Most often in furniture, carpentry and procurement enterprises you can find circular, chain and band saws. In production conditions, such an acquisition will be the most preferable. Chainsaws are affordable, portable and can handle large diameter logs. However, they lose because of the large thickness of the cut, which exceeds 10 mm. In this case, there is one more minus - low productivity, because manual labor cannot be excluded here.
How to make the right choice
Circular saws are more efficient, but they cannot cut less than 2 mm. Their work is accompanied by the production of a large amount of waste. Useful yield is only 55% versus 70% that tape devices can boast of. This can be very expensive if you have to process rare wood species. Among other things, circular saws provide for additional rounding and sharpening of the cutting tool.
Belt units turned out to be the undisputed leader for a reason. Among their advantages should be highlighted:
- performance;
- tool durability;
- safety.
Productivity here is 30% higher compared to other machines. Saw blades, when handled well, blunt and break quite rarely, which cannot be said about discs and chains. Subsequent facing and trimming is not required if the processing was carried out with a band saw. This saves not only energy and time, but also money. In the design of each saw, it has an asynchronous motor that drives a belt drive. This system is quite old, but reliable and able to ensure the longevity of the machine.
Additional benefits
The motor does not provide for maintenance and adjustment before operation. In addition, a band saw is a must for cutting curly cuts. Her canvas does not go from side to side, does not deviate, as happens with files. Not to mention the security. In the case of a band saw, this factor is most pronounced. The tool does not need to be held by hand during use, the workpiece will only need to be guided along the stop. The machine will not jump off and break out, as can happen with a chain saw. That is why, if you need woodworking equipment, you should pay attention to the Corvette 31, which will be discussed in the article.
Description
The above equipment is a saw for safe and reliable work when you need radius or straight cuts in plastics and wood. The device works due to asynchronouselectric motor, which is economical. It does not require regular maintenance.
There are two stops for comfortable work, one is for straight cutting accuracy, while the other is for miter sawing. If you want to make your work more economical and neat, you can connect a vacuum cleaner. This will eliminate the need for cleaning.
Specifications
Saw "Corvette 31" has a power of 350 watts. The size of the desktop is limited to the following parameters: 290 x 290 mm. The maximum cutting depth is 80 mm. This machine has one speed. The transmission is direct.
The diameter of the suction hole is 40 mm. The length of the tape is 1425 mm. The table can tilt from 0 to 45˚. The maximum tape width is 6.3 mm. The equipment weighs 17 kg. The belt speed is 882 meters per minute.
Reviews about the model
Corvette-31 brand saw, according to consumers, has many advantages, among them it is necessary to highlight:
- functionality;
- ease of use;
- sustainability.
As for functionality, it is provided by a rotary stop. Due to this, tape equipment allows cutting parts at an angle of 45˚ or less. Consumers, in their words, also like the convenience in work. The longitudinal stop in this design is necessary for the accuracy of the cut, since the size does not deviate when the element is run.
The Corvette 31 band saw, as emphasized by home craftsmen using this equipment, is stable. The machine can be fixed with bolts if necessary, which will make the installation stable. This will help improve the accuracy of the operations performed.
When consumers consider the Corvette 31 saw, they especially pay attention to the replaceability of the saw blade. These manipulations you can carry out independently and quite simply. The table can be tilted up to 45 ˚ if necessary, which simplifies the processing of workpieces and makes these manipulations more comfortable.
When opening the side cover, the engine will be turned off, for which the limit switch is responsible. After a temporary power outage, the machine will not start. Spontaneous start of work will not happen thanks to the magnetic starter. Band saw "Corvette 31", according to buyers, is stable. The machine can be fixed with bolts, which increases the accuracy of the operations performed. To connect the vacuum cleaner, you can use the nozzle. Customers also like the small footprint.
Description of machine brand 8-31
In order to make the right choice, for example, we should also consider the Corvette-8-31 saw. This model of equipment is a combined machine that has a commutator motor. Its power is 1200 watts. It is capable of reaching speeds up to 5000 per minute.
The tool is compact and lightweight. Among its advantages, one can single out the fact that it combines a trimming machine and a sawing machine. With it, you can carry out oblique, transverse and longitudinal cutting. Safety of work is provided with a protective cover. The blade diameter of the Corvette 8-31 miter saw is 210mm.
Specifications
If you want to purchase a universal machine, you should consider the above equipment model. It is powered by a brushed motor. This unit does not have speed and backlight adjustment. It weighs 9.3 kg. The maximum kerf width is 80 mm, which is correct if an angle of 45˚ is observed. The desktop size is 360 x 250 mm.
This Corvette 8-31 saw does not have a function to maintain constant speed under load. The number of revolutions per minute is 5000. This unit does not have a laser and cut depth adjustment. On the top table, the maximum cutting depth is 31 mm. At a 90˚ angle, the maximum cutting depth will be 55 mm.
Reviews about the model
Considering the features of the Corvette 8-31, you should pay attention to consumer reviews. Among others, it should be noted that buyers consider the machine easy to operate, emphasize its reliability and safety during operation.
As for ease of operation, it is provided by a handle that sits securely in the hand and is complemented by a start button. Not to mention the reliability. The top table of the equipment is made ofcast metal, which guarantees reliability and durability of the device. Consumers, in their words, also like the safety that the machine provides. You will be protected from injuries thanks to the protection of the saw blade. A rather important factor when choosing this equipment is also the presence of a motor brake system.
Feedback on features of operation
Reading reviews of the "Corvette 31", you should also pay attention to us consumer advice on operation. Getting acquainted with the opinions of customers, you will understand that before turning on the device for the first time, they advise you to pay attention to the reliability of the installation of the equipment and the correct assembly. It is important to properly adjust the thrust bearings, guards and saw blade tension to avoid contact with the blade and minimize the risk of breakage of machine components.
The teeth of the saw blade, according to home craftsmen, should be directed downwards. They must look at the table. The band saw handle from Enkor Corvette 31 must be well fixed, there is no play in the desktop fixation area. Before starting work, it is important to make sure that there are no cracks or damage in the saw blade area. If you notice such errors, the tape should be replaced immediately. The upper belt guide and guard, which should not be in contact with the workpiece, need to be adjusted.
Consumers emphasize that the operation of the saw near flammable objects is excluded. The work table must be well fixed duringoperation. It is important to make sure that there are no unnecessary blanks, chips and scraps on the table surface before starting work.
After sawing, the workpiece must not move. This can happen due to the fact that it is not adjacent to the desktop with its entire plane. At the same time, the masters do not advise sawing several blanks. It may be dangerous. It is important to be especially careful when sawing small, large or awkward workpieces. When processing long elements, it is important to use additional supports. This is due to the fact that the sawn off part may tip over from the worktable.
Do not touch the band while sawing. Before turning it on, it is important to make sure that the belt does not touch the surface of the workpiece. Before working, you must start the equipment at idle and let it run for 1 minute.
In closing
The equipment described in the article can be replaced by a similar one, but, as practice shows, it is the most effective and saves effort, money and time. Before buying, it is only important for you to decide which saw with which functionality to choose.
It is important not to make a mistake here. After all, for example, equipment that is designed to solve problems in everyday life is suitable for home use. But in the conditions of production, such a model of equipment will simply not be able to meet expectations.
