To sharpen knives, many people turn to workshops. However, special machines are sold in stores for this purpose. They are of different types and have their own characteristics. According to the drive, tape and disk devices are distinguished. Many models are made in closed cases and are absolutely safe. It should also be noted that a good machine costs around 20 thousand rubles.
How to choose a model yourself?
Many experts advise giving preference to disk devices. First of all, they allow you to quickly gain momentum. Parts in this case wear out slowly. The design must be provided with a closed case.
It is also important to pay attention to the diameter of the saw blade. On average, it is 13 cm. If we talk about tape models, then they are produced with low power. They usually have an open design. A high-quality belt grinder for knives will cost around 12 thousand rubles.
Reviews about "Jet-10"
Many buyers give positive feedback about this machine. Its rated power is 3 kW, and it consumes not so much electricity. Directly the engine is installed collector type. The guides in the device are located behind the pulley. According to the owners, the connection cable is long. The plate in the device is made of steel. The lower block in this case is mounted on a special leg.
To adjust the speed of the disk there is a special regulator. The owners also note the simple design of the device. If necessary, you can clean the plate yourself. The casing in this machine is installed from rubber. The noise level of the presented model does not exceed 30 dB. It allows you to use knives up to 5 mm thick. It has a very high grinding speed. The indicated grinding machine costs (market price) about 21 thousand rubles.
Parameters of the "Jet-12" model
This model is equipped with a powerful collector motor. On average, the disk makes more than 2 thousand revolutions per minute. The lower block in the presented modification is made of steel. The legs are installed with rubberized gaskets. The disk itself rotates on a special shaft. The maximum thickness of the knife is allowed at 5.5 mm. You can buy this machine in the store for 18 thousand rubles.
What they say about the Touch Pro machine
The Touch Pro grinder stands out with its sturdy frame. In this case, the stand is made of metal. For large knives, this model is ideal. Also importantnote that the disk used is 13 cm in diameter. The power consumption of the model is negligible. If necessary, the speed of the disk can be adjusted. Guides in the specified model are in a horizontal position.
For safe use, the Ganzo Touch Pro grinder has a guard. The grinding surface of the model is made with a special coating. The shield in the device wears out very rarely. It is also important to mention the compact dimensions of the machine. If you want to move it to a new place is not difficult. A spare wheel for the grinder can be purchased at the service center. This model costs only 13 thousand rubles.
Opinion about "Evrotek-2001"
These grinders are getting good reviews from consumers. However, they also have downsides. First of all, it is important to note that knives can be used up to 4 mm thick. In this case, the disk is installed with a small diameter. The tape in the presented device has a thickness of 2.1 mm. The plate in the machine is made of aluminum. For convenience of use of the tool there is a roller mechanism. The guides of the model are in a vertical position. They can be cleaned if desired. The model weighs a little, so it can always be moved. There is no fence in this case. It is also important to note that the machine does not have a quill. According to the owners, the lunette sometimes breaks. However, it is important to mention the strong racks. You can buy this machine in our time for 23 thousand rubles.
FDB TS630 DMX specifications
Specified knife sharpenerfeatures durable discs. The guides of the model are on the sides. You can remove them if you wish. It is also important to note the simple operation. In this case, the speed of the disks can be adjusted. In general, the lower unit is able to withstand heavy loads.
If you believe the owners, then the machine has no problems with stability. For convenience of use of the tool there is a special corner. In this case, the fence is not provided. Pulleys are used to fix the discs. You can buy this machine in the store for 18 thousand rubles.
FDB TS750 DMX reviews
This grinding and grinding machine was well appreciated by many for its compactness. In total, the model uses two guides. The body itself is made with a protective stand. Rollers are not provided for this device. If you believe the buyers, then cleaning the tool is simple. The power of this machine is 3.3 kW. It is able to work from a network with a voltage of 220 V. The maximum thickness of the knife is 4.5 mm. The flywheel is missing in this case. The fixation of the stop is carried out through the upper beam. You can find the specified machine in the store at a price of 15 thousand rubles.
FDB TS940 DMX model parameters
This grinder is most suitable for home use. It's pretty simple to use. Its body is not high, and the machine weighs only 13 kg. This model does not have a guard. In a minute, the disk is capable of making about 2 thousand revolutions. The guides can be cleaned if necessary.yourself.
Directly, the shaft in the device is mounted on rollers. The casing is not used in it. According to the owners, the machine works quite quietly. However, the model still has its downsides. First of all, this concerns the rapid wear of the flange. Some consumers complain about the breakage of the quill. In this case, the caliper needs to be lubricated periodically. You can buy this machine for 22 thousand rubles.
What they say about the machine "Corvette-470"
This machine is chosen by many for its versatility. It allows you to handle knives of different thicknesses. It is also important to mention the large diameter of the disk. All this makes it possible to sharpen the edge of the knife without any problems. If you believe the owners, then the shaking of the device is small. However, the noise of the machine annoys many. The sound level of the presented model is at around 45 dB.
The flywheels in the device are attached behind the shaft. The body of the model is not used wide. If desired, you can rearrange the device. The shields of this model can be cleaned independently. It is also important to mention the strength of the guides. The flange in the device is made of aluminum. You can buy this machine in the store for only 18 thousand rubles.
Opinion about "Corvette-500"
This machine is specially designed for home use. In addition to knives, it can grind various metal objects. Its power is low, but the model has many advantages. First of all, buyers note the strength of the structure. The caliper in the device is made of steel. The legs of the model are included in the kit with rubberizedgaskets.
If desired, you can adjust the speed of the disk. The flange of the model is made of aluminum. A cover is used to protect the device. Due to it, the noise level does not exceed 33 dB. The shield in this case is not installed. Also, the specified machine is not equipped with a protective fence. Thus, when using it, you need to be extremely careful. You can buy this model today for 23 thousand rubles.
Characteristics of the machine "Corvette-510"
The specified machine is equipped with a 14.5 cm disk. The top plate of this device is attached to a spring. The corner is made of aluminum alloy. You can clean it yourself if you wish. According to customer reviews, this machine breaks down very rarely. However, it is important to note its low power. It is not suitable for long knives. The maximum thickness of the product is allowed at the level of 3.5 cm. The protective cover in the device allows you to work safely.
It is also important to mention the compact design. The support is metal, and is able to withstand heavy loads. The disc speed is easily adjustable. It is also necessary to mention the stability of the tool. The frame of the model is made of steel. You can buy the specified machine for 22 thousand rubles.
Reviews about Profi Cook 1090
This machine (grinding) is in great demand nowadays. In this case, the plate is installed with a roller mechanism. The disk itself is used with a diameter of 13.6 cm. The device does not have a transmission system. Separately, it is important to mention the quality of the case. It is made with an anti-vibration system. If desired, the bed can always be adjusted.
The disc in the device is durable and sharpens knives very well. At the same time, the user can change the position angle of the product. The guides in the machine are located under the plate and are in a vertical position. If you believe the owners, then the machine can last a long time. You can buy it for 17 thousand rubles.
Profi Cook 2030 model parameters
This machine (grinding) is very rarely used in everyday life. First of all, it is important to note that it weighs as much as 22 kg, so it is problematic to rearrange it on your own. Also noteworthy is the width of the structure. The bed in the product is made of aluminum. The flange is located directly behind the clamping spring. If you believe the owners, then cleaning the specified device is easy. It is also important to mention the ease of operation. The device does not have a roller mechanism. The rotation speed of the disk can be adjusted. The user can buy this machine for 15 thousand rubles.
What they say about the Profi Cook 1055
This machine (grinding) gets positive feedback from buyers. If we talk about the parameters, then the power of the device is 3 kW. The disk is set to 13 cm. A casing is used to protect the system. The volume level of the device does not exceed 20 dB. The flange of the model is not wide. DirectlyThe plate is made of aluminum and does not weigh much. Flywheels are not used on the machine. The engine is located at the bottom of the structure.
The roller mechanism is located just below the plate. Knives on this machine can be processed up to 4.5 mm thick. It has a high grinding speed. It is also important to mention the long power cable. Thus, the machine can be installed anywhere. The model does not have an anti-vibration system. In our time, such a machine (grinding) costs about 19 thousand rubles.
