Paddle-type agitators are actively used in the industrial sector. The rotor for them is most often selected as a two-phase type. The power of the device is very different. When choosing a modification, it is important to pay attention to the power, as well as the frequency of the agitator.
Many models of lining are used in a small thickness. The vibration level of such modifications is extremely low. The user is able to buy a high-quality paddle-type mixer at a price of 30 thousand rubles.
The principle of operation of devices
The principle of operation of paddle-type agitators is based on the rotation of the output shaft. This effect is achieved through the use of motors. Typically, they are used at 4 kW and operate at 44 Hz. Security systems are available in different classes. There are keys to stabilize the shaft. Clamps are installed at the top of the structures. If we consider the mixers of the closed type, then they use covers. Containers are most often selected in small sizes. However, in this case, much depends on the power of the device.
Home use
In everyday life, mixers of this series can be used when repairing an apartment. With the closed model, the user is able toeasy to mix cement. Also, modifications are allowed to be used as a mixer. In cooking, devices are also successfully used. They are good for making creams.
Industrial applications
Agitators (bladed) are quite common on construction sites. Also, devices can be seen at cosmetic factories. They are good for mixing creams. Powerful modifications are used in oil plants.
Parameters of SB-146-A series devices
This propeller agitator has many advantages. First of all, experts note a high-quality gearbox. The blades of the modification are used quite wide. Some experts are burning that the modification is great for preparing solutions. At the same time, the permissible overload level is at around 5 A. The mixer protection system is used by the PK23 series. The shaft of the modification is set to 5.3 cm. The motor for the device is selected as a three-phase type. His anchor is installed with a lining. The rotation speed of the agitator is controlled by the module.
The maximum vibration level of the agitator is only 5 N. In this case, the manufacturer does not provide a thrust bearing. Some experts say that the modification can be used in the cosmetic field. However, the rotor does not withstand large overloads. It is also worth noting that the stirrer is produced with a channel modulator. It does not have a soft start option. The user is able to purchase a stirrer of this series at a price of at least 45 thousand rubles.
Features of SB-148-A series mixers
This stirrer is ideal for beauty businesses. If you believe the reviews of experts, then the gearbox is of high quality. The allowable overload parameter is at the level of 5 N. The PK55 protection system is available in this case. Some experts point to a small shaft. The frequency is at least 2300 rpm. The blades are shaped like petals.
The device is not suitable for thick creams. The thrust bearing in this case is available with a blocker. The gear unit is standard mounted with a gear mechanism. Only one key is used to protect the shaft. The user can purchase this paddle-type agitator at a price of at least 40 thousand rubles.
Advantages and disadvantages of SB-150-A mixers
This mixing device is very popular. It is great for home use. If you believe the opinion of experts, then the device is allowed to be used in the industrial field. The thrust bearing in this case is designed for large overloads. The gearbox itself operates at a voltage of 220 V. The frequency of the device is at the level of 3200 revolutions per minute.
The device is not suitable for thick creams. The unique design of the blades allows you to whip the cream. The modification has a blocker with a dipole adapter. The limit load parameter is at the level of 5 N. The P40 protection system in this case is not provided by the manufacturer. The working temperature of this mixer (blade) is at the level of 55 degrees. Forkneading oils the device is used quite often. In this case, the rotor has a two-pin type and operates at a voltage of 230 watts. The cooling system is used in the KE20 series. The shaft in this case is used by 3.3 cm. If you believe the opinions of experts, then the conductivity of the mixer is quite high. At the same time, the case is very easy to clean and very easy to transport. A wide pad is used above the shaft, which protects the body. Spare parts can be purchased from the service center. The blades of the modification are quite narrow. The user is able to buy the model at a price of 34 thousand rubles.
Parameters of SGU-400 series devices
The specified paddle type agitator is produced with only one gearbox. If you believe the opinions of experts, then the shaft is used by 3.4 cm. Also, experts say that the device weighs extremely little. The modification power is 5 kW. The energy consumption of the stirrer is no more than 60 watts. The P40 protection system is absent in this case. Some buyers note a large number of modes in the modification.
Modulator for control selected dipole type. The key on this mixer is extremely rare. If we talk about the shortcomings, it is important to note that the model is not able to work with oils. In this case, the gear unit cannot withstand large overloads. The operating temperature of the modification is at 30 degrees. The length of the blade is only 4.5 cm. In conditions of high humidity, the mixer must not be operated. Buy modificationthe user is capable at a price of 45 thousand rubles.
Features of SGU-430 series mixers
The vertical agitators shown are heavy duty. The container they have is quite voluminous. If you believe the opinions of experts, then this mixer is not afraid of overloads from the network. The operating temperature of the bladed device is 45 degrees. The manufacturer installed the rotor with a three-pin type, and the expander is used with a capacitor. Many experts say that the modification is in demand on construction sites for mixing mortars.
However, it is important to note that its performance is not very high. The blade angle is 35 degrees. A special key is used to protect the equipment shaft. The shaft in this case is used by 3.4 cm. It is also worth noting that the modification has a protective cover. In this case, the rotor box is provided without protection. Spare parts for it can be purchased at the service center. The blocker is standardly used with an adapter. This mixer starts very smoothly, and stops quickly. You can buy it on the market for only 55 thousand rubles.
Advantages and disadvantages of SGU-440 mixers
This paddle type agitator has many advantages. Experts say that the device is able to work with high viscosity oils. For perfumery, the model fits perfectly. The rotor of the modification is used with a dipole adapter. It is also worth noting that the model is not afraid of overloads.
Blades in the deviceset at a 35 degree angle. In the construction industry, the model is in demand. Many experts point to good conductivity. The blocker in the device is installed with one expander. If you believe the reviews of experts, then the protection system copes well with impulse noise. For kneading creams, the modification is great. The lid is treated with a protective layer against corrosion as standard. The modulator to control the stirrer is of the capacitor type. In total, the model has five modes of operation.
The power consumption parameter is at around 80 watts. She does not have a P30 protection system. Blades break quite rarely. However, the filter wears out often, and it costs a lot. The user is able to purchase a modification of this series in a specialized store for 38 thousand rubles.
Parameters of VMSh-125 series devices
The specified paddle agitator has only one shaft. For repair and preparation of the solution, the device is great. However, it is important to note that the modification has a through-type rotor and the allowable overload parameter is at around 40 A. The model does not have the P30 protection system.
The mixer has an indication block. For the preparation of liquid mixtures, the device is not bad. The expander for the device is selected dipole type. The motor, in turn, uses a three-phase type. The adapter for the modification is of the end type. There are holes for cooling the device. The user is able to buy the device at a price of at leastRUB 44,000
Features of VMSh-126 series agitators
This paddle mixer is used for mixing oils of different densities. If you believe the opinion of experts, then the modification has a rotor with a high-quality blocker. The contactors are working flawlessly. It is also worth noting that the device is in demand in the construction industry. In repairs, modification can be very useful. Buyers claim that the speed of the agitator is quite easy to adjust. In this case, the modulator is used analog type. It starts very smoothly.
The modification does not have a P50 protection system. The maximum stirrer temperature is 45 degrees. The shaft in this case is used by 3.4 cm. In total, the model has two capacitors. The cooling system is used class KE30. Unfortunately, the modification does not have a filtration unit. Many experts say that the model weighs little, and the stand is able to withstand heavy loads. Among the minuses can be noted a high rate of energy consumption. The price for this paddle-type agitator starts from 44 thousand rubles.
Advantages and disadvantages of VMSh-130 mixers
This paddle mixer is made with two condensers. The motor itself is used at 4.4 kW, and its energy consumption is 50 watts. The modification does not have a P40 protection system. If you believe the reviews of experts and customers, then the device copes with oils without problems. This cools the motor very quickly. The blades in the device are at an angle of 45degrees.
The model is not afraid of large overloads from the network. In the construction industry, this paddle type mixer is very popular. She has a dipole blocker installed. The shaft is designed for overloads of 3.2 N. It rarely stops during operation. The price for this paddle-type agitator starts from 38 thousand rubles.
Parameters of RX-850-V series
This paddle agitator is made with contact rotor. If you believe the experts, then its conductivity is quite high. The device is good for mixing oils. The P30 protection system is not supported by the modification. The blades of the model are at an angle of 30 degrees. It is also worth noting that the model stands out for its compact size. The gearbox in the device is used as standard with a contactor. This paddle type agitator starts very smoothly. The manufacturer provides a cooling system for the K20 series. The modification has a dilator of a channel type.
Modulator is used only one. In total, the modification supports only three modes of operation. With network overloads, the agitator of this series copes well. The maximum working temperature of the model is 45 degrees. For kneading creams, the device is not the best way. The shaft in this case is installed with a diameter of 3.3 cm. Its protective key is made of rubber. This propeller mixer costs about 45 thousand rubles.