Security and fire control panel "S2000M": description, specifications and reviews

Table of contents:

Security and fire control panel "S2000M": description, specifications and reviews
Security and fire control panel "S2000M": description, specifications and reviews

Video: Security and fire control panel "S2000M": description, specifications and reviews

Video: Security and fire control panel
Video: Security and Fire Alarm Systems Installer Career Video 2024, March
Anonim

For timely detection and warning of a fire, fire alarms are installed in a certain area. Signaling is a complex set of hardware and software. One of the elements of such a combination is the S2000M security and fire control and management panel. The remote control can be integrated into the Orion security system. In addition to the control panel, the system includes 116 more devices and 33 software products. The system has three levels of work construction: lower, middle and high. At the middle level there are control and management panels that provide the implementation of network interaction, event indication and automation control.

security fire control panel s2000m
security fire control panel s2000m

General Description

The S2000M control panel is an improved successor of the S2000, retaining all the previous features and acquiring new ones. According to numerous reviewsfor users, the S2000-M control and management console is quite easy to use and effectively integrates the functioning of all equipment that is connected to it. The device consumes in normal mode from 10 to 28.4 V of voltage.

The console has a modern look, which allows you to use it as efficiently and comfortably as possible. The presence of a hinged control, a keypad and a liquid crystal display with up to 16 characters is an ascetic plus in its accessibility and ease of operation.

Also, the remote control is equipped with light indicators for the notification modes "Fire", "Alarm", "Fault", "Start", "Disabled", Start Delay", Start Cancel", "Automatic Disabled".

The compact body is small (140 x 114 x 25 mm) and weighs about 300 grams. Remote control is carried out using radio frequency channels.

control panel for security firefighters s2000m
control panel for security firefighters s2000m

Additional remote control options

In the S2000M security and fire control and control panel, in order to use it at very large protection facilities, manufacturers have increased the number of sections and alarm loops, the number of users with a personal access password. The display of system messages on the LCD can be stored in the archive buffer, which has an independent power supply, and later viewed. For the convenience of working with messages, it is possible to set a text description of sections and users directly. Names maybe up to 16 characters long.

The name for each saved alarm loop can be used from 32 custom name change scenarios. Each such scenario has the right to set text names and display types for four different messages on the device alarm loop.

with 2000 m control and management panel
with 2000 m control and management panel

Electronic capabilities of S2000M

Available is the option of arming (or disarming) by means of a pin code on the S2000M security and fire control and control panel itself, using special keyboards, Touch Memory keys or Proximity profile cards from devices that have an input for connecting reader.

More than 30 programs are available, which have a built-in option for auto-control of the outputs of control panels, starting and relay equipment.

There is an additional possibility to connect a printer or a personal computer with the appropriate software for logging events, status of partitions and alarm loops.

The ability to transmit information via GSM cellular channels by means of the UO-4S notification transmission system, S2000-PP protocol converter is also provided.

Configuration of the S2000M security and fire control panel is configured using the software from the Orion Pro AWS package or the pprog.exe service utility with version 2.0 or higher.

control panel
control panel

Control panel technical data

The security and fire control panel is characterized by suchparameters:

  • Voltage - consumption in standby mode: 60 mA at 12 V, 35 mA at 24 V; in alarm mode: 80 mA and 45 mA respectively.
  • The watch is powered by a CR 2032 lithium cell with a voltage of 3 V, battery life is more than 5 years.
  • The length of the RS-485 communication line is no more than 3 km.
  • The number of address blocks connected to the RS-485 interface does not exceed 127.
  • The length of the RS-232 communication line - does not exceed 20 m.
  • The number of alarm loops, control circuits, addressable detectors and other controlled elements - no more than 2048.
  • Number of address block relays - no more than 256.
  • Set of groups of elements - no more than 511, groups of sections - up to 128.
  • The number of information notices in the offline log is about 8000. If the limit is exceeded, new messages are written in place of the last one in the order they were received.
  • The number of registered users is no more than 2047. Of these, the number of keys with administrative rights is 1, the number of user codes is 2046. The number of access levels is 255, including 252 with custom rights.
  • The length of text names, zones and users is 16 characters.

Scope of application

The S2000M fire and security monitoring and control panel functions as efficiently as possible in retail and warehouse premises, hospitals, work offices, entertainment centers, catering facilities (restaurants, cafes), residential buildings and apartments.

Fire stationcombines a lot of specialized equipment in the information sphere to create a common control center. At the same time, all incoming data is systematized and controlled.

The remote control itself must be located in a protected area, and must also be protected from the negative effects of atmospheric influences and mechanical damage.

The device is designed for continuous round-the-clock operation. Operating functional parameters are limited by ambient temperature from -10 to +55 degrees Celsius, relative humidity up to 93% in the absence of wet condensate.

projects using the control panel
projects using the control panel

Projects using S2000M

The S2000M device, as part of an automatic fire alarm system (APS), has a wide range of integration into buildings of various configurations. Projects using the control and management console are distinguished by thoughtful security and implementation efficiency.

In one of the projects of the medical center, a fire alarm system, a warning system and a medical center control system were introduced. The protected area was 324.02 m2. For visual control of notifications, the RS-485 interface of the S2000M security console was used.

In the project of the central distribution warehouse of the Moscow region, the fire system with the presence of the S2000M console was integrated into the ready-made alarm system of the warehouse. Escape routes, arrangement of smoke exhaust valves and other elements were developed taking into account the introduction of this security and fireremote.

Recommended: