The classic and most commonly used window decoration with textiles involves the presence of a light, translucent tulle curtain at the window and a curtain made of heavier material in front. When using this option, the window and the room take on a very clear look. The double curtain rod in this case allows the curtains to perform their functional tasks while maintaining a beautiful view.
Important preparatory steps to follow when installing curtain rods
Most experts will say that curtain rod holders should be installed at least 10 cm above the window opening and at least 5-7 cm from the side of the window. This helps the window look larger than it actually is. Many will agree that the higher you hang the curtains, the more spacious the room will be.
Once the general installation parameters are determined, the next step is to mark the exact location where they will be located. It is worth considering that if the length of the cornice is more than 2.5 m, it is mounted on three holders - twoalong the edges and one in the middle of the span. Site marking is critical and it is important to do so clearly and correctly. Unevenly installed cornices or incorrectly chosen proportions will spoil the whole view of the window and, accordingly, the room.
Installing double curtain rods
When the labels are set, the next step is installation. Depending on what the walls in the house are made of, use the appropriate tools and accessories - wall anchors or drywall screws. If the jumper above the window is reinforced concrete, then the middle holder should be installed first - it may happen that the drill rests against the reinforcement, and then it will be necessary to make holes higher or lower, and install the extreme nodes already at its level. Monitor the level during installation to make sure everything goes exactly as planned.
Holders in place. Now it's time to hang the curtains. Work begins with the placement of curtains that will hang closer to the wall or window. If a double curtain rod comes with two rods of different thicknesses, remember that the thinner rod is always designed for the lighter curtain weight and closer to the wall or window.
After the thinner curtains are hung, switch your attention to the heavier ones. Once the whole set of curtains is fixed, parts such as curtain rod end caps should be installed.
Job done. You can enjoy a wonderful result.
