If a piece of metal is rusty, you can get rid of it and buy a replacement. However, this simple solution is not suitable for everyone and not always. How to remove rust? You can save a lot by doing this at home. How to do this is described in the article.
How to remove rust from metal with white vinegar
This method has been relevant for many years. How to remove rust from metal using white vinegar? The instructions below will help you cope with this task.
- White vinegar is known to react with rust and dissolve it. The metal must be soaked in it for several hours. Next, rusty paste is scraped off the product.
- You can dip aluminum foil in vinegar. It will act as a brush to remove rust. This method will allow you to qualitatively clean the product without harm to its surface.
- How to get rid of rust on a large object? To do this, apply vinegar to its surface, thenwait some time. An alternative solution is to clean the product with a cloth soaked in this product.
- It is not necessary to use white vinegar at all. Ordinary will also help free the metal from rust. The damaged product must be soaked in it for a day, and then rinsed thoroughly. This method does not involve the use of intensive cleaning.
Lime with s alt
How to remove rust at home? The next method involves the use of lime with s alt. What is it?
- Damaged areas should be sprinkled with s alt in a continuous layer. Then lime juice is squeezed on them.
- Use as much liquid as you can squeeze out.
- The mixture should be kept on the surface for two to three hours, after which it can be removed.
- To remove the composition and rust from the surface of the product, you can use the peel of a lime. It is highly durable, and at the same time, it will not damage the metal.
Paste with baking soda
How to remove rust from a metal surface? Baking soda shows good results. The product must be mixed with water to such a density that it will be possible to spread it over the damaged areas. It will take some time to pickle, then the paste can be removed. To clean the surface, brush it with a toothbrush and then rinse with water.
How much should I mix baking soda with water? This folk method has noexact recipe. The main thing is to achieve the density necessary for spreading the paste.
Potatoes and laundry soap
How to remove rust? The next method involves the use of laundry soap and potatoes. The following is a guide on how to remove rust from a metal object.
- The potato must be cut in half. Laundry soap is applied to the resulting cut. Then the vegetable is laid out on the damaged area of the metal surface for several hours.
- To clean the next area, cut off the used surface, add soap. Next, the potato is again placed on the product.
- If laundry soap is not available, you can replace it with baking soda mixed with water.
Oxalic acid
How to remove rust from the surface of a metal object? Oxalic acid will also help to cope with this task.
- It is important to take precautions before using this product. Rubber gloves will help protect your hands. You should also wear a bathrobe (any) and glasses.
- Acid fumes must not be inhaled under any circumstances.
- Rusted area cleaned with dishwashing detergent, rinsed thoroughly.
- When the surface dries, you can proceed to the next step. Dissolve approximately 5 teaspoons of acid in 250 ml of warm water.
- The product that needs to be cleaned is lowered into the solution. Next, you need to wait about 20 minutes.
- Alternativethe solution is rust removal with a brush pre-dipped in the solution.
- After processing, the product must be thoroughly washed and dried.
Citric acid
How to remove rust from skates? To do this, you can use citric acid in powder form.
- Work begins with a thorough cleaning, all dirt must be removed from the runners.
- A small amount of powder is placed in a plastic container, then filled with water.
- The water should be hot, it should be enough so that the skids are completely immersed in it.
- The product must be soaked for at least 12 hours, then rinsed and dried thoroughly.
Lemon
You can also remove rust from skates with a lemon. It is necessary to clean it, grind the resulting pulp. Then the juice is filtered through a fine strainer or gauze piece. Instead of gauze, you can use any loose fabric.
Lemon juice is mixed with baking soda in equal proportions. The resulting gruel is gently rubbed into damaged areas. The best way to do this is with a rag. The movements should be smooth, but at the same time with some pressure. The procedure continues until the rust is completely cleansed. Next, the remains of gruel are removed from the runners, the blades are thoroughly washed with water and dried.
Chemical rust remover
Removing rust from metal at home is easy with a chemical solvent. howas a rule, the composition of such an agent includes oxalic or phosphoric acid. We must not forget that it poses a threat to the skin. Protect your hands and carefully follow the instructions that come with the product.
The method of application depends on which remedy is chosen. You can find out by reading the instructions. Keep in mind that etching can take a long time. This method is relevant only when the task is to clean a small-sized product. The main drawback is that the cost of the chemical agent can be quite high.
Transformer
How to remove rust from metal at home? Rust converter is like spray paint. With it, you can prevent damage to the rest of the product, and not clean the affected areas. Using a transducer is suitable for those who plan to paint the surface of an object. In this case, it will take on the role of a primer for the paint layer.
You need to remember that a rough texture will inevitably remain under the paint. Rust will not be removed, it will only be coated.
Abrasive tools
You can remove rust with your own hands using abrasive tools. Their use allows you to effectively clean the affected areas.
- Almost any metal tool can be used to remove rust.
- After the procedure, be sure togo over the surface with sandpaper. It is important to remove all traces of scratches.
- A steel brush can effectively clean a metal surface.
- If you need to free a large object from rust, you can resort to using a grinder.
Diesel fuel
The use of diesel fuel is relevant when it is necessary to remove rust from tools. It is necessary to pour approximately a liter of diesel into the canister, and then immerse the devices that need cleaning into it.
A day later, the tools must be removed from the canister, thoroughly cleaned with a brush. For example, you can use a brass brush. Next, the fixtures are wiped with a rag.
Prevention measures
The above is about how to remove rust. Be sure to take measures that help prevent its formation.
- Metal must be kept dry. If water contacts the surface of the product for a long time, impregnates it, then the formation of rust will not take long. After metal has come into contact with water, it should always be dried thoroughly.
- For protection, apply a primer. For rough surfaces suitable primer putty. For smooth, you can use primer-spray.
- It is also worth applying a layer of paint on the item, it will effectively protect it from moisture.
