining.
Features
The main features of C44 corrugated board are rigidity and lightness. Thanks to these indicators, it is resistant to strong winds, easy to install and carry. For its production, sheets with a steel thickness of 0.5-0.9 mm are used.
Scope of corrugated board С44
- Construct various structures and outbuildings.
- Used for roofing.
- Build walls and partitions in the form of shields.
- Establish fences and fences.
- Formwork for reinforced concrete is being built, without subsequent removal.
- Construction of special frames of buildings to give them strength and rigidity.
A wide range of applications for this material has found its purpose in roofing. Thanks to the profiled sheet coating, snow does not cause any damage to it, all other atmospheric influences are not terrible for this roof.
Thanks to the ribs made during the production process, which give rigidity to this sheet, various structures are built from it, both for domestic and special purposes.
Profile dimensions
This sheet is designed for the construction of partition walls, the strength is consistent with sheets with H and HC characteristics, so it can be used for load-bearing walls. The scope of use is quite wide and varied, due to strength and rigidity, sheets are in great demand in construction.
Standard sheet settings
- The wave is 44 mm high.
- 1000 mm sheet width.
- The length can have the following sizes 0.5-12 m.
- Weight of corrugated board C44 5-8 kg.
- Sheet thickness 0.5-0.9 mm.
The specified width in this list is useful. It is used to calculate the required amount of material, since when designating it, the required value for connecting these profiled sheets has already been deducted. This value is calculated by the manufacturer and is taken as 47 mm.
When choosing profiled sheets for roofing, it is necessary to take a sheet thickness of 0.7 mm. If you plan to build buildings, hangars, sheds and the rigidity of wall coverings and partitions is important, you need the largest indicator - 0.9 mm.
During installation, this material is very easy to transport and lift to roof height. If this work is necessary, it must be carried out carefully so as not to disturb the outer protective layer of the profiled sheet.
How to choose corrugated board
The surface of these sheets may have different coatings. Release:
- C44 galvanized corrugated board;
- alimine-zinc;
- aluminum silicate;
- with polymer dyes.
Currently, polymer-coated C44 corrugated board is the most popular and in demand, as it has a lot of different colors and shades. The sheet has a zinc coating on one side, and polymer dyes on the other.
The most profitable will be the purchase of this material at the manufacturer's factory, since the price of C44 corrugated board (on average itis 300 rubles per sq. m.) will be several orders of magnitude lower, especially when buying in bulk. If the client needs a sheet with fewer waves or a different shade, all these characteristics can be ordered from the manufacturer. Let us further consider what characteristics C44 corrugated board has.
Key Features
This material has a high resistance to corrosion and weathering of the environment, so it is suitable for areas with difficult climatic conditions, especially with high rainfall.
Sheets are issued:
- C 44 A 0.5- C 44 A 0.9. They have a useful width of 1050 m, while the thickness of the sheets is 0.5-0.9 mm, the weight per 1 square meter is 5.5-9.4 kg.
- Sheets C 44 A B 0.5- C 44 A B 0.9. Usable area 1050 mm, thickness 0.5-0.9 mm, weight 5.5-9.3 kg.
All sheets have trapezoidal waves. There are 6 such waves in a standard sheet, the height of this recess is 4.4 cm, the width is 3.5 mm, the distance between the waves is 100 mm.
If a sheet with the characteristics of HC 44 1000 is chosen for construction, this material will cost more and weigh 100 grams more than sheet C 44. Sheet C 44 is intended for covering and building walls.
This material is able to withstand high loads, has high strength and rigidity. Since the material is not heavy, there is no need to call in expensive high- altitude loading and unloading equipment for its installation.
The letter C indicates that this profiled sheet is intended for walls, marking inthe form of the letter “K” - for the roof, “H” for ceilings and formwork, which then does not need to be removed, “HC” for coatings and walls.
Due to the fact that corrugated board is almost universal, sheets marked with C44 are used for both walls and roofing.
According to the purpose, the division of corrugated board into different brands is rather conditional. So, for example, C44-1000 corrugated board is used with equal success both for the construction of wall fences and for the roofing of residential buildings.
The following blanks are used for the production of this material:
- Cold rolled galvanized steel.
- Zinc-aluminium-coated rolled metal.
- Rolled thin sheet aluminized and aluminum flint coated.
- Rolled metal and electrolytic zinc coating.
In construction, these sheets are used:
- for a roof with a crate of 2 meters, with any slope;
- for the construction of utility facilities: these are garages, warehouses, hangars, pavilions for trade, warehouses;
- for fencing construction sites and construction sites;
- civilian and industrial facilities.
The widespread use of this building material is due to its high wear resistance, strength and reliability. In addition, its cost is acceptable, and these sheets can be used several times.
C44 corrugated board is used for the construction of fences and railings, in conditions of strong wind exposure. Suitable for fencing various facilities and warehouses built in the field, as well as other areas,exposed to the wind.
These roofing sheets can be used in the central part of the Russian Federation. Due to the wide and varied range of colors, this material is also used for the construction of fences. At the same time, the yard is stylish and sophisticated, thanks to the combination of colors.
Also, C44 corrugated board can be used for the construction and cladding of the facades of various structures, such as summer kitchens, garages, baths, sheds. This coating will serve as a protective, durable and at the same time decorative decoration of any yard.
To select a color, you need to contact the manufacturer or look at all the data of interest on the Internet. On the website of the company representing this manufacturer, you can study in detail all the dimensions, length and width, color shades of corrugated board.
Conclusion
This material is very durable, reliable and inexpensive, thanks to these characteristics, it has become very popular throughout Russia. After all, in addition to the protective functions with its help, buildings are given an elite and prestigious look. When choosing bright colors, you can create a bright and cozy courtyard that will please not only the owner, but also all passers-by.
