Impregnation for wood for interior use is a composition that does not form a film on the surface of the material. By its consistency, it should be liquid and well absorbed into the body of wood to the most impressive depth, which distinguishes it from varnishes and paints.
Features of wood impregnations
When choosing compounds for processing wood elements that are used indoors, you should not count on the fact that they will protect the surface from ultraviolet radiation. This is due to the fact that there are no strong biocides in such impregnations. However, wood impregnation for interior use may have its own chemical composition, which determines the purpose.
Appointment of wood impregnations
Impregnation can be designed to protect against decay. The composition of this bioprotective oil includes ingredients that prevent the occurrence of fungus and mold. Wood is also afraid of insects. If there is a possibility thatthat products made from this material can be affected by bugs, then it is worth treating them with insecticides. Sometimes it becomes necessary to cover material that has already been affected by pests, then only surface treatment cannot be dispensed with. Fire impregnation for wood perfectly saves products from fire, however, it is worth considering that such compounds are water-soluble. Wood, of course, will not become completely non-combustible, but the period until the moment of ignition when exposed to fire will be increased.
If there is a need to reduce the consumption of paintwork, which is supposed to be used in the subsequent finishing of wood, then it is worth choosing a primer impregnation with the appropriate purpose. After its application, varnishes and glazes intended for wood can be used for coloring. After preparation by impregnation, the varnish will lie more evenly, absorb well and do not form stains (this is confirmed by the reviews of many consumers). If you have to paint pieces of furniture, then it is necessary to prepare their surface with the help of impregnation without fail. Whereas if we are talking about finishing work, for example, on the floor surface, then the need for impregnation will be determined by the rules and features of the technological process.
Impregnation with linseed oil
Impregnation of wood with linseed oil is done if necessary to improve the appearance of the product. This composition is used as an independent decorative coating. AfterAfter such a treatment, the surface will not only look more aesthetically pleasing, but will also last for a longer period of time. The surface will gain the ability to repel dirt and water. In addition, the oil can be tinted in all sorts of shades.
Reviews say that the described impregnation for wood for interior work allows you to achieve a natural shade of the surface. After carrying out the work, you will receive a product with an advantageously distinguished relief and an attractive texture. The base will be protected from mold, fungi, blue and rot. He will not lose the ability to breathe, but at the same time, the product will acquire water-repellent characteristics. Impregnation will give the product resistance to fading, peeling, drying, cracking. The coating does not pose a risk to human he alth.
Features of use
Impregnation for wood for interior use can be applied in several ways, one of them involves less impressive labor costs and involves the application of two layers. After the first of them is on the surface, it is necessary to leave the base for two days. In this case, the product must be dried under the influence of a radiator or sunlight.
Fireproof impregnation for wood or any other that has a different purpose, should be applied to a pre-dried surface. In addition, the base must first be freed from the old coating. If it is supposed to work with wood that has an oilcoating, then you must first process the sandpaper. Before you start applying linseed oil, you first need to boil it twice, which will speed up drying. Don't start using the oil without mixing it.
Application should be done in a generous layer using a brush. Movement should be directed along the fibers. The tool should be rubbed a little, which will ensure good penetration. After a certain time, when the composition is absorbed, but not more than after 1 hour, the excess amount of oil should be removed using a rag. After the surface of the product to be polished. Wood can be polished with natural wax for a nice sheen.
Tools and materials
Impregnation should be carried out by preparing some materials and tools, among them:
- natural wax;
- impregnation;
- brush;
- skin;
- rags.
Impregnation cost
Depending on what goals you pursue when processing wood, you need to choose an impregnation with the appropriate characteristics. The Pinotex mixture, the price of which varies depending on its purpose, is produced in Estonia. The shade in this case may be different, as well as the composition. When choosing a wood protective agent that can perfectly reveal the texture, you will have to pay about 1,400 rubles. But the composition from this manufacturer with antisepticcharacteristics costs from 1000 rubles.
If you need impregnation for wood, the price of which is somewhat lower, then you can choose the composition of Serbian production. You will have to pay 281 rubles for it. The mixture has universal qualities. The impregnation can also be glossy, its cost is 383 rubles. Such oil from a Serbian manufacturer can be used as an independent decorative composition. According to consumer reviews, the impregnation of the Pinotex brand, the price of which is much higher than that of analogues from other manufacturers, has excellent qualities, and you can buy oil in containers of different sizes.
If you properly prepare the wood and apply impregnation according to all the rules, then the product will last a long time and will look very attractive.
