The expression "drinking system" refers to devices of a fairly wide range of use. These can be special filtering units for the home or drinking systems for people who play different sports.
Stationary drinking system "New water E220"
This model is a water filter, for which you will have to pay 2500 rubles. Its installation is carried out using a ball valve or tee, which are included in the delivery. The system is connected to the cold water main, which is most often carried out under the kitchen sink. Purified water goes up through the installed faucet. In these filters, water is taken from the water supply, passes through a chain of filter cartridges, and then is supplied through a special tap. This drinking system is intended for complex purification of tap water from mechanical impurities such as rust, sand and silt.
Additional Features
Water after filtration will be freed from inorganic, as well asorganic substances, heavy metals, chlorine impurities, which will depend on the modification of filter cartridges. The latter are used sequentially, due to which they can have different purposes and degrees of purification. The stationary drinking water supply system has filters and is capable of providing excellent cleaning performance, it has a low cost and a huge resource. If we compare its cost with the prices of bottled water, it can be noted that the price of water from such a drinking system will be 20 times lower. Among other things, its quality is often much higher.
Main characteristics of the drinking system brand "New Water E220"
The drinking system described above has many advantages, among them:
- fixed connection;
- multi-stage cleaning;
- separate clean water faucet;
- low cost of outlet water.
This unit is manufactured in Russia, so for domestic consumers its cost is several times lower than similar devices manufactured abroad. The productivity of this equipment is quite large, in one minute you can get 2 liters of water. The pressure can vary from 0.14 to 0.8 MPa, which is equivalent to a limit of 1.4 to 8 kgf/cm2. During the installation process, you will need to use plastic stationary pipes and fittings.
Key features of backpack drinking systems
The drinking system can be represented by equipment that is intended to be used in tandem with a backpack. These devices are convenient, productive and efficient. The athlete does not need to stop or slow down to get a bottle, if you need to use the system, then you can drink water from the tube. However, it is important to think about how to choose such a drinking system, because one may be a great solution for a certain group of athletes, and another will be completely unsuitable. In this case, it is necessary to take into account the activity that will affect the volume of the drinking system. For example, for climbers or backpackers, tanks up to 3 liters are suitable, which are represented by tourist drinking systems.
If we are talking about hikers in good physical shape, cyclists or runners, then such a system will be strengthened by a belt, and its volume can be equal to one liter. Non-professional cyclists usually use 1 liter tanks, they take up little space, but cyclists can purchase a small or medium system that fits a fairly large tank with a volume of 2 to 3 liters.
If you are interested in a backpack drinking system, then you should consider how many fluid ounces you will need during sports training. If the volume of the tank is equal to the limit from 1 to 1.5 liters, then you can use 34-50 fl oz. This choice will be a good solution for children, as well as people who drive around the city.over short distances. Tanks of this size are also suitable for non-professional cyclists who aim to reduce weight.
Solution for most
The most common tank size is the 2 liter capacity which yields 68 fl oz. This is the optimal balance of volume and weight. This amount of water will be sufficient for most cyclists. If you do not want to stop to replenish the system during sports walks or bike rides, then it is best to choose a three-liter reservoir, which contains 102 fl oz.
Overview of drinking systems for a backpack
If you are interested in a drinking water system for a backpack, then you can pay attention to Cyclotech, which costs 700 rubles. This soft system has a flexible hose and valve, the last of which is leak-proof. The equipment has a passive valve. The outer cap completely eliminates the possibility of dirt and dust ingress during movement. This system will be convenient to use, as it is combined with a backpack, and the reservoir has an optimal volume, which is 2 liters.
Another option is to consider the FFW MOLLE 70OZ hydration pack, which is a true survival kit. This item is made in the United States and comes with a camouflage case. Inside is a plastic container that holds approximately 2.1 liters of water. For ease of usethe manufacturer has provided for the presence of an elastic cover, which allows, if necessary, to connect the hydrator tube to a standard plastic flask. It is noteworthy that this drinking system can even be used in conjunction with a gas mask.
Another drinking system for running is HYDRAMAX 120OZ, which costs 1800 rubles. and has a camouflage cover. The system is completed with a pocket with a fastener. The inner tank can hold up to 3.55 liters of water. The system can be worn on the shoulder straps behind the back, like a backpack.
Characteristics of central drinking water supply systems
Such systems should ensure the receipt of water from natural sources, its further purification and supply to places of consumption. To perform these tasks, special structures are used, which include water intake components, water intake facilities, water treatment facilities, water conduits and water supply networks, as well as towers and reservoirs. Domestic water supply systems may vary depending on natural conditions and the nature of water consumption.
The source of water supply, its power, nature, quality of water and the distance to the object supplied with water have a huge impact on the water supply scheme. According to the method of water supply, such systems can be gravity, pumping or zone. In the first case, water flows by gravity, in the second, water is supplied mechanically, and in the latter, it can flow by gravity into some areas and with the help of pumps intoothers.
Centralized drinking water supply systems may differ in the nature of the sources used, for example, water can be obtained from lakes and rivers, artesian wells and springs, as well as mixed types. If we are talking about cities and populated areas, then such systems are of a combined type, they are combined in the economy into fire water pipelines. Water is also supplied from them to industrial enterprises, if the latter consume a small amount of water.
Conclusion
The use of a combined-type drinking system is justified in cases where the water production network has a small number of branches, in which case water is supplied only to large water consumers.
