Faced with some new concept, a person is looking for an answer to a question related to it. One day, one of them may be the question of what are registers? In this case, we are talking about an element of the heating system, which consists of one or a number of smooth-walled pipes. They are connected to each other in parallel. The register, in one form or another, is the basis of most heating radiators. It turns out that the heating battery is a register to which (in one form or another) metal elements are attached. This allows you to significantly increase the heat transfer area.
What are registers and where can they be used?
This element can be an ideal means for heating not only in technical and industrial premises, but also in private homes. They are widely used for heating small apartments, as well as individual rooms equipped with autonomous heating systems. This is due to the fact that such solutions are considered to be effective only when they have a sufficient amount of coolant, the return of which is high.in due measure. A large volume of coolant in autonomous systems requires a significant amount of heating energy, as well as a long cooling time, and this ensures a long-term transfer of accumulated heat to the room. Pipes of large diameter, but with a limited length, make such systems more reliable, compact and economical.
Speaking about what registers are, it is worth comparing the efficiency of space heating with their help. It is important to note that it is slightly lower than traditional radiators. This can be explained by the fact that the heating registers do not have an additional metal area. However, the possibilities of their application and ways to increase heat transfer have a very wide range. It is possible to attach additional metal plates to the smoothbore pipe during the manufacture of heating devices, which will increase heat transfer significantly. If you use general-purpose registers by connecting many thinner tubes in parallel, you can not only create an efficient system, but also give it a decorative effect. They are sometimes called tubular design radiators, but are used for decoration and as heating devices in public buildings.
Understanding what registers are, it can be noted that usually these are pipes with a diameter of 32 millimeters or more. That is why in heating systems, main lines made of smooth-bore pipes can alreadytreated as registers.
Application
Since the registers are several pipes placed in parallel and interconnected, they can be quite successfully used in autonomous heating systems, both single-pipe and two-pipe. It is appropriate to use them in houses with any number of storeys. Increased strength allows you to install registers in rooms with a central heating system.
