Fecal pumps for dirty water are presented in two modifications: the first is designed for cold drains, the temperature of which does not exceed 40 degrees, while the second is for hot drains, while the temperature level should not rise above 95 degrees.
Consumer Reviews
The main advantage of the described systems is that they are not afraid of solid debris, pebbles that can disable a high-quality drainage pump. On the site, it is often necessary to pump out not only sewage. On the territory of a country house, it may be necessary to service storm sewers, as well as eliminate spring floods in the basements. Fecal pumps for dirty water are also used when it is necessary to drain the pool for the winter, as well as watering the garden, modern buyers really like this versatility.
One stop solution
In order not to buy forsolving each task a separate device, it is recommended to purchase a fecal pump. With it, you can pump out not only clean, but also dirty water, as well as the one that was clogged with silt, household waste and sand. Of course, for pumping drinking water from a well and a well, such a device should not be used for hygienic reasons, however, all domestic needs that may be associated with the supply or pumping out of domestic water can easily be solved by the owner of such a device.
If you are looking at faecal pumps for dirty water in the store, then, according to users, it is best to prefer models that are equipped with grinders. This indicates that semi-submersible systems should not be considered as they are rarely fitted with a cutting mechanism.
Surface and submersible pump specifications
Deep sewage pumps for dirty water are most often equipped with grinders, as they are located inside drains and, when sucked near the inlet, are able to cut through any debris. As for surface models, only one hose will be located inside the drains, the equipment itself will be installed near the cesspool. It is clear that the garbage is initially transported through the hose, only after it is crushed at the exit.
The first option is considered more practical, since you will not encounter such a problem as clogging the hose. If we compare between these installations according to the criterionthe complexity of the design, surface pumps for dirty water are much easier to connect, this also applies to the dismantling of equipment after pumping sewage, the hose can be immediately removed from the water, and then washed and stored.
Submersible Pump Operating Instructions
With a submersible pump, the situation is somewhat different and more complicated. The device must be lowered with a cable, fixed on steel reinforcement, and then dismantled, which involves a complete cleaning of the unit, all this cannot be called a pleasant procedure. However, during operation, this device will not make noise, and the external pump is able to attract attention by its actions.
If you will be choosing a fecal pump for dirty water, then it is worth considering that when buying a submersible option, you will need to stock up on sufficiently strong cables and think carefully about the technique of lifting the device to the surface, which may be needed for maintenance.
Waterproofing specifications
A fecal pump, the average price of which is 4,000 rubles, can be purchased by you at the relevant goods store. If the pump is intended to operate on the surface, then it is not supplied with waterproofing in the factory. This suggests that fog, rain and snow are strictly contraindicated for the device. When pumping out sewage in winter, there is a possibility of freezing of the water inside if the temperature drops belowzero. This may damage the device.
That is why for a house where the owners live permanently, the outdoor option cannot be called too convenient. However, in the country, where they live only in warm weather, such a model will become an indispensable assistant. Before the onset of cold weather, the owners, as a rule, pump out the septic tanks, and then lay the system for storage in the house until the start of the next season.
Submersible pump protection
If you are faced with the choice of a fecal pump for dirty water, then you may prefer the submersible option. In terms of the degree of waterproofing, as well as resistance to aggressive environments, such devices are unrivaled. The manufacturer indicates that the device is designed for a ten-year service life of uninterrupted operation, while the use will take place in sewage conditions without dismantling. Thus, you can purchase such a unit only for sewage, install it in a cesspool and completely forget about it. Automation will work after the level of sewage is above the critical level. As soon as everything is pumped out, the system will turn off.
Such sewage pumps for dirty water, reviews of which, as a rule, are the most positive, suggest the need to equip a settling tank system into which the equipment will pump sewage. If you drop the hose outside the site into a ditch, into a forest or onto a road, the neighbors will report to the appropriate authorities.
When you should not choose a deep pump, or weaksides of immersion models
The deep fecal pump, the price of which is mentioned above, has a negative feature, which is expressed in the difficulty that arises when dismantling is necessary. If questions arise from time to time about pumping water from a pond, watering a garden or draining septic tanks, then you will have to wash the body every time, and then dry it. Such systems are made using very durable cast iron, plastic or stainless steel, but you need to take care of such a device, like any other household appliances.
Instructions for choosing a device depending on power
If you are interested in drainage fecal pumps for dirty water, then you should definitely pay attention to such a factor as the power of the device, the life of the device will depend on this. If you use the equipment throughout the year, as well as carry out pumping every month, then a surface type system will not work for this. Submersible options can have completely different power, the maximum value is 40 kilowatts. This force is enough to lift the contaminated liquid to a height of 20 meters.
So they are suitable for deep cesspools. If you are considering surface fecal pumps for dirty water, then it is important to calculate the power for specific needs. In this case, it is worth considering the depth of the cesspool, as well as the distance to the place where sewage will flow. For example, if the septic tank has a depth equivalent to 8 meters, a hose is needed for30 meters, then you need to make the following calculations: the depth must be added to the length of the hose, and then divided by 10. 11 meters act as the final value.
