To create a comfortable microclimate in an apartment or house, sometimes there is not enough central heating. As an alternative method, you can use electric convectors, which are allowed to be installed not only in residential premises, but also in cottages, pavilions, garages and kiosks.
Why do we need a thermostat
You can adjust the temperature of the convector using a special regulator. Radiators of central heating and electric convectors have long entered the competition, and in this struggle, the latter have a clear advantage. They can be installed in any convenient place, without interfering with movement around the apartment. Modern models can easily fit into any interior. The same cannot be said for water or electric radiators, which sometimes look bulky.
Electric convector selection parameters
Electric heating convectors with a thermostat should be selected according to certain parameters, among them should be highlighted:
- power;
- type of heating element;
- a kind of temperature controller;
- installation method;
- design features;
- protective systems;
- additional features.
More about parameters
Like other electric heaters described in the article, they differ primarily in power. The more impressive this parameter is, the faster the equipment will be able to warm up the room. If you are considering wall-mounted electric heating convectors with a thermostat, it is recommended that you read reviews about them first. So, for home conditions, equipment should be used, the power of which varies from 0.3 to 3 kW. For the correct choice, the parameter must be calculated individually. For every 10 m2 1 kW will be consumed. If the house has gas or water heating, then 0.5 kW is enough to heat the same area.
About choosing a device by power
Experts advise choosing electric heating convectors with a thermostat suchso that their power turns out to be about 15% more than the area of \u200b\u200bthe room requires. So you can set the intensity of work and save electricity. As an example of low-power equipment, it is worth considering the BALLU BEC / EZER-1000 brand convector, for which you will have to pay 2500 rubles. The power of this device is 1 kW. This indicates that the device can be installed in a room with a maximum area of 15 m2. Additional features include a timer, electronic control, and a thermostat.
Selecting a model by location method
Electric heating convectors with a thermostat can be floor, wall, floor and universal. In the first case, we are talking about equipment, which includes brackets. If you want to choose a floor device, you can use the legs on wheels. The advantages of wall-mounted units are that the wires will not get tangled underfoot, while the case will not take up free space in the room. All that will be needed is to fix the case to the wall and connect the device to the network. These convectors are best chosen for apartments that do not have much space.
If you prefer the outdoor version, then the unit will be mobile, but the disadvantage will be that the equipment will occupy free space. An example of wall-mounted equipment can be the ATLANTIC F117 DESIGN 500W model, for which you will have to pay 3300 rubles. This wall mounted unit haspower of 500 W and is intended for a room with an area of 5 m2. It will be possible to control the modes using the electronic unit. As additional positive features, the presence of a thermostat and an economical mode should be highlighted. The device weighs only 3,594 kg, which allows you to install it even on a light partition.
Choosing an appliance by type of heating element
Electric heating convectors with a thermostat can be supplied with different heating elements, namely:
- monolithic;
- tubular;
- needle.
The last option is simpler and cheaper, but its use can be dangerous, because the design heats up and is very fragile. Such products, as practice shows, break down pretty soon, so they do not justify their cost.
More reliable are tubular heaters, which have an average cost compared to needle ones. The only drawback is the noise at the beginning of work, because when heated, the tube crackles a little. The remaining option is the most durable and effective, but also has the highest cost.
As an example of a device with a tubular heater, we can consider a model of the brand ELECTROLUX ECH / R-1500 E, the cost of which is 4700 rubles. The power of the equipment is 1.5 kW, and the device can be used on an area within 15m2. The design assumes the presence of a timer, and the unit can be controlled using an electronic unit. Aluminum is used as the material of the heating element, and the weight of the device is 4.3 kg. This outdoor equipment has an intelligent control unit, an aerodynamic system, blinds and an overheating protection sensor. Such electric heating convectors with a floor thermostat are universal in terms of installation in the room, since they can be placed not only on the floor, but also on the wall. To implement the latter condition, the manufacturer supplies a wall mount.
Selecting a model according to the type of temperature controller
Thermostat is necessary for the device in order for the user to be able to control the operation of the heater. With it, you can set the temperature in the room, which will be maintained throughout the entire time of operation. If the room gets warmer, the controller will turn off the device to save energy.
Today you can find convectors with one of two types of thermostats. They can be electronic or mechanical. We choose wall-mounted electric heating convectors with a thermostat, depending on the cost and capabilities. For example, mechanical thermostats are cheaper and have a simple design. You can change the temperature using a step switch. The disadvantage is the short service life andtemperature error, which sometimes reaches 3 °C. The advantage is that such thermostats do not fail when voltage drops.
Electric heating convectors with a thermostat, reviews of which are quite often only positive, can also have electronic temperature adjustment units. This functionality allows you to set the temperature at a certain level. This addition helps to save energy when it makes no sense to spend money on heating. The error in this case is 0.1%, which is a definite plus. The disadvantages are expressed in the high cost of such equipment and the failure of the thermostat during voltage drops.
An example of equipment with an electronic thermostat is the BALLU BEP/EXT-1500 Plaza EXT model, the cost of which is 5200 rubles. You can install the unit not only on the floor, but also on the wall. He will be able to heat a room whose area reaches 20 m2.
Reviews of some convectors
Electric heating convectors with a temperature controller, wall-mounted Nobo, according to users, are able to work, precisely maintaining the set temperature. Models of this series have a high class of protection against overheating and overloads in the electrical network. As buyers emphasize, all models are designed so that the maximum temperature of the panel does not exceed 90 °C. This eliminates the possibility of getting burned.
No less technologically advanced arefrench electric heating convectors with thermostatic wall mounted. As an example, consider the Thermor Evidence 2 Elec 750 model, whose power is 750 watts. According to buyers, this is quite enough for an area of 10 m2.
