The bathroom in people's minds is a model of cleanliness. Perhaps that is why sanitary ware manufacturers offer bathroom equipment in traditional light colors. White color is a classic color of bathrooms, however, as well as the baths themselves. Over time, many people have a problem how to whiten the bath at home.
A bathtub in the process of long-term operation, like any plumbing, loses its whiteness and attractiveness. This happens under the influence of water, which is hard and with impurities, under the influence of household chemicals and elemental dirt. Enamel coating, seemingly durable, eventually gives way to hard water and washing powders. And that's when the question arises of how to whiten the bath at home. Minor dirt can be easily removed with baking soda, it will gently dissolve dirt without harming the enamel itself. Soda is diluted with water to the state of slurry and applied gently to the surface to be cleaned, the dried slurry is removed with a sponge. Typically, this procedure will need to be repeated several times.
Yellowness and rust stains are traditional problemscast iron baths. If yellowness appears, how to whiten the bath at home? To remove it, it is recommended to use citric acid, it is applied to the rust stain and washed off with water after 7-10 minutes. This method will preserve the enamel coating, but you will have to carry out this procedure more than once. To remove yellow and gray stains, it is recommended to use a creamy suspension intended for cleaning ceramic surfaces. Cleaning with a soft brush won't damage the enamel, but it will take a lot of effort.
If yellowness reappears over time, then you will have to think about the purity of the water and maybe even install filters. Another option on how to whiten a bath at home can be a people-tested method using whitening paste. For its preparation, it is necessary to mix ordinary and soda ash, vinegar and powdered bleach in equal proportions. The slurry obtained in this way is evenly applied to the surface to be cleaned for 15-20 minutes, then removed by rinsing with water. The freshness of your bath from such cleaning will last for several months.
If you have to deal with an acrylic product, then you don’t need to use a brush often, but over time, the question will still arise how to whiten an acrylic bathtub. Such a bath cannot be cleaned with products containing abrasives - the surface layer will be broken, and the bath will be covered with microcracks. Acids, alkalis and chlorine are also contraindicated in acrylic baths. Dishwashing detergent will return whiteness and freshness to such baths.
Also quite often the question arises of how to whiten the seams in the bathroom, which spoil the overall look. The bleach prepared as follows effectively copes with this. Half a glass of soda is taken for 7 glasses of water, stirred well, after which a third of a glass of lemon juice is added and stirred again. At the end, another quarter cup of food vinegar is poured. Wipe the seams and tiles with a soft cloth dipped in bleach, it is recommended to work with rubber gloves. If you have a steam generator, you can bleach the seams with a jet of hot steam.
