Such an agricultural device as a walk-behind tractor has not lost its popularity at all over time. On the contrary, the development of technology has ensured the emergence of new popular mechanisms with a wider range of functionality.
As you know, with the help of this machine you can perform a number of tasks: transport goods, till the soil and just use it as a vehicle. Since this equipment is most widely used in rural areas, you should figure out exactly how to make such a part as a cutter for a walk-behind tractor with your own hands. This structural element has many useful properties, but it is rather unprofitable to purchase a ready-made device from a financial point of view, which explains the need for self-assembly.
The main functions of cutters for walk-behind tractors
This type of equipment is attached, so that at any time it can be dismantled and replaced. The cutter is an extremely important part of the walk-behind tractor, since in the process of operation it directly affects many factors:
- quality of tillage;
- ease of transport managementmeans;
- condition of the walk-behind tractor transmission;
- stability of the vehicle engine.
Many owners knowingly wonder how to assemble a cutter on a walk-behind tractor with their own hands. Only with the help of this element it is possible to qualitatively loosen the earth and prepare it for sowing, simultaneously removing all weeds.
The main part of any soil cutter is knives. For walk-behind cutters, you can find different samples, made, however, using a similar technology. The quality and depth of tillage directly depend on what material is used in the production process.
Advantages of cutters for walk-behind tractors
Among the indisputable advantages that these parts have, it is worth highlighting the following:
- cutters do an excellent job with weeds, destroying them without a trace;
- the soil treated with such an element is well loosened, which contributes to the mixing of its layers and has a positive effect on fertility indicators;
- Using these knives, you can easily distribute fertilizer.
In addition, by making such a part as a cutter for a walk-behind tractor with your own hands, you can be sure that it will cope with absolutely any type of soil, be it clay, moist or very hard ground. Due to this, walk-behind tractors equipped with such devices are common in regions with a wide variety of climates and natural conditions.
Types of cutters forcultivator
The development of agricultural machinery was reflected in the design of such equipment. So, there are several varieties of cutters, but the most common of them are two:
- Saber blade system.
- Cutters, referred to among consumers as "Houndstooth", due to their unusual shape.
The first product is extremely common among consumers, in large part due to the fact that it can be used to perform almost any task. At the same time, a saber-shaped cutter for a walk-behind tractor is assembled without any difficulties. One of the advantages of its design is the ability to remove the knives at any time, since they are made of steel, which, as you know, cannot be processed by welding.
Cutters for the Houndstooth walk-behind tractor are more modern products. The main purpose of such a mechanism is the processing of hard soil. When operating this model, it is important to remember that it is necessary to work with it only on flat and clean ground, otherwise there is a possibility that weeds will constantly be wound around the knives. This product is perfect for planting crops and can be used even in the cold season.
Materials for assembling cutters
Before assembling the cutter on a walk-behind tractor, it is necessary to measure the parameters of the area that is planned to be processed, and only then, starting from the data obtained, assemble the mechanism. To designwas as correct as possible, you need to have the following list of materials available:
- not very long metal tube with a diameter of 42 mm;
- details that will act as elements of loosening the earth;
- welding machine;
- Bulgarian.
Dealing with how to properly assemble cutters on a walk-behind tractor, many owners are wondering about the arrangement of soil rippers. The basis of these parts may well be the springs for the car, which are bent and then welded to the main pipe at the right angle.
The process of assembling cutters for walk-behind tractors
To start work, as mentioned earlier, you need to take measurements of the site. After all the calculations, you can start the assembly. Using a welding machine, the knives of the future cutter should be attached to a pre-prepared pipe. You can first sharpen the edges of the elements to the desired degree.
The resulting mechanism is fixed on the hitch assembly, and the work can be considered completed. To make sure that the whole system is functioning, you can test run and adjust the device.
When assembling such a design as a cutter for a walk-behind tractor with your own hands, it is worth remembering that you can achieve the longest possible service life of the product only by strictly observing all the rules for its operation. When turning on the mechanism, the knives must be kept at the top and in no case should they be allowed to touch the ground. Having started the walk-behind tractor, the cutter can be slowly lowered and get to work.
Additional recommendations
The easiest way to assemble such a device would be someone who has some experience in the field of metalworking. A pre-drawn scheme, as well as high-quality tools and materials, will simplify the installation process.
When deciding how to properly assemble cutters on a walk-behind tractor, many owners are faced with the problem when it is not possible to make small and curly parts of the structure on their own. To do this, it is best to seek the help of a professional blacksmith who will do this work much faster and better.
In addition, do not forget that an incorrectly assembled system entails a change in the direction of rotation of the knives, which, in turn, is fraught with equipment failure.
Having studied all the above recommendations, we can conclude that it is absolutely realistic to design such a mechanism as a cutter for a walk-behind tractor on your own, it is only important to observe all the subtleties of the work, and then the device will last for decades without the need for repairs.
