Not only people with poor eyesight think about how to thread a needle. Anyone can ask this question. It can be either in the thread itself (some of them simply delaminate, which makes it difficult to pass), or in a needle that has an uncomfortable eye.
Who is to blame?
When something doesn't work out, people unwittingly begin to blame someone else for their failure. What can cause problems with threading? Options worth considering:
- Narrow eye of the needle, which, of course, cannot be fixed.
- Insufficient lighting, perhaps that is what makes the whole process difficult, it is worth trying to change the place to a more lit one.
- Poor vision. If a person has vision problems, it will be difficult for him to thread a needle, to simplify the process, you need to wear glasses or use a magnifying glass.
- Shaky hands. This problem also occurs, because after prolonged attempts, the hands get tired and begin to tremble, and this may also be due to disease or age.
- Thread quality. Some of the threads areproperty to delaminate into several parts.
These are the problems most people face. If desired, they can be easily solved using simple methods that will teach you how to thread a needle.
Surrender or fight
What is the best thing to do - solve the existing problem or leave it unattended? Of course, it would be better and more correct to choose the first option. There are several ways to get rid of the previously described problems.
Needed advice on "how to thread a needle":
- to make the thread pass through the eye better, you need to scroll or knead its tip between your fingers, so the thread will become less voluminous, which will facilitate the passage;
- if the thread is stratified, it must be cut; this should not be done evenly, but at an angle so that the tip is pointed and passes more easily;
- you can lubricate the beginning of the thread and the eyelet with vegetable oil, but this is an extreme measure, since you will have to cut the thread in oil and wipe the eye itself;
- use a special tool to thread;
- replace thread or needle;
- ask for help.
It is best to buy needles with a large eye in the future, so that in the future you will not face such a problem, the solution of which takes a lot of effort.
Stunts on the verge of fantasy
The following methods will tell you how to quickly thread a needle. It is worth noting that these methods are really fast in execution, but still require certain skills.
- Needle threader. With this tool, you can easily insert the thread into the eye. First you need to thread the thread into the hole of the device itself, then insert it into the eyelet, and then remove it, leaving only the thread. This method works great, but only if the tool itself can pass into the needle.
- Thread in the palm of your hand. This option will show you how to thread a needle in the palm of your hand. To begin with, you need to lay the thread on your palm, put an eyelet on top. With movements up and down the thread, you need to try to push it through. This method is good for wide ears.
Disconnection. On needles with a double eye, there is usually a special point with which you can divide the thread into two parts, one of which must be cut. The junction should be scrolled between the fingers. Thus, it turns out that the tip of the thread will be thinner and will easily pass into the eye
Each method has its own advantages. You should try everything to understand which one is more effective. It is they who can be used in the future.
What to choose?
How to thread a needle? In order to choose the best method, you need to be guided by your capabilities and the cause of the difficulty in threading the thread. It is best to have a set of needles with different eyes on hand, which will increase the likelihood of success. It will not be superfluous to get a needle threader.
