Before proceeding with the analysis of plastic corners, familiarize yourself with the species diversity of borders and the scope of products.
The intended purpose of the material is to prevent water seepage and moisture ingress between the wall and the bathroom, which, in turn, protects the plane from damage by fungi and mold.
There are a variety of corners on the market, made from a variety of materials. Border Options:
- ceramic;
- plastic;
- tape.
Each of the presented species is distinguished by its features and has some characteristics that are unique to it. Before dwelling on one of the options, read the short help for each type of corner.
Plastic bath corner
Of the wide range on the market, this kind of product is considered one of the most economical ways to create a hermetic protective layer. This option is easy to install and is attached to the surface with liquid nails or silicone glue. Can be attachedboth under the tile and on it.
Low pricing does not affect the quality and range of products. You can easily choose a comfortable texture and a suitable color, which is important in the stylistic design of a bathroom, kitchen or any other room.
Don't count on plastic skirting boards to last. From frequent temperature changes and under the influence of moisture, they can crack, therefore they must be periodically replaced. Plastic products do not fully comply with the requirements, as they are not one hundred percent sealed and slightly permeable to moisture.
Installing such a design is simple even for a person who does not have the skills to work with such materials.
Actually, these advantages, combined with the price, attract buyers of plastic corners.
Plastic border options
The length of the curb is up to 2.5 m, but one skirting board is not enough to completely process the gap, therefore it is better to buy a skirting board in the amount of 2 profiles per bathroom, depending on the size, sometimes more material is required. The width of the products is 25 mm or 50 mm, and the choice of this parameter depends on the size of the gap. These are the standard sizes of plastic corners.
Ribbon borders
These are self-adhesive polyethylene tapes that not only do an excellent job of decorative functions, but also do not allow moisture to break through the tub or shower. Manufacturers focusing oncustomer request, try to make skirting boards with different widths.
Installation of such products is easy, and for additional reliability can be attached with sealant.
Ceramic skirting boards
Durability and reliability - what attracts the buyer in ceramics. This is the best option for a tiled room and using a ceramic instead of a plastic corner makes perfect sense.
Today, 90% of manufacturers make special corner pieces that make the installation process easier and faster.
If you do not have the skills of wall cladding with tiled products, it is better not to take on this work and refuse to paste over the area with ceramic borders in favor of another, simplified option. Leave this matter to the masters.
Ten years ago, it was unrealistic to get a ceramic skirting board for the bathroom, so the craftsmen were engaged in the manufacture of this kind of products on their own, and just after doing the work, they enjoyed a worthy and spectacular view of the room.
Other types of corners
In addition to plastic corners and those described above, there are also products belonging to a more expensive category: granite or marble skirting boards. Such products are distinguished by a long service life and give the room a solid look.
When installing natural stone parts, follow the re-creation of a unified interior style in the bathroom or kitchen. For example, purchase a marble sink or bath bowl, trim a kitchen backsplashnatural stone.
The choice of one or another type of bath corner depends on the preferences and capabilities of the owner.
Features of plastic corners and why you should give them preference
As already mentioned, plastic borders will not completely protect against moisture, but this is not the main task of the product. The plinth only acts as an outer material that hides the sealant layer, protecting it from light and direct water.
Interesting! Did you know that 80% of the time, a full silicone can is used to install bathtub corners?
Plastic tile corners do not require the purchase of additional items. Immediately after purchase, they can be installed on a prepared surface. Please note that the surface must be perfectly flat, otherwise water will flow under the curb.
Sometimes the font for water procedures does not fit snugly against the wall and water constantly pours out through the gap, forming a favorable moist environment for the growth of mold and fungus under the bath or shower. To avoid such a nuance, seal the joint with sealant, and lay the plinth on top.
Another argument of a larger nature, caused by leaks, is the damaged ceiling of the neighbors, which entails a lot of money, because everything will have to be repaired out of pocket.
To avoid such troubles, mount curbs, for example, plastic wall corners. Please note that the installation of self-adhesive skirting boards leads to the peeling off of the adhesive in particularly mobile areas, as a result of which waterspills on the floor.
How to choose the glue for the baseboard in the bathroom?
It should be a composition that transmits light, a maximum transparent and viscous substance. Taking a mixture of a different shade, you risk spoiling the appearance of the walls or bath, as the glue comes out after gluing the corner on top. Transparent compositions after drying are practically invisible.
When choosing a material, consider the features of the surface of the bath bowl. If it is made of acrylic, then it is better to take a narrow-spectrum glue - for plastics. Metal surfaces will require the purchase of a different type of substance.
Glue particles are easily removed after the paste dries. You can use a strong solvent or mechanically clean. In cases where such actions are contraindicated in relation to the bath, for example, it is made of PVC, the residues are removed immediately after embedding, without waiting for the glue to harden. To do this, use a cloth or napkin dipped in white spirit.
Features of mounting a tiled border
To install a plastic corner on a corner or wall, prepare the necessary inventory:
- spatulas (rubber and metal);
- knife;
- home hair dryer to dry the surface;
- roulette;
- hacksaw;
- mounting gun;
- mounting tape.
Before you stock up on all the necessary materials and tools,figure out how and how to glue the plastic corner to the tiled floor. You can solve the problem by analyzing the component composition and additionally studying the instructions for the adhesive mixtures present on store shelves.
Scheme for mounting the corner on the surface
Installation instructions consist of simple steps:
- Dismantle the old baseboard that needs to be replaced and clean the surface: remove the resulting rot and degrease the coating.
- Clean off the dirt with a knife. Then, taking a sponge soaked in water with chlorine, rinse the surface, dry it with a hair dryer.
- Measure the area where the baseboard needs to be replaced with a tape measure.
- Adjust the skirting board to the required parameters and cut at an angle of 45 on both sideso.
- Apply the prepared pieces to the installation site and make sure they lie flat.
- Remove the section, leaving only the glued tape.
- Apply the glue in a thin layer starting from the corner. To do this, gently press the handle of the gun.
- Place the baseboard over the tub and lightly press against the base, tile or wall. Allow the surfaces to adhere tightly for 20 minutes while the foam sets.
- Full tightness is achieved by filling the gaps with a white sealant based on silicone, using a mounting gun for such purposes.
- In order not to stain the border and the wall, stepping back 2 mm from the edges, paste over the surfaces with mounting tape. Take a spatula and, bending it slightly, place it under the plastic, squeezing the silicone out of the tube. well donesurfaces until they are completely filled with substance.
- Squeezing out the composition, move along the baseboard, filling the seam. Level the resulting layer with a rubber spatula.
- Do the bottom side of the corner in the same way, where it connects to the bathroom.
- Pay special attention to the corner joints and fill them with sealant with extreme care.
The installation of a plastic decorative corner made according to a given scheme will allow the structure to serve for a long time, protecting it from moisture penetration behind plumbing fixtures.
Now you know what to look for and which bathroom skirting board to choose. Pay special attention to the products of firms that have proven themselves in the building materials market. Then you will not have to doubt the reliability and quality of the installation.
