Brickwork can make the interior unique and give it a twist. If we are talking about external cladding, then it can be done using different types of bricks. Whereas indoors it is not always possible to use such a heavy finish, because the additional load on the floor can lead to adverse consequences.
But there is a way out - you can use an imitation of a brick wall, it is quite possible to do such work with your own hands. This finish can be done in several ways. The final result will depend on your imagination and your own preferences.
Preparing
Before starting repairs, you need to take care of the availability of appropriate fixtures that will be needed for decorative cladding. Depending on the chosen method, the list may vary, but in general you will need:
- paint;
- gypsum;
- brushes;
- glue;
- soap solution;
- level;
- Vaseline.
You should also take care of the availability of a form fordecorative bricks. The size is chosen at your discretion. The walls and bottom of such a product must be smooth. For the form, you can use moisture-resistant plywood. Fasteners should be located outside. Seams are filled with moisture resistant silicone sealant. You will also need a container where you will close the mixture.
The easiest way to simulate masonry
The most common option for decorating a wall in the described way is protruding cladding elements on plain wallpaper. With your own hands, brick and plaster walls can be made. The technology remains the same. You can also use a painted wall as a base. In this case, there is no question of the volume and realism of the masonry, but this method has several advantages.
Firstly, it is quite simple to perform such work. You will need to draw the required number of rectangles with seams on the basis, after which all elements are painted in the desired color. Not to mention the versatility. Bricks and seams are depicted in such a way as to obtain the dimensions of the products that are most acceptable, in your opinion. If you decorate a brick wall with your own hands in this way, you will get another advantage, expressed in budget. The money will have to be spent only on the purchase of paints and brushes.
But this method of imitation of a brick wall with your own hands has its drawbacks - the cladding is not very natural, so this type of cladding is most often used in householdrooms by the type of dressing room or rest room in the bath. For living rooms, it is recommended to choose a more effective method of masonry imitation.
Performing decorative plaster bricks
If you want to make a brick wall with your own hands, you can use gypsum as a material. Products will be homemade. But such work requires special skills and some financial costs from the performer.
First you will need to prepare a mold for the bricks. The thickness of the element can reach the limit of 5 - 20 mm. If the brick has a lower height, it will quickly break, while the use of more impressive dimensions will cause the plaster to be overused for grouting.
When too large bricks are used, it also visually reduces the area of \u200b\u200bthe room. The next step is to prepare the solution. To do this, dilute dry gypsum with water to a state that looks like thick sour cream. The form prepared at the previous stage is lubricated with soapy water or petroleum jelly, and then filled with the finished mass. Alignment should be done with a regular ruler.
The form is left for half an hour, and then turned over. It will be possible to remove the finished cladding elements from it. The brick can be left intact or painted in the desired color. To obtain the desired shade, sometimes products are dyed in several layers. If desired, and to protect the brick from moisture, you can varnish it.
Performing lining
Before you start decorating a brick wall with your own hands, you must mark a separate area of \u200b\u200bthe surface. A starting line is laid down in the lower part, which will indicate to you the place from where you should start laying stones. To fix bricks, use a special adhesive or tile mix.
The first row is laid out in compliance with the width of the seam, all subsequent rows must be mounted in a checkerboard pattern. Use a notched trowel to spread the adhesive over the wall surface. For greater effect, you can break the extreme bricks in each row so that their edges look uneven and torn. Leave the finish to dry for up to 3 days. You can find out the drying time of the glue by looking at the instructions on the package.
Instructions for decorating a wall of foam bricks
If you want to know how to make a brick wall with your own hands, then you must be wondering that Styrofoam is also suitable for this. The recommended size of these bricks is 150 x 70 mm. If you use larger elements, they will look unnatural.
Bricks are made quite simply. Markings should be made on the tiles, which will help the gel pen. It is necessary to leave allowances for tile seams. A toothpick pushes straight lines. In order for the lining to look realistic, it is necessary to make a crush. For this, a lid from a can is used, from which an even strip is cut. Withone of its edges should be cut off the edges, making a kind of 2 mm sting. With it, you can form a marking line.
If you wondered how to make a brick wall with your own hands, then you should study the technology of the work. At the next stage, the selected surface area should be lined with previously made bricks. For gluing, the same tile adhesive is used. It is necessary to start work on the installation of the finish from the bottom edge, while the seams are not filled. A gap of 2 mm is left between the bricks. The finished lining is painted, and an increased amount of paint should be applied to the gaps. So it will be possible to create the most realistic imitation of masonry.
Professional Tips on Creating a Fake Wood Brick Wall
Before starting repairs, according to professionals, you need to look at photos of brick walls. With your own hands in this case, it will be easier to cope with the work. From the images presented in the article, you can find out that brick cladding can also be made of wood. If you decide to use this particular material, then you should purchase raw materials. Perfect, according to the masters, plywood.
The blank is cut into the required number of rectangles of the same size. The front side of the elements must be sanded. Marking is done on the wall. Bricks must be laid out according to the markup. The finished masonry is painted or varnished. Imitation of such a wall, according to experts, is notnot only durable, but also environmentally friendly.
Technique for performing imitation of brickwork from tile adhesive
We decorate a brick wall with our own hands, lining with dry tile adhesive. To do this, the powder is diluted in water until a mixture is obtained, the consistency of which resembles thick sour cream. The resulting mass is divided into equal parts, to each of which it is necessary to add a certain amount of pigment. Coloring components must have different shades.
Each of the three parts is stirred. As a result, you should get a mass with interesting stains. The compositions are rolled into pancakes, from which individual bricks with the same size should be cut. They are left until dry. The above steps should be repeated until the desired number of bricks is obtained.
The wall is tiled in the next step. For fixing, you can use tile adhesive. If you want to make such a decorative brick wall with your own hands, then in the next step you will have to fill the seams with a special compound. It is better if this mixture is somewhat darker than the lining elements. The next step is to cover the finish with two layers of varnish.
Finishing
At the previous stages, the technologies for finishing each considered type of masonry imitation were described. But you can use a universal method with which you can achieve a shade that is close in color to a real brick.
Forthis you need to mix light and red ocher. The next step is to add a certain amount of white to the resulting mixture. Decorative masonry is processed using the plugging method. To do this, use a sponge that is dipped into the prepared thick mixture. With its help, the composition should be distributed over the lining.
Brown liquid paint is splattered over the cladding with a toothbrush. To achieve a more natural finish, you can use different paint application techniques for each row. Coloring compositions are applied by tamponing. In this case, the shades can be alternated from row to row. At the final stage, the masonry imitation is covered with several layers of varnish. If there is a desire, then the lining can be made matte by treating it with fine-grained sandpaper.
Using cardboard to create imitation masonry indoors: preparing tools and materials
A do-it-yourself decorative brick wall can also be made using such an unusual material for this as cardboard. In addition to it, you should prepare:
- PVA glue;
- paper napkins;
- pencil;
- paint;
- ruler;
- stationery knife;
- varnish;
- brushes.
You will also need a hot glue gun. The cardboard must be thick, it can be taken by disassembling the packaging boxes. Before decorating a brick wall with your own hands, you must take care of the presence of rods forthermal gun. As for napkins, they should be dense. Instead of a clerical knife, you can use scissors.
Progress of work: surface preparation
The wall where the masonry imitation will be performed must be prepared. To do this, it is cleaned of old wallpaper and finishes, primed or coated with a solution of PVA glue, which must first be combined with water in a ratio of 1 to 2. If there is a wall covered with paint, its surface is cleaned of dust and degreased.
Before you start decorating a brick wall in the interior with your own hands, you should pay attention to the existing varieties of bricks, of which there are quite a few. The choice will depend on which one is right for you. With color, for example, you can experiment, but you need to decide on the size of products right away.
Workflow
If you could not choose the right brick size, you can follow the instructions from the article. It involves the use of bricks that will be laid with a spoon and have dimensions of 228 x 65 mm. Before finishing brick walls with your own hands, you must make bricks of the right size from thick cardboard. Sheets are cut along the marked lines with scissors. The masonry may be continuous. Bricks are glued to the surface with glue for heavy wallpaper, such as vinyl. You can use PVA glue.
In conclusion
In order to independently create an imitation of a brick wall, have specialconstruction skills are not required. You can choose the method you like the most and start finishing, having previously prepared the necessary tools and materials.
