The new iron pleases its owners with cleanliness and brilliance. Unfortunately, this doesn't last long. It is enough to choose the wrong temperature while ironing a particular thing to form carbon deposits. Pouring water from the tap leads to the formation of scale. How to clean the iron, return it to its original beauty? The methods described in the article will help to cope with this task.
How to clean a burnt iron at home
What ways are there? How to clean the iron from burn at home? Gentle tools are listed below:
- s alt;
- paraffin candle;
- table vinegar;
- hydrogen peroxide;
- baking soda;
- nail polish remover;
- toothpaste;
- pencil for iron cleaning.
We must not forget that Teflon or ceramic soles must not be rubbed with abrasives. Never use sharp objects, such as a knife, for this purpose. It is so easy to scratch the sole, which will lead to improper operation of the device. It is better to stop at one of the methods that are described in detail below.
S alt
How to clean the iron with s alt? In addition, the product will need a paper sheet. S alt is poured on it in an even layer. Then you should turn on the device, let it warm up. A hot iron must be driven over the paper surface until the blackness comes off. If necessary, the procedure can be repeated several times.
Paraffin candle
An ordinary paraffin candle will also help to cope with the burn. This product must be wrapped with cotton cloth. Then you need to rub the hot sole of the device in a circular motion.
Don't forget that the candle will melt in the process. To protect furniture and floors from paraffin wax, it is necessary to hold the iron over a layer of newspapers or a pallet. After getting rid of the burnt on the device, carefully collect the remains of the melted candle and dirt.
This method is not suitable if the iron has steam holes, a relief work surface. Do not allow paraffin to enter the recesses. Otherwise, you can hopelessly ruin things during subsequent ironing.
Hydrogen peroxide
How to clean the iron from burn? Hydrogen peroxide will help solve this problem. In a three percent solution, moisten a piece of cloth or a cotton swab. Then you can start cleaning the device. Dark spots from the surface must be rubbed carefully and with effort. The peroxide will dissolve the plaque, making it easier to remove.
Table vinegar
Howclean the soleplate? To do this, you can use table vinegar. When dealing with old stains, this product should be mixed in equal proportions with ammonia. The sole of the device is wiped with a swab dipped in the resulting solution. The iron must remain cold during processing.
If the burn remains, you can cover the working surface of the appliance with a cloth soaked in vinegar. A few hours will be enough for the plaque to soften. Residual dirt is removed with a soft brush or sponge.
Baking soda
Baking soda also works great when it comes to removing a burnt iron. It is necessary to dissolve a few tablespoons of the product in a glass of water. Further, a piece of matter is wetted in the resulting solution, with the help of which the cold surface of the device is processed. A damp sponge will help to rid the iron of streaks at the end of work.
Nail polish remover
How to clean the iron at home? Nail polish remover will also help with this task. This method is effective if a piece of polyethylene is stuck to the sole of the appliance. When processing the surface of the iron, it is important not to touch the plastic parts. Nail polish remover contains substances that pose a threat to this material.
Toothpaste
How to clean the iron from the fabric? Ordinary toothpaste also shows good results. It must be applied to the sole of the device, after which the ironturns on. It is necessary to iron the unnecessary fabric until all the toothpaste is removed. You can also use the steam function. This ensures that the paste does not get into the steam outlet.
Iron cleaning pen
How to clean the iron from burnt fabric? This is easy to do with a special pencil, which can be purchased in the department of household chemicals and hardware stores. Typhoon, Diaz, Cinderella are the most popular prescription companies.
- The appliance is placed on a flat surface, such as an ironing board.
- The iron must be turned on and heated to a temperature of 130 degrees (approximately 4-6 position). Then it is unplugged.
- Next, you need to draw a pencil along the sole, focusing on the affected areas. You don't need to press hard, a light pressure is enough. The substance will melt on contact with a hot surface, as it should.
- Then, use a cotton rag to remove the separated burn.
Before operation, you must carefully read the instructions. There is information on what surfaces the pencil can be used on.
Alternative ways
How to clean a burnt iron. To do this, you can use ordinary laundry soap. You need to warm up the device, and then rub the sole with this product. After the surface has completely cooled, soap residues are removed with a damp cloth. It should be remembered that this methodeffective only in the fight against fresh pollution.
Cold soleplate can be treated with paint thinner. The best way to apply it is with a cotton pad. You can also use a glass cleaner. It must be spread on the sole of the device, wait a few minutes, and then treat the surface with a microfiber cloth.
How to prevent burnout
How to make it so that forever forget about such a problem as a burn? To do this, just follow the recommendations below.
- Each type of fabric must be ironed at the right temperature for it. The recommendations on the product label will help you choose the right one.
- Delicate items such as wool are best ironed through wet gauze.
- The fabric should not be stretched while ironing. Clothes should be placed on the ironing board in a natural position.
- Dark fabrics should only be ironed inside out.
- Items with stains should not be ironed. They need to be withdrawn first.
- The work surface of the appliance should be cleaned after each use. It is most comfortable and safest to do this with a soft cloth.
How to get rid of scale
Scorching is far from the only problem iron owners face. How to clean the iron from scale at home? If the appliance leaves red spots on things, the steam function does not work correctly, then it's time to deal with this problem. Quickly and effectively eliminate scale will helpmethods as described below.
Self-cleaning function
Many modern irons are equipped with a very useful self-cleaning function. How to use it correctly? The algorithm of actions is given below.
- The tank must be filled with the maximum amount of water allowed.
- Next, the maximum value of the temperature controller is set.
- The iron should heat up, then cool down, then heat up again.
- The appliance should be tilted over a sink or bowl.
- To remove scale from the steam holes on the soleplate, use the self-cleaning button.
It is important to thoroughly rinse the tank with clean water after finishing work. It is best to repeat this action several times. Then you need to dry the device.
Citric acid
How to clean the iron from scale at home? Citric acid will also help to cope with this task. Approximately 20-30 grams of the product must be diluted in a glass of water. The resulting solution is poured into the tank, after which the device heats up to a maximum. Next, you need to shake the iron several times and press the steam release button.
We must not forget that the drink will come out with the steam in dark splashes. Therefore, the actions described above are best carried out over a container or sink. At the end of the work, the tank must be cleaned with water. The remaining dirt from the soleplate of the iron is removed with a soft cloth.
Mineral carbonatedwater
It is known that such drinks contain acids, due to which it is easy to dissolve the sediment inside the iron. It is necessary to pour mineral water into the tank. Then everything is done in the same way as in the case of citric acid.
