When the strip foundation is installed correctly, it gives confidence that it will be a reliable foundation for future construction. The main property of the building foundation is its good stability, balance and proper compensation of all power loads. Therefore, one who undertakes such work must know well how to pour the foundation.
If you are starting to lay the foundation for the first time, then at first something may go wrong. However, do not despair. In this article, we will try to explain to you how to pour the foundation of the house.
First of all, everything must be done so that the poured monolith must be strong and reliable.
Starting pouring the foundation with your own hands, you need to have a little theoretical background. Start by preparing a place for the foundation. If you notice that water is accumulating at a construction site, then there is no need to wonder if drainage is needed in this place. Geological exploration is indispensable here. Before pouring the foundation, calculate the load on the future foundation anddevelop a diagram. Be sure to determine the parameters of the structure and its weight.
In the zero cycle, the main role is given to the foundation. You need to calculate in advance what expenses you need to plan for this development. Therefore, you should choose the best option for installing the foundation and approximately calculate the future costs of it. Before you start pouring the foundation, you will need to perform earthworks in this area. To do this, outline the border and mark it with pegs. Everything needs to be done smoothly, then to start pouring the foundation.
At the bottom of the trench it is necessary to put a filter "litter", consisting of 10 cm of gravel and 5 cm of sand. Then you need to apply reinforcement, the diameter of which is 8-10 mm. It forms a mesh. It is not recommended to fill the foundation in parts so that butt joints do not form. They are considered the weak link of the building, and therefore disagreements in the correct docking occur all the time.
Now let's move on to the question of how to properly fill the strip foundation. Its filling should not be done in parts. Your construction may take a long time, as you will have to take a week off for each layer to become strong.
If you decide to start building a house yourself and do not know how to fill the foundation, then use our recommendations.
You should know that when pouring a strip foundation, you must adhere to this principle. The "base" supports all the walls of the house, and thus it will beevenly distribute the load on the "box". The concrete "tape" will firmly connect the building to the ground. This will save you money when compared to installing a solid sole.
Knowing exactly how to pour the foundation, you can make a strong foundation. First you need to prepare the concrete. It consists of water, sand, crushed stone and cement. You can order a ready solution. Remember that the brand of cement must be 2 times higher than the output characteristics of concrete.
This is what the finished foundation will look like. Now you can start building a house.
