The bathroom is a special place. It is here that people most often relax and take water treatments. And it is not surprising that the design of the bathroom is always taken more seriously. Today, you can use modern technologies, with the help of which they create really cozy rooms. You can make a self-leveling floor in the bathroom and not only get a practical and wear-resistant floor covering, but also enjoy a unique design.
Seamed floors: what is it?
Self-leveling floors are a liquid, or rather a special mixture, which is poured onto a rough base. When the mixture dries, the result is a pleasant to the touch surface, which is compared to a smooth floor tile.
Mixes that are used to create self-leveling floors have the property of self-levelling. This greatly simplifies the task for those who have not yet had experience in installing such floors. Dodo-it-yourself self-leveling floor in the bathroom is not at all difficult. For success, it is necessary to strictly observe the technology of applying the mixture and carefully prepare the base in advance.
Advantages of self-leveling floors
These floor coverings have many advantages. The first thing that can be said about them is the very high performance characteristics that distinguish the self-leveling floor. In the bathroom, this is especially true: this room has a constantly high level of humidity.
In addition to excellent moisture resistance, this modern floor covering is highly environmentally friendly, has a high level of strength, and is resistant to various mechanical damage or deformation. Also among the advantages stand out antistatic, excellent thermal conductivity characteristics, high resistance to chemical attack. Also, these floors provide very wide possibilities for creating design effects. See what a self-leveling bathroom floor might look like. The photo cannot convey the full depth of the picture - in reality it looks just fantastic.
Make a bulk coating in the bathroom
According to their characteristics, self-leveling coatings are an ideal choice for bathrooms where there is a constantly high level of humidity and various detergents and cleaning agents are used. Also in these rooms should always be the most comfortable temperature. You can create all this with the help of unique self-leveling floors.
Preparing the base for work
Before proceeding with the installation, it is necessary to carefully prepare the subfloor. So, the process of preparatory work includes three stages. At the first stage, the concrete base is thoroughly cleaned of various dirt and dust. Next, the floor is inspected for various defects. If something was found, then the crack or chip must be removed.
The next stage of work is the application of a primer coating in two layers. The primer should be selected based on the base in the bathroom. For weaker floors, mixtures with higher penetrating power are used.
Select materials
In order to pour the self-leveling floor in the bathroom with your own hands, you should purchase a polymer mixture, as well as a top coat. Also, if you plan to do not just floors, but something designer, then design elements are also purchased.
Today, in construction supermarkets, you can easily and inexpensively find various colored polymer compounds for self-leveling floors that will help decorate any bathroom interior. Designers today also create a unique voluminous self-leveling floor for the bathroom. Photos can be seen in the article.
When choosing materials for floor installation, it is very important to purchase mixtures only from reliable manufacturers. This is the only way to buy a real, high-quality product and get a reliable floor as a result. In addition to the correct choice, then it is necessary to study the instructions and prepare the bulk mixture as indicated by the manufacturer. Onlythis way you can get a solution of the desired density, which will be very easy to work with.
Compounds for self-leveling floor
Several products are used for bathroom flooring. These are solutions based on polymers and cement, crushed stone or sand. These compositions are most suitable for creating a quality base base.
In addition to the base, finishing mixtures are also used. It is based on polymer only. For bathrooms, polyurethane or epoxy finishes are best suited. Floors based on these solutions will have maximum wear resistance and excellent decorative characteristics. Take a look at how impressive the self-leveling floor in the bathroom looks. The photo below was taken after a year of floor use. As you can see, there are no scratches on it.
Required tools
To install self-leveling floors, a home master will only need a spatula and a special roller with needles. The spatula will help to evenly apply the mixture over the entire surface of the base, and the roller will help remove air bubbles from the solution.
Filling technology
The first step is to prepare the solution. All components are poured into a pre-prepared container and thoroughly mixed with a mixer or a drill with a stirring nozzle. The result should be a homogeneous solution. Then the resulting thick liquid is poured onto the subfloor and the layer is leveled so that the thickness over the entire area of \u200b\u200bthe room is approximately the same.
It is important to know that floor installation work must be carried out within strict temperature limits. Work is allowed at temperatures from +5 to +20 degrees. There are also requirements for the level of humidity - no more than 60% is allowed. If these important conditions are violated, nothing terrible will happen, but the coating will harden much longer.
If everything is done correctly, the thickness of the layer is the same, then you can finish the work on this. It will take at least 12 hours for the coating to dry completely. However, this is only the base surface. Ahead is the finishing touch. Filling technology is the same.
Everyone can make a self-leveling floor in the bathroom with their own hands. This is a simple floor that requires only a level concrete screed.
It is important that at the moment of drying the coatings limit the flow of fresh air. If this is not done, then over time the floor will simply crack.
About the disadvantages of bulk coating
The first thing that these polymer floors are scolded for is high prices for mixtures. The price is indeed much higher than that of tiles or traditional linoleum. Another disadvantage is that it dries quickly. If some mistake was made during the pouring, there is very, very little time to eliminate it.
That's all the shortcomings. For those who decide to make a self-leveling floor in the bathroom, the feedback on the operation of modern technology is positive. All those who use these floors confirm the high durability and wear resistance.
Decorate self-leveling flooring
These floors have a very wide range of decorating possibilities. Some covers are practically works of art. If the home master has a sense of beauty, then he will definitely be able to give the bathroom a special look. There are several ways to decorate the flooring.
The first method involves overlaying the image on a special film onto the base layer. It is necessary to stick the self-adhesive film on the base very carefully, and then apply the finishing part.
A more advanced owner of a house or apartment uses the services of professional artists who create not just images, but three-dimensional paintings.
You can make a durable and beautiful coating, but at the same time it will be monophonic. Such a self-leveling floor in the bathroom also looks very, very impressive. To do this, a dye is added to the polymer mixture.
So, filling self-leveling floors is a simple operation. The result is simply perfect, and the wide range of decoration and decoration options make self-leveling coatings a great option not only in bathrooms, but also in other areas.
