The purpose of the article is to tell the reader how to make a clock from a record. The advantages of this product are its unique design and simple production from improvised materials. The main thing is to find an old record, which many consider a useless thing. But craftsmen know how to make unusual objects out of it. Making a clock from a record is an easy task that requires further study.
Installing the clockwork
Homemade product must be equipped with this part. In this case, you will have to install the clock mechanism with the arrows directly on the plate. To make an original watch, you first need to follow a few simple steps:
- Fix with glue exactly in the center of the main part of the mechanism. The main condition of this stage is to fix the device on the end side of the plate.
- Install arrows that should exit through the center hole.
The feature of vinyl records is easy processing, because they are easy to cut and melt. Thanks toThis advantage will make it possible to make watches of almost any shape. After completing the initial work, it is necessary to decorate the product. There are several methods for decorating a watch from a record:
- creating the desired shape after heating;
- cutting the pattern along the contour with a manual jigsaw or drill;
- decoupage source material.
The last option is a technique for decorating an object, the essence of which is to apply a layer of varnish on the product, and after it dries, stick a special napkin with a pattern or ornament on the surface of the watch. Each of the methods needs to be considered in more detail.
How to make a clock from a plate by heating with your own hands - instructions
Just installing a mechanism is not enough to make an unusual device. Therefore, a good option for creating an original product is to heat the plate, for example, in an oven and give the material the desired shape. To make a clock yourself using this method, you need to follow these steps:
- Preheat the oven to a certain temperature and put an unnecessary record in it.
- Remove the material after a few minutes and give it the desired shape with your hands.
- Fix the clock mechanism in the center of the workpiece.
Do not forget about safety precautions - the described work must be carried out in heat-resistant gloves.
Using a drill to make clocks from records
In order not to damage the mechanism, it is desirableremove while work is being done. To make your own watch from a plate of an unusual shape, you must follow this method:
- Apply a pattern to the source material (disk). If there are no artistic skills, you can use a ready-made stencil for these purposes. It must be attached to the base and carefully outlined. The main thing is to make the right pattern, otherwise the watch will turn out to be ugly in the end.
- Cut the vinyl record with a drill or hand jigsaw along the marked lines. This step must be done carefully, as there is a high probability of accidentally damaging parts of the source material that were not marked during the pattern.
- Draw numbers on the plate with a pencil, which then need to be cut out with a drill along the contour. The result is a dial.
- Sand with a file or sandpaper for uneven edges.
- Fix the clockwork.
When performing the described work, do not apply excessive force. It is desirable to carry out all stages on a stable surface.
Decoupage records for watches
This method is the best option for creating a product that will complement the interior of the house. As a result, it will not even be visible what material it is made of. Before making a wall clock from vinyl records, you need to prepare the following items:
- napkins, glue and decoupage paints;
- brush;
- miniature scissors;
- clockwork.
For the manufacture of the product you needfollow the following step by step instructions:
- Coat the record with white paint to get a good base coat. The vinyl surface is easy to paint, but the coating must be uniform, so it is advisable to repeat this step several times.
- Paint the record with a water-based varnish to create decorative cracks.
- Wait a few hours for the paint to dry completely.
- Decorate the prepared surface with special napkins, on which various patterns or images can be depicted. In addition, the product can be decorated with small items (for example, artificial flowers and coffee beans). To fix the jewelry, you need to process the painted coating with a small layer of decoupage glue. The main thing is to glue the edges of the patterns on the watch from the plate with your own hands.
- Install the clock mechanism and paint the clock face using a brush and paints.
Conclusion
Summing up, we can say that making a clock from a record with your own hands is an easy task. However, it is recommended to practice on thin plywood first, as vinyl is a fragile material. Nevertheless, thanks to the information provided in this article, everyone will be able to independently make this simple and necessary product. In addition, it is not necessary to buy a watch mechanism: if there is an unnecessary watch, the part can be removed from them.
