Lightning broke: how to fix it at home?

Table of contents:

Lightning broke: how to fix it at home?
Lightning broke: how to fix it at home?

Video: Lightning broke: how to fix it at home?

Video: Lightning broke: how to fix it at home?
Video: How To Fix A Broken iPhone Charger Cable 2024, December
Anonim

It's hard to imagine clothes without a favorite zipper. She has a lot of positive characteristics: reliability, compactness, beautiful appearance and much more. It is used in the manufacture of jackets, coats, jeans, skirts, dresses, bags, wallets, shoes and other necessary items. If the lightning broke, how to fix it yourself and quickly is the first thought that comes to mind.

lightning broke how to fix it
lightning broke how to fix it

Sometimes a clasp can bring a lot of inconvenience, as it has one feature - it breaks when you least expect it. And then the search for information that will help correct the situation begins. Lightning broke: how to fix it? First of all, you need to understand the causes of the breakdown. In some cases, it fails, as the maximum period of use has been exhausted. Sometimes a brand new zipper just breaks. In this case, it is unlikely to be repaired.

Lightning Breaks: Repair

If the lightning broke, we will tell you in the article how to fix it. If this unpleasant phenomenon happened, then there is no need to immediately run to the workshop and change it. Start by tapping on both sides of the zipper with a hammer. The blows should be light so as not to violate the overall integrity of the product.

After that, use pliers to press the dog on both sides. This will make the gap smaller - the zipper will be pressed more when fastening. This operation can only be done once. Since when you squeeze it again with pliers, the dog will simply fall apart. Therefore, if you have already pressed the dog, prepare the slider in advance, just in case.

the zipper on the backpack broke how to fix it
the zipper on the backpack broke how to fix it

List of possible lightning failures

Let's say you have a problem: a plastic zipper comes loose. How to fix such a clasp? To do this, you need to carry out the following procedure. First you need a solution of rosin, which you need to coat the zipper. Plastic fasteners are more prone to breakage. Therefore, they require careful attitude of the owner.

If suddenly a tooth pops out of a plastic zipper, then in that place it is necessary to make a few stitches with a fishing line. Such repairs will delay the complete replacement of the zipper for some time. If it constantly diverges, while it is very difficult to fasten it correctly, then most likely it is necessary to replace the slider itself. To do this, select the part of the appropriate size. If there is a number on the inside, thenthis is much easier to do. This value corresponds to a certain size. If suddenly the lightning came off the base, then you can repair it by simply sewing it on with a machine thread.

plastic zipper diverges how to fix
plastic zipper diverges how to fix

Prevention measures for lightning

In order for the zippers to serve us for a long time, it is sometimes necessary to clean them with an old toothbrush. After that, a candle made of wax or paraffin should be held along the entire length of the fastener. Never use extra force to open and close a zipper. This will not speed up fastening, but only bring the breakage time closer. If the zipper on the backpack suddenly broke, you now know how to fix it. After all, these tips are applicable not only for clothes, but also for other products.

Where do lightning most often fail?

The most popular item of clothing that often has zippers is pants. Repairing a split zipper on jeans is easy and simple. If the slider spontaneously unfastens, then a loop made of any tape must be attached to the tongue. When fastening, it must be put on a button, and after that, fasten the jeans. So it will perform its direct function. In this case, the tape will be completely invisible.

fix split zippers on jeans
fix split zippers on jeans

If the tongue from the slider itself is lost, then it can easily be temporarily replaced by an ordinary paper clip. Anglers always have clockwork rings available that will also work. Just attach it to the base of the slider and you can use the thing further. If tonguelost in a less visible place, just a thick thread tied will do.

If the base is damaged and the zipper is broken, how to fix it? You don't have to ask about it. The answer is simple - you should apply any colorless varnish to the damaged area and wait until it dries. After that, slowly try to fasten. If everything worked out, then great. If it was not possible to fasten, then the procedure must be repeated again.

Thanks to the above simple methods, you can quickly and independently cope with a breakdown. After all, no matter how much you take care of, and everyday use of a thing leads to wear and tear.

Recommended: