Plywood birdhouse: ideas, drawing, step by step instructions

Table of contents:

Plywood birdhouse: ideas, drawing, step by step instructions
Plywood birdhouse: ideas, drawing, step by step instructions

Video: Plywood birdhouse: ideas, drawing, step by step instructions

Video: Plywood birdhouse: ideas, drawing, step by step instructions
Video: EASIEST DIY Birdhouse with Minimal Tools, Every Step Explained 2024, March
Anonim

Plywood birdhouse is a great thing. This cozy and beautiful house for birds will decorate a garden plot or a balcony of a high-rise building. Taking care of birds is a good thing, because they not only give us their singing, but also fight insects in the warm season.

Terem for birds

A birdhouse made of plywood, wood or any other materials at hand is installed mainly on cold days in autumn and winter. The bird houses contain food and water for the birds to feed them. Some summer residents, worried about their harvest, settle winged creatures nearby to drive aphids and other unpleasant trifles away from the garden.

Making a birdhouse out of plywood is not an easy task, but with the desire and diligence, anyone can succeed in building a "bird house".

bird house
bird house

Things to think about

The birdhouse is made from various materials: wood, cardboard and even large plastic bottles. We will make a plywood birdhouse. Before starting work, you needplan the walls and roof of the birdhouse. You will need a detailed drawing of a plywood birdhouse so that all the details are prepared and nothing is overlooked.

Before building a birdhouse, you should consider what birds it is made for: starlings differ in size from other birds.

The birdhouse must be made to all relevant standards and be easy to use. It should have a flat surface, a stable bottom and a removable roof. A notch is needed under the roof - a hole for birds, thanks to which they will get inside the house.

Removing the roof of the birdhouse, you can clean inside the house, clean the walls, change water and food.

Instead of a nest
Instead of a nest

Production requirements

Plywood birdhouse must meet all the necessary requirements:

  • The roof must be removable, but stable so that no other animals can climb into it or get birds and eggs.
  • It should be strong and dense, in no case transparent.
  • The material from which the birdhouse will be assembled should not have cracks, crevices, sharp particles. The house must be heat resistant and soundproof enough.

Without hands, without a hatchet, a hut has been built

The following material is used to build a birdhouse:

  • large plastic bottle;
  • boards;
  • foam;
  • cardboard;
  • log;
  • plywood, chipboard, fiberboard.

For our smaller feathered brothers, unique constructions are made from the mostunexpected and simple improvised means. Birdhouses are made from:

  • old boots;
  • small kegs;
  • branches;
  • pumpkins;
  • vines;
  • traffic.

In our case, the bird house will be made of plywood sheet.

The birdhouse is not very warm from plywood, so in the cold season it will need to be insulated with something. Dry grass retains heat well and is comfortable enough for birds.

House for starlings
House for starlings

Types of birdhouses

The design of the bird house can be very different, but basically there are several of the most common types:

  1. Shed - usually made for wagtails.
  2. Domishko "diamond" - housing for redstarts.
  3. Hollow "bed" - for jackdaws and owls.
  4. Flycatcher - for flycatchers.
  5. Poluduplyanka - house for robins.
  6. Sinichnik - "apartment" for sparrows, tits and small owls.

Before implementing the idea of birdhouses, you should choose the most suitable option in order to prepare materials and drawings.

The wagtail house is placed on its side and a small step is attached in front of the notch. These birds are characterized by weak legs, and such a structure will help them get inside without much difficulty.

Puluduplyanka is installed among the branches of trees. Usually, a hole in this nest is cut out across the entire width of the front wall. Care must be taken to ensure that a squirrel does not sneak into a small cozy house. These animals are very fond of such"flats".

Duplyanka - a birdhouse, hollowed out in a hollow. It is made by sawing dry wood to the size of birds that willingly populate new "apartments".

Let's take a closer look at how to assemble a birdhouse from plywood.

Beautiful birdhouse
Beautiful birdhouse

Required dimensions

Before building a plywood birdhouse, you need to determine its size. You have to decide which birds you can put in it:

  • The half-hollow is inhabited by birds that hover in the hollows of the trees. Its height is 20 cm. The size of the bottom is 80 by 100 mm. The letok is cut out in the form of a longitudinal slot, 35-50 mm high.
  • The flycatcher is made according to the same dimensions, only the notch is made a little smaller. 30 cm is enough.
  • The size of the titmouse is 25-30 cm in height, the bottom is 10 by 12 cm. The notch is 3.5 cm. The shape of the house is round.
  • The starling house is also round. Height - 30-40 cm, bottom - 100 by 100, notch - 5 cm.

Tools for building a birdhouse

If the birdhouse is made in the recommended proportions, then the birds will lay eggs in it. However, they will not be able to feed a large offspring.

Before work, you need to prepare all the necessary tools and materials:

  • drawing of a plywood birdhouse;
  • ruler and pencil;
  • jigsaw, wood saw;
  • nails;
  • wood glue;
  • drill or chisel;
  • hammer;
  • details for decoration;
  • water emulsionpaint;
  • work apron or robe.
house drawing
house drawing

Step by step instructions:

How to make a birdhouse with your own hands? Action Plan:

  1. Transfer the details of the drawing to a piece of plywood. Cut pieces out of plywood with an extra gap. Parts of the top and bottom should show through the walls of the birdhouse a little.
  2. Slices of parts are carefully sanded.
  3. Connect the walls and the front of the house with glue and self-tapping screws. After the glue has completely dried, strengthen the parts with nails. When finished, attach the back of the facade.
  4. Reinforce the bottom around the entire perimeter.
  5. It is desirable to make the roof removable. This moment is very important, since from time to time it is necessary to clean and clean the birdhouse, add food and change the water. The roof is fixed with two screws. It should hang a little over the front of the facade, about 3-4 cm, to form a visor.

The main part of the birdhouse is ready.

birdhouse - grandfather
birdhouse - grandfather

Housewarming at the starling

After construction, there is an easier, but no less interesting task - how to decorate a plywood birdhouse. For an aesthetic and original decor of the tower of birds, inspiration and ingenuity are required. There are several interesting ideas on how to make a birdhouse bright and beautiful:

  • Paint one or more colors. Paint color optional. The combined double coloring of the walls and roof will add fabulousness to the house. Use your imagination and have fun as a house painter painting wallsnesting in bright colors!
  • Roof trim. You can give a rural touch to the look of a birdhouse by covering its roof with small pieces of hay or rope flagella.
  • Cutting patterns on the walls give the birdhouse an original look.
  • With the help of small twigs or ice cream sticks, you can equip the house with a pretty fence, decorated windows and steps.

Fantasy and skillful hands can reproduce a masterpiece for bird habitat and home garden decoration. What only original models will not come up with! Birdhouses are made in the form of a hut, a bird with a beak near the notch and wings along the side walls, a castle tower.

For a birdhouse, safety is important from all creatures that pose a threat to birds: cats, dogs, foxes, ferrets. The nest must be hung high on a tree so that no animal can harm its inhabitants.

Birds are the gardener's little helpers. They eliminate harmful insect species and delight with their cheerful chirping. Birds undoubtedly deserve our attention and care.

Recommended: