Cleaning the carpet itself can be difficult and tedious, and when wax stains appear on it, it can leave the owner in a stupor. But in fact, there are several ways to remove such stains quickly and effectively.
Cold wax removal
Exposure to cold is one of the main ways to remove wax from carpet. For freezing, ice or any other cold object is suitable. Before removing the wax from the carpet, the ice must first be wrapped in a film, and then placed on the damaged area. Wait until the wax hardens (it should not just harden, but harden), then remove it mechanically. This should be done as carefully as possible so as not to damage the carpet itself.
It is also recommended to walk the carpet with a vacuum cleaner to remove the smallest particles of wax. After that, you can use any cleaning agent to remove the grease stain that may have remained on the pile.
Hightemperature vs wax
You can remove wax from the carpet using the ability of this substance to melt at high temperature. There are several ways to clean carpet wax by using high heat:
- Remove the wax with a spatula or the blunt side of a knife. Put thick cardboard on its remains, and then iron this area with a hot iron. Wax under the influence of high temperature will melt and be printed on cardboard. Paper towels can also be used instead of cardboard. In this case, the iron should not be hot, but warm, and during operation, the towel must be changed several times. The steam function must be turned off on the iron. You can turn it on only after removing the wax to remove all remaining dirt (you can iron the carpet through a clean cloth).
- If there is no way to use an iron, and there are no other thoughts on how to remove wax from the carpet yourself, then you can use a hairdryer or a very hot spoon. In this case, cleaning will be safer, since it is possible to dose hot air flows. Keep the hair dryer at some distance from the pile of the carpet, otherwise the device may overheat.
How to remove wax from a carpet with alcohol?
This method is relevant not so much when removing the wax itself, but when cleaning the carpet from greasy stains that could remain from the candle. After removing the wax residue, the carpet should be allowed to cool or dry (depending on the cleaning method chosen). After that, soak inalcohol cotton swab, which you need to wipe the problem area. Next, dry the carpet using clean paper towels or microfiber cloths.
When removing stains in this way, it is strictly forbidden to pour alcohol directly onto the carpet. This can lead to discoloration of the product or its shedding, but the main problem will not be solved, and the question of how to remove wax from the carpet yourself will remain relevant.
Acetic solution with s alt
This solution is considered a popular solvent, which has a mild, non-aggressive effect. You can use a mixture of vinegar and s alt to remove both wax and paraffin. Knowing exactly how to remove candle wax from the carpet, you can proceed to action:
- First you need to prepare a cleansing paste. To do this, mix table vinegar, s alt and baking soda until a homogeneous paste is obtained. The proportions of the components in it should be the same.
- Apply the resulting product to the contaminated area on the carpet, then leave to dry completely.
- Now, with a soft brush, you need to rub the treated part of the product, trying to remove the applied product (during this period of time, the paste should dissolve the wax or paraffin and absorb them into itself).
Use this product with extreme care on dark carpets as baking soda and vinegar have bleaching properties.
The cardinal way is the use of solvents
Use aggressive wax removal methodsfrom the carpet is possible only if other methods (how to remove wax from the carpet at home from a candle with cold and heat, described at the beginning of the article) did not lead to the desired result, or the pollution was extensive. In such cases, only solvents, such as white spirit, kerosene, acetone or refined gasoline, will be effective. When using them, you need to follow the precautions:
- carpet treatment should be carried out in a well-ventilated area;
- when cleaning, do not forget about personal protective equipment (gloves, respirator, thick clothing);
- before removing the wax from the carpet, it is recommended to test the product on an inconspicuous area of \u200b\u200bthe product, as these solvents are aggressive. They can lead not only to discoloration, but also to more serious damage.
If no negative impact was found, then you can remove the wax with a solvent, following the instructions:
- Moisten a cotton pad.
- Disk dirty area.
- After achieving the desired result, you need to carry out the usual cleaning of the carpet using detergents.
- Carpet to dry and ventilate.
Prevention measures
So that the carpet is not damaged by candle wax, it is recommended to take precautions:
- use high-quality candles, which contain only wax (paraffin), stearic acid (allows you to minimize waste when burning a candle), fragrances and dyes;
- put candles in candlestickswith a large bowl, regularly remove wax residues from them;
- do not put candles near the fan, open window.
It is better to remove wax from the carpet immediately after it appears, since this stain can penetrate deep into the fibers of the product and collect dirt. And then it will not be necessary to invent how to clean the carpet from wax. In addition, removing stubborn stains can cause difficulty and damage to the carpet, which can be costly to repair.
