The question that every amateur gardener asks himself: "How to tie up tomatoes in a greenhouse?" After all, the correct and timely garter of these vegetables is the key to a high-quality and large harvest. Many people know that if this procedure is not done on time, then the bushes break over time, and the fruits ripening on the ground are sweet prey for slugs.
And yet: how to properly tie up tomatoes in a greenhouse? There is no set recipe, but there are some rules to follow.
The first and most important of them: the material with which you will tie up the tomatoes should not crash into the tree trunk or overtighten it. Therefore, it is better to use wide shreds as such a tool, for example, cut from old clothes, or twine, which should not be thin. The width of a piece of fabric should be no less than three to four centimeters. Do not use wire, fishing line or similar materials.
In the season you will need to change the garters 3-4 times. As soon as the plant has grown, it is necessary to change them or move them higher. During the season, the garter itself does not need to be changed, but it must be done next year.required.
How to tie up tomatoes in a greenhouse? There are several ways. The most common of all existing ones are support stakes. As such, you can use fittings, narrow wooden sticks, and plastic pegs are also sold in specialized stores. They are driven into the ground to a depth of 30 centimeters near the bush (at a distance of no more than 10 centimeters). The height of the stakes must be calculated based on the variety of tomatoes.
The dressing material is loosely wrapped around the trunk. To tie up tomatoes is a rather difficult and painstaking work, but the harvest obtained thanks to her is worth it. If there are heavy brushes on the tomato bush, they should also be attached to the support.
The method described above can be used both in greenhouses and outside them. Another option is quite widespread, but it can only be used in greenhouses. How to tie up tomatoes in a greenhouse? Tomato bushes are fixed on linear trellises. Stakes 1.5-2 meters long are placed along the edges of the row. A wire, a fishing line is pulled between the posts, and a garter material is already attached to it. So, for each tomato bush, it must be its own. It is necessary to constantly observe that during the entire growth the bush wraps itself around its rope. Once the plant is large enough, it should be monitored daily.
The trellis garter for tomatoes has a second variety. Several rows of wire are stretched between the stakes orfishing line at a distance of about 37 centimeters. Stems are attached to them. The advantage of this type of dressing is that the tomatoes do not have to be sorted into stalks. Experienced gardeners build specialized frames that they can move if needed.
Now you know how to tie tomatoes in the greenhouse. This should help you get a quality harvest.
