Facade tile "Canyon" is also called facing artificial stone. This material is used as a composite finish to protect facades from the negative effects of the environment. If you want to improve the appearance of your home and make your home warmer and soundproof, then the solution mentioned above is the best.
Positive feedback
According to users, Canyon facade tiles can increase the thermal insulation of a building by thirty percent or more. The final figure will depend on the material at the base of the walls. What kind of finish can be used for a long time, as practice shows, the lining can last more than fifty years. The material is versatile. It can be used for wall cladding both outside and inside the building.
Home masters note that installing products is quite simple, and you can do it at any time of the year. You can fix the material on the wall fromany material. Customers really like that products can be made in imitation of stone, masonry or brick, as well as any other natural material. After reviewing the range, you can choose a specific color, the shade of which will match the exterior and design of the building. You may not have a question about whether the tile is suitable for concrete, wood or brick. Since Canyon products can be attached to any of the listed bases.
Users very often compare this tile with natural stone, but the latter is much more expensive, and also has an impressive thickness, which is why it is difficult to cut. This cannot be said about the described tile, which is easy to process, light in weight and thin. The last parameter can vary from 1.5 to 5 millimeters.
Why choose the Canyon tile?
Facade tiles "Canyon" does not have a strong impact on the foundation of the building, which sometimes needs to be strengthened, which is true when it is necessary to finish the external walls with natural stone or any other heavy material. The described tile is on sale in a variety of forms, this includes products with metal fasteners that facilitate the installation process. This finish is excellent for freezing weather, rain and can be wet cleaned.
Installation technology
Facade tile "Canyon" is installed on the crate, for which you should prepare a board with a section of 100x25 millimeters. You can also use a galvanized profile 67x28 millimeters. In the first case, the elements are treated with antiseptics, which must be done even before they are installed on the wall. When the frame system is installed on a wooden wall, wood self-tapping screws should be used to fasten the battens, the length of which varies between 70 and 100 millimeters.
If the crate is supposed to be installed on a concrete, brick or stone wall, then an impact dowel should be used for fastening, the length of which is from 100 to 150 millimeters. When choosing a type of wood for the frame, it is best to stop at pine, as it is easy to process, it is easy to screw fasteners into it and cut it. Such boards do not change their original linear dimensions when the temperature changes. When installing Canyon façade tiles, which are often the most positive reviews, the distance between the boards will depend on the dimensions of the products you want to attach.
Specialist recommendations
Given the fact that the walls are not always perfectly level, it is best to use wedge-shaped stands when installing the frame. If the walls have impressive irregularities, then it is best to make a crate from a galvanized profile, which is installed on perforated consoles. This type of fastener allows leveling the plane.
Markupsurfaces
Installation of the facade tiles "Canyon" is carried out only after the installation of the frame system, for this it will be necessary to carry out the markup. To begin with, a control line is drawn, along which the master will be able to navigate when installing the first row. If the length of the walls is large enough, then a two-meter level for drawing the starting line will not work. To do this, prepare the hydraulic level. At the desired height, a control mark is set, which is then transferred to all corners of the building. Draw a line between the marks with a masking cord.
Work methodology
Facade tile "Canyon", a photo that can be found in the article, is fixed on galvanized self-tapping screws with a press washer. For a metal and wooden frame, the screws will be the same, however, for galvanized profiles, you should choose not pointed, but with a gimlet. It is necessary to start installation work from the bottom corner, moving to the side and up. The first product is fixed with four self-tapping screws, while the subsequent ones are strengthened with two. This is because you will be using interlocks for installation.
Each row of installed products must be checked with a long level in order to follow the overall line and not violate the geometric proportions of the finish. The facade tile "Canyon" is quite common today among the owners of private houses; finishing the house with its help can be done by each master independently. It is important to take into account certain features of the technology. For example, to finish the corners, you need to stock up on corner elements. If it is necessary to adjust the products in the corner, the tiles should be cut with an angle grinder with a diamond disc. Finer coated discs should be used for this material.
For reference
If the house needs insulation, then initially it is necessary to make a crate for insulation, using bars of the required thickness. The distance between them should be 5 millimeters less than the width of the mineral wool. As soon as the facade insulation is installed, it should be covered with a vapor barrier film, which is nailed to the crate system with a stapler. After that, you can proceed with the installation of the tile frame.
Alternative mounting method
Today, a wide range of Canyon facade tiles is offered for sale, installation on self-tapping screws of this material is not always done. If the walls are fairly even, then you can use an adhesive solution to install the products. With its help, the work will be carried out in the shortest possible time. However, if there are even the slightest surface irregularities, then the consumption of the adhesive solution will be increased, which will lead to additional financial expenses.
Initially, marking is carried out using the same technology that was described above, and then you can start laying the material. Sometimes walls need additional preparation, they are coated with a primer to increase the adhesion of materials. Do not start work if the surface is highly porous.
Conclusion
Facade tiles from the manufacturer "Canyon" has a concrete structure, which is why it is not subject to fire. This feature of the finishing material is relevant for private houses. After completion of the installation work, the walls will be protected from the effects of fire. Such facades are several times stronger than facades equipped with vinyl siding. If you decide to use a wet method of fixing the finish, then it is important to remember that you will not be able to insulate the walls, and also take the dew point outside the facade, which is necessary in order to prevent freezing of the walls.
