The router was invented back in 1818. Since then, it has undergone significant changes. Not so long ago, this equipment could only be found in the workshops of professionals. However, already today, manufacturers have worked on simplifying the design so that people who know a lot about wood processing can use it. This also made it possible for the router to acquire one of its important advantages - an affordable price.
Now there is no need to turn to professionals to implement a certain range of tasks. Previously, you had to overpay for the services of a milling cutter, but today you can solve the problem without leaving your own workshop.
Wishing to make a purchase and facing the choice of such a device, first of all, you should decide on the manufacturer and model of the equipment. It is also important to take into account the main functions that you will use in your work. You should not overpay for a professional model, which has an impressive cost and has a significant weight. It is not very convenient to use such equipment in everyday life, and all its functions are most often not used. Other market offerings includerouter brand Maktec MT360, which will be discussed below.
Model description
The option mentioned above can be used for chamfering, edge-cutting, and grooving of wooden surfaces. The device is characterized by an impressive number of revolutions, which reaches 22,000 per minute. This allows you to process surfaces with the highest quality and speed.
You can use different types of collets with the unit, among which it is necessary to highlight those that have the following diameters: 6, 8 and 12 mm. If it is necessary to perform a parallel cut, it is advisable to use a side stop, which, according to home craftsmen, is very convenient.
Specifications
The Maktec MT360 brand router does not have speed control, as well as maintaining constant speed under load. The lack of these features sometimes forces consumers to incline their choice towards other models of routers. The working stroke of the cutter is 60 mm. The unit weighs only 5.5 kg, which is an average for such equipment. The length of the device is 300 mm. Power Maktec MT360 reaches 1650W.
Before buying, it is important to pay attention to the fact that the router does not have a soft start, as well as a built-in dust extraction pipe. You will have to provide lighting for the working surface yourself, because the manufacturer did not provide for this functionality. The router comes in a box, which is not very convenient for those craftsmen who are used to working outside the home.
Reviews aboutkey features
Before you purchase the router model described in the article, you should pay attention to the main features. Among others, consumers distinguish:
- working precision;
- strength of structure;
- reliability of the router.
As for the accuracy of the Maktec MT360 , it can be said that it is provided by a milling depth limiter. This allows you to achieve accuracy when processing wood. The sole of the tool is made of metal, so you won’t have to argue about the strength and durability of the structure.
Reliable clamping of the side stop is guaranteed by a special regulator, which indicates reliability. The Maktec milling cutter, according to consumers, has a number of advantages, namely:
- low weight;
- high power;
- possibility to work with different types of collets;
- long cable;
- comfortable packaging;
- precise parallel cut.
The last function is provided by the side stop. Home craftsmen emphasize that the low weight of the device does not tire at all during work.
Operating instructions
Before you start working with the tool, you should read the manufacturer's recommendations. You can learn about them from the instructions. The rules for working with equipment state that the work area must be constantly kept clean, it should be illuminated. The power tool must not be used in explosive environments, such as near flammable gases, liquids and dust. The equipment generates sparks which may cause a fire.
The Maktec Router has a plug that must match the outlet. The first should not be redone yourself, as this may result in an electric shock to the operator. The structure must not be exposed to damp conditions and rain. This increases the risk of electric shock. The cord should not be used to drag equipment or disconnect power tools from the mains. The cord must be kept away from oil, heat, moving parts and sharp edges.
Before turning on the device, remove the adjusting keys from the work surface. If the wrench is caught in the rotating parts of the machine, it may cause serious injury to the user. Its capabilities should not be overestimated, you need to use the Maktec MT360 manual electric milling machine, holding the tool with both hands. It is important to take a stable position while doing this, which will allow you to control the situation.
The tool should not be overloaded during operation. It will do its job correctly if the loads are not too great. Cutting tools must be kept clean and sharp. They should be properly looked after. Then the tool will not wedge.
After reading the Maktec MT360 instruction manual, you will be able to understand that the bits should be periodically checked for damage or cracks. knives neededreplace if they are deformed. The operator should keep his hands as far away from the rotating parts of the tool as possible. The nozzle of the equipment should not come into contact with foreign objects during operation, except for those being processed.
Mounting the router to the work surface
If you were among those craftsmen who wondered how to attach the Maktec MT360 to the table, then you should familiarize yourself with the manufacturing technology of such an addition. To do this, you need a tabletop. It will act as a working plate. Further, birch plywood or MDF is needed, the thickness of one of which should be in the range from 19 to 25 mm. It is better to use a plastic-coated panel, this will reduce friction resistance. If you choose a plate laminated on both sides, it will not warp during operation.
Working on the base
You could read the reviews about the Maktec MT360 above, but they are not the only thing you should know about for the successful operation of the tool. For example, experts advise supplementing a hand tool with a work surface. To do this, you need a countertop, which is installed on the frame. The portable table will be stored on a rack and mounted on a workbench for work.
If you often mill in the workshop and you have free space, then you need to add support pedestals to the tabletop, which will allow you to get a full-fledged machine. Body elements are sawn alongdimensions for a table whose height is 820 mm. Parameters can be changed to set the countertop on par with other equipment.
The surface is laid upside down. Side panels are installed sequentially, they should be fixed with screws. The base is fixed, the frame is shifted with the front side down. At the final stage, supports are attached to the bottom of the hull using roofing screws. Wheel mounting pads must be spaced 20mm or more from the edges.
Table addition with mounting plate
The characteristics of the Maktec MT360 were presented above, but the master should know not only about them, but also about how to make the router stationary. Once you have done all the above work, you can supplement the design with a mounting plate. It will allow to ensure the overhang of the cutter, which is made of 6 mm duralumin, monolithic polycarbonate or getinaks.
It is necessary to cut a square-shaped blank with a side of 300 mm from the material. The element is laid on a workbench and glued on top with double-sided tape. In the plate with a drill, the diameter of which is equal to the fasteners, it is necessary to drill holes. The sole is removed, and then recesses for the caps are made with a large drill.
Assembling the structure
The description of the Maktec MT360 will make it clear that the design provides for the possibility of supplementing it with a stationary table. In the next step, the plate is screwed to the connected instrument. The plate is placed on the tabletop so that you have the opportunity to trace its outline. This will help to mark the position of the element and drill the hole. The ends are processed with a file and sandpaper.
In closing
With the router you will be able to perform a wide range of tasks. You will be able to select quarters, drill holes, carry out rough grinding and make grooves, slots, and folds.
Before choosing a router, you should think about how often you plan to use it. This will influence which model you prefer. If you will get the tool quite rarely, then the household model will fit perfectly, but for those who are used to working not only at home, but also outside it, a semi-professional or professional version of the device is perfect.
