Assembling a broken tractor with your own hands is quite an interesting activity, which, however, is not for everyone. Basically, such equipment will be required only for those who keep large-scale agriculture, where it is necessary to dig up large tracts of land, as well as plant a large number of crops.
Do-it-yourself tractor
When someone talks about assembling a break tractor with their own hands, many people always imagine too difficult and often impossible work, especially for a home master, but today this is no longer the case. In addition, today there are quite a lot of variations in the assembly of this special type of transport. Among them there are those assemblies that are quite capable of being assembled by both an experienced master and a beginner in this business.
To begin with, after deciding to assemble a break tractor with your own hands, it is worth considering its design, namely the frame. There are several main frame nodes. Firstly, these are the spars, which are distinguished by a three-stageassembled building. Those steps that are located in front are assembled from channels of the tenth size, and the last from a square profile pipe, with sides of 80 x 80 mm and from high-quality steel. There are traverses at the back and front. The front is made of a channel of the sixteenth size, and the rear of the twelfth. The same system will work for assembling the cross bars.
Clutch for implement
When assembling a break tractor with your own hands, you should pay attention to the engine, the power of which should be suitable for the tasks. Quite often, the choice stops at a 4-cylinder water-cooled engine, as well as diesel fuel. As for the transfer case and gearbox, it can be taken from an unnecessary VAZ-53, but the clutch for a 4 4 break tractor is best taken from a VAZ-52.
Quite a lot of work remains to be done with the fact that it will be necessary to make an engine flywheel to dock the basket and the power unit of the device, as well as to make a new casing for the basket. This is necessary in order to properly fit it to the correct dimensions for the break tractor.
Wheelbase
As for this aspect of the tractor assembly, it is very important. Here, of course, you can simply install disc wheels from an ordinary car, but experts recommend taking measured steps in this direction and starting with 14 inches.
If you take smaller disks, then there is a rather high risk of problems withmovement in the future. It is worth noting here that it is very important that the home-made mini-tractor-fracture does not fall into the ground while driving. However, too large wheels are also not recommended. The problem lies in the fact that maneuvering and generally driving a vehicle that has huge wheels is quite difficult.
Breaking frame advantage and tools
In order to significantly increase the maneuverability of such a vehicle, you can install hydraulic control on it. You can find suitable hydraulics on the equipment that was decommissioned.
In addition to hydraulics, the presence of a breaking frame greatly affects maneuverability. The frequently asked question about how to make a do-it-yourself tractor-fracture implies just the creation of a tractor with such an unusual frame, which is its main feature. Such a frame greatly increases the maneuverability of the equipment. However, along with this, you need to understand that the assembly will become more complicated, since it will be necessary to design a very high-quality and reliable shaft with strong and strong connections.
When making such a design, cardans, which must be removed from trucks, will be good and obligatory helpers. As for, for example, the front wheels, the drum brake installed on cars is perfect. In general, if we talk about the necessary spare parts, then many of them will have to be removed from other cars.cars.
As for the mandatory tools that will be required for assembly, they are as follows: a welding machine and a drill, a wrench, a disc plate and some others.
Assembly of control system and seat
As for the seat for such a tractor, you can use an ordinary car seat. The installation of the vehicle control system and its kinematic scheme begins after the running gear has been designed. Correct seat placement plays an important role here. At this stage, it is also recommended to correctly calculate and install the steering wheel to control the tractor. It is very important to choose the right height so that your hands do not get tired during work. At the same time, the height should be such that there is no discomfort not only for the hands, but also for the knees and legs, and therefore it is also not worth setting it too low.
Power plant and assembly
After the undercarriage is assembled and the control is implemented along with the kinematic scheme, you can proceed to a rather important part - mounting the engine for a tractor with a breaking frame. In order to carry out a high-quality installation of such heavy equipment, which, moreover, constantly vibrates during operation, it is necessary to use a special plate that has grooves for attaching the power plant. The necessary rigidity will also be obtained for the chassis, if you use this plate. After installing this unit, you can proceed to the laying of all mechanical and electrical circuitsmanagement. As for the body skin, here each manufacturer can do whatever he needs, according to his personal opinion.
As for the assembly technology, it is worth thinking about it at the initial stage, since a mini-tractor can be created for different purposes, and therefore its additional equipment may change. It is possible to install a mowing machine, cutter, etc.
As for the arrangement of a breaking frame, everything here can be described quite simply. A walk-behind tractor is required, which is located on a frame mounted by oneself.
General Assembly Tips
Worth mentioning why so many people take it on themselves. The price of a mini-tractor for a household of this type starts from 40 thousand rubles and can reach up to 100 thousand rubles. It is clear that the amount is quite large, and therefore making it with your own hands is a tempting idea.
Therefore, there are some general tips. For example, if the Neva model is chosen as a walk-behind tractor, it is best to purchase it immediately with a hitch, since in this case it will be possible to transport goods and a trailer with a body.
Quite often, the Centaur walk-behind tractor is chosen as the basis, which is diesel and has a power of 9 hp
The price of a mini-tractor for the household is clearly much higher than the cost of a conventional walk-behind tractor, and many components can be removed from an old passenger car, for example. Therefore, many owners resort to assembling such a unit with their own hands.
